B&W P2 BROCHURE

P2

Floor-standing loudspeaker system

Product Summary

●

The P2 Monitor is a loudspeaker system designed for domestic and professional use.

●

The loudspeaker comprises a two-unit system of an elliptical bass and mid frequency
radiator which is individually frequency pen tested and wide band white noise matched
before assembly.

●

Having developed a prototype system which met both the technical requirements and
enthusiastic acceptance by a critical listening panel, the final problem of ensuring that
production units achieved the same standard has been met by an elaborated series of
production tests involving three individual frequency pen tested and final calibration
certificate supplied with each loudspeaker.

Technical highlights

●

Considerable work has been done on the rear loading of the bass and mid frequency radiator
with full reference to modern developments in this field. The final design employed in the P2
Monitor gives a choice of either infinite or resistive vent.

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com

Drive Units

Frequency Response
Nominal Impedance

Treble frequencies: Ionic Unit
Bass and mid frequencies
131/2” x 8 1/8” elliptical unit fitted with
laminated glass cone assembly.
45Hz – 20kHz ±5dB
8 ohms (minimum 7 ohms)

Power Handling

Dimensions
Finish

15W RMS 22.5 watts music.
Floor space 161/2” x 15“
Height: 4’ 2”
Teak or walnut veneers