B&W DM 70 DATASHEET

DM70 Standard/Continental

Stand-mount loudspeaker system

Product Summary

●

The DM70 is new thinking on acoustical distribution pattern especially within the vitally important
mid-frequency region of 400Hz to 5kHz, aiming towards exploring the advantage of an
approximately spherical distribution pattern.

●

All units are designed and built within our factory to ensure maximum quality control and retention
of the exclusive original design

●

The styling and general appearance has been designed to be acceptable in the world market,
resulting in the Standard and Continental versions each available in various finishes.

Technical highlights

●

A mid-frequency unit capable of handling input powers in the region of 35Watts RMS with
distortion factors to the order of 0.5% or lower.

●

The bass radiator is capable of truly complementing acoustical distribution and power
handling without occupying an unduly large enclosure volume.

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com

Drive Units

Frequency Response
Nominal Impedance
Power Handling

Electrostatic mid & HF unit covering all
frequencies above 400Hz
305mm piston diameter bass/midrange
unit
50Hz – 15kHz. Better than ± 4dB,
8 ohms
25 watts

Dimensions

Finish

Standard: Height: 808mm

Width: 815mm Depth: 382mm
Continental: Height: 820mm
Width: 680mm Depth: 390mm
Standard: teak or walnut
Continental: white and walnut

Continental

Standard