Bushnell PP2010, PP2020 User Manual

BatteryChargers

AA RECHARGER

POWERCHARGER

Quick Start Guide

04-13Model # PP2020/PP2010

IMPORTANT SAFETY INFORMATION

Please read this manual in its entirety before operating your Bushnell POWERSYNC product. It contains
important information concerning the setup, operation and maintenance of the product. Keep this
manual for future reference.

• WARNING: This product should only be used with the supplied charging unit and accessories
(not included with all models). Use of a charger or accessories not recommended or supplied by
Bushnell may result in product damage, re, electrical shock or injury, and will void your product
warranty.

• CAUTION: Do not use the product to charge an external device at the same time as the internal
battery is being charged by the AC wall charger.

• CAUTION: Do not operate the product in an environment where temperatures exceed 112o F/45o C

• CAUTION: Do not submerge the product in water, or attempt to operate the product after it has
been exposed to water.

• CAUTION: Do not attempt to open the product. There are no user serviceable internal parts.
Disassembling the product will void your warranty. The rechargeable battery must be replaced
by a qualied technician.

• CAUTION: Check adaptors for correct t and compatibility before using the product to charge
electronic devices. Improperly used adaptors can be a shock hazard and may damage the
electronic device.

• CAUTION: Before operating the product or connecting it to any other device, check to ensure that
all cables are not damaged. Extreme heat, water, petroleum products and sharp edges all have
the potential to damage cables. Do not use any cable with exposed wiring.

• CAUTION: Charge your connected devices in an area away from the direct sun if possible.

• WARNING: EXPLOSION HAZARD! - Do not incinerate any Bushnell POWERSYNC product, or
attempt to use it in a microwave oven.

• WARNING: Bushnell POWERSYNC products are not intended for powering any medical
equipment, life support devices, or any other critical equipment.

• CAUTION: Do not clean your Bushnell POWERSYNC product with anything other than a damp rag.
The use of cleaning chemicals or other products may harm the unit and will void your warranty.

• Do not dispose of any Bushnell POWERSYNC product as you would normal household trash.
Please contact your local government authority for directions regarding the proper disposal of
products containing a Lithium Ion battery.

PACKING LIST

This POWERSYNC model includes the following items:

• BatteryCharger (Model PP2020 or PP2010)

• USB Cable

• AC Wall Charger

• 4 NiMh AA Batteries (Model PP2010 only)

• Quick Start Guide

AC Wall Charger
with USB cable connected

1

HOW THE BATTERYCHARGERS WORK

The PowerCharger (PP2020) with internal power source (Lith-Ion battery) and
the AA Recharger (PP2010) with removable power source (AA NiMh batteries)
store electrical energy, so it can be used to recharge your portable electronic
devices whenever you’re away from your home or campsite. Press the orange
lid latch button on the side of the battery charger to access the Input and
Output ports as shown below.

INPUT-Used for charging the BatteryCharger’s

internal battery from wall charger.

FROM WALL CHARGER

USB PORT

(standard USB plug)

TO BatteryCharger

INPUT PORT

(micro USB plug)

OUTPUT-Used for charging your device(s)
from the BatteryCharger’s internal battery

(once charged via AC wall charger)

FROM BatteryCharger

OUTPUT PORT

(standard USB plug)

TO PORTABLE DEVICE

CHARGING PORT*

(micro USB plug)

PP2020

PP2010

Field Light

INPUT

OUTPUTS

Field Light

* Use USB charging cable included with your
device if this connector is not compatible.

INPUT

OUTPUT

Lid Latch

Button

2