Bush CD608 Instruction manual

Instruction manual

Bluetooth Micro System CD608

You’ll soon be enjoying your new Bluetooth Micro System.

It all begins here, with your instructions. Don’t worry, there’s
nothing too technical coming up. Just simple, step-by-step
guidance to get you up and running quickly. Sound good? Then
let’s get started.

Help and Guidance

We’re here to help you get the most from your Bluetooth Micro System. Should you
require any guidance, a simple solution can often be found online at:

www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0345 600 3021.

Contents

Safety Information

1

General safety information 8

Moisture and water 8

Heat sources and flames 8

Ventilation 9

Positioning the Bluetooth Micro System 9

Power source 10

Getting to know your Bluetooth Micro System

2

Power connection 17

Initial set-up 17

Change the mode 17

Adjusting the volume 17

Mute 18

Equalizer or EQ setting 18

Set the clock 18

Sleep timer 18

Using headphones 19

Connect to a Bluetooth device 19

Using your Bluetooth Micro System

3

CD Mode 24

Play a CD 24

CD controls 24

Programmed play mode 25

Repeat and Random modes 26

Remove the CD 26

Contents

Caring for compact discs 27

FM Radio mode 27

Wire radio aerial 27

Tuning to an FM station 28

Storing an FM station preset 28

Tune to an FM station preset 29

Bluetooth mode 29

Listening to Music/Audio using Bluetooth 30

Delete all paired Bluetooth device records 31

Aux in mode 31

Other information

4

Technical specification 34

Product support

5

Troubleshooting 38

Help and assistance 39

Disposal 41

Your Bush Guarantee 42

This page is left intentionally blank

1

Safety information

Safety information

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Safety information

Important - Please read these instructions fully before
installing or operating

General safety information

• Keep the product and all its parts out of reach of small children.

• This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety.

• Do NOT place foreign objects into the CD compartment.

CAUTION

Never touch or look into the optical lens within the CD compartment.

This is a CLASS-1 laser product.

Use of controls or adjustments other than those specified herein, may result
in hazardous laser light beam exposure. Do NOT open the cover and do NOT
attempt to repair it yourself. Refer servicing to qualified personnel. This product
does not contain any user serviceable parts. Unauthorised handling of the
device may damage it and will void your warranty.

Moisture and water

• Do not leave it in low temperatures as moisture can form inside the product, which
may damage the circuit board.

• To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. Do not place objects filled with water, such as a vase, on the product.

Heat sources and flames

• Do not leave it in high temperatures as electronic devices and plastic parts may warp
in heat.

• No naked flame sources, such as lit candles, should be placed on the product.

8

Safety information

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Safety information

Important - Please read these instructions fully before
installing or operating

Ventilation

• Do not block or cover slots, holes or openings on the product by placing on soft
furnishings such as carpets, rugs or beds as these are provided for functionality and/or
ventilation to ensure safe operation of the product.

• The underneath and sides of this product may become warm after a long period of
use. This is normal.

Positioning the Bluetooth Micro System

It is important that you consider carefully in advance where your Micro System and
speakers will be situated and make sure that they are:

• on a flat and stable surface.

• within 1.4 metres of a power socket. Please ensure that the mains power lead and
speaker cables are not a trip hazard.

• at least 1 metre away from other electrical appliances to avoid interference.

• where it will be in range of the connected or ‘paired’ bluetooth device (e.g. iPod/
iPhone/iPad/Android/other phone/computer, which is about 10 metres or less (33 feet
or less) in line of sight.

• where there is enough height for the Micro System wire radio aerial.

• Never place your Micro System directly onto antique or polished surfaces.

CAUTION

To avoid possible hearing damage, do not listen to this Micro System at
high volume levels for long periods of time. Always keep the volume within
reasonable limits.

9

Safety information

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Safety information

Important - Please read these instructions fully before
installing or operating

Power source

• Only use the power supply that came with the product. Using an unauthorised power
supply will invalidate your guarantee and may irrecoverably damage the product.

• Disconnect your Micro from the mains power supply during thunderstorms.

• Always check that you have completely switched off your Micro System, before you
change or disconnect the power supply.

• Where the mains power plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.

• If the Micro System will not be used for a long period of time, remove the CD and
make sure that the mains power is unplugged and the battery is removed from the
remote control.

• Only use recommended batteries or those of the same or equivalent type in the
remote control.

• Batteries are to be inserted with the correct polarity.

• The supply terminals are not to be short-circuited.

• Never throw batteries in a fire or attempt to open the outer casing. Do not expose
them to excessive heat, such as sunshine.

• Batteries are harmful if swallowed, so keep away from young children.

CAUTION

Danger of explosion if batteries are incorrectly replaced. Replace only with the
same or equivalent type.

10

Safety information

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Safety information

Important - Please read these instructions fully before
installing or operating

WARNING

Do not ingest the battery, Chemical Burn Hazard.

The remote control supplied with this product contains a button cell battery. If
the button cell battery is swallowed, it can cause severe internal burns in just 2
hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and
keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.

11

This page is left intentionally blank

Getting to know your Bluetooth

Micro System

2

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Ready? Let’s begin...

Please read these instructions carefully. They contain important information which will
help you get the best from your product and ensure safe and correct installation and
operation.

If you require any further assistance, our technical experts are happy to help. For full
details, refer to the product support section at the end of these instructions.

14

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

2 3 4

1 6

7

8 9 10

Fig 1.

5

11

12

13

14 15

Fig 2.

1. Power on/off (standby)

2. CD Compartment

3. Backlit display

4. Rotary volume control (push to Select)

5. Play/Pause

6. Stop

7. Headphone socket

9. Prog.

10. Skip back/Tune -

11. Skip forward/Tune +

12. Line in

13. Left and Right speaker sockets

14. Mains power cable

15. Wire radio aerial

8. Mode

15

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

1

2

3

4 13

5

6

7

8

9

1. Power on/off (standby)

2. Skip back

3. Play/Pause

4. Clock

5. Scan

6. Program

7. Memory -

8. Pair

9. Mute

10

11

12

14

15

16

17
18

Fig 3.

10. Equalizer

11. Mode

12. Skip forward

13. Stop

14. Sleep

15. Repeat

16. Volume +

17. Memory +

18. Volume -

Note: The remote signal may not be received if there is an obstacle between the

remote and the Micro. Direct sunlight or other bright light sources shining on the
remote sensor next to the Micro display, may affect the performance of the remote
control.

16

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Power connection

1. Connect the speakers to the Left and Right speaker sockets on the back of the Micro.

Please note that the speakers are shaped and so you will need to view them from the
front before you connect them to the speaker sockets.

2. Fully extend the wire radio aerial on the back of the Micro to receive the best possible

radio reception and sound quality.

3. Open the CD compartment (push and release the lid on the front right), and remove

the cardboard shipping protector. Close the CD lid.

4. Plug the mains power plug into the mains power wall socket and switch on. Your

Micro will now be in ‘Standby’ mode.

5. Pull out the safety strip on the remote control to activate the battery.

Initial set-up

Press and release the Power button on the front of your Micro System. The first time you
switch on your Micro it will start in CD mode, subsequently it will start in the mode you
were last using unless it has been unplugged from the mains power supply.

Change the mode

Press and release the Mode button to change between CD, FM Radio, Bluetooth and Aux
in modes. Please check the display, which will confirm the mode.

Adjusting the volume

Turn the rotary volume control clockwise to increase the volume and anti-clockwise to
decrease the volume.

Check the display, which will confirm the volume setting. The maximum volume is level

30.

17

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Mute

Press and release the Mute button on the remote control to mute the sound. ‘00’ will
flash in the display.

Press and release the Mute button again to turn this feature off and unmute the sound.

Equalizer or EQ setting

You can change the sound of your Micro using the EQ setting, there are 4 options
available (Classic, Rock, Pop and Jazz).

Press and release the EQ button on the remote control to change the EQ setting.

Set the clock

In standby mode:

Press and hold the Clock button on the remote control, then use the and
buttons to scroll and the clock button to confirm, to select 12H/24H and set the clock
time. Once set, the clock time is displayed in standby mode.

Sleep timer

You can set your Micro to turn off automatically using the sleep timer. You can choose
from 10, 20, 30, 40, 50, 60, 70, 80, 90 minutes or OFF.

Continuously press and release the Sleep button on the remote control to cycle through
the available options, stop when the sleep time you would like is displayed.

Note: To cancel the sleep time, follow the steps to set the sleep time but stop when
‘OFF’ is displayed.

18

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Using headphones

You can connect headphones with a 3.5mm plug (not included) to the socket on the front
of the Micro. When you have headphones connected the Micro speakers are switched off
and all sound is via the headphones.

Note: Always keep the volume within reasonable limits.

Connect to a Bluetooth device

Check that your Micro is in Bluetooth (BT) mode. If you are not already in BT mode,
repeatedly press and release the Mode button on the front of the Micro or on the remote
control until you are in BT mode (check the display). will flash in the display, whilst your
product searches for Bluetooth devices.

In Bluetooth (BT) Mode:

1. will flash in the display, whilst your product searches for Bluetooth devices.

2. On the device that you would like to connect to your Micro via Bluetooth (e.g. iPhone/

iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is ‘discoverable’.

Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.

3. Select to ‘Add new device’, if necessary.

Note: Some products will automatically search for a new device and so the ‘Add new

device’ option is not available.

4. When found, your Micro will be displayed as ‘BUSH FM MICRO’. Select the device

name to begin pairing.

5. When pairing is complete will stop flashing in the display, and will be constantly

displayed.

19

Getting to know your Bluetooth Micro System

You’ll be up and running in no time

Getting to know your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

6. Now that you have paired your device with the Micro, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.

7. Your device will remain paired with the Micro unless you decide to disconnect or
‘unpair’ it.

20

This page is left intentionally blank

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

This page is left intentionally blank

Using your Bluetooth

Micro System

3

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

CD Mode

Note: Please make sure that you remove the cardboard shipping protector from within
the CD compartment before you try to use CD player.

Check that your Micro is in CD mode. If you are not already in CD mode, repeatedly press
and release the Mode button on the front of the Micro or on the remote control, until you
are in CD mode (check the display). The display will show ‘Cd’, followed by ‘LOAd’. If the
CD compartment is empty ‘N0’ will then be displayed.

Play a CD

Note: It is not possible to play DVD or computer CDs.

1. Press and release the lid of the CD player on the front right edge, where ‘Push to

Open’ is printed. ‘OPEN’ will be displayed.

2. Place an audio CD, label side up, into the CD compartment. Please ensure that you
line up the hole in the centre of the CD, with the central spindle and press down into
place.

3. Close the lid of the CD player, pressing down on the front right edge, ensuring that it
‘clicks’ shut. ‘LOAd’ will be displayed and after a short delay the first track will begin to
play; the elapsed time of the track will be displayed.

CD controls

You can use the following controls on your Micro in CD mode.

• Play

Press and release the button on the Micro or on the remote control. The first
track will begin to play and the track number and the elapsed time of the track will be
displayed.

24

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

• Pause

Press and release the button on the Micro or on the remote control. The elapsed
time of the track will flash in pause mode. Press and release the button again to
continue to play the track/CD.

• Next track:

Press and release the button on the Micro or on the remote control.

• Previous track:

Press and release the button on the Micro or on the remote control.

• Fast forward within a track:

Press and hold the button on the Micro or on the remote control.

• Fast backward within a track:

Press and hold the button on the Micro or on the remote control.

• Stop

Press and release the button on the Micro or on the remote control.

Programmed play mode

In programmed play mode, you can program the play order of the tracks on your CD.
You can program up to 20 tracks in total.

Note: To set up programmed play mode, the CD must be stopped in the CD
compartment and must not be paused or playing.

In CD mode, with the CD you wish to programme in the CD compartment and stopped:

1. Press and release the Prog. button on the Micro or on the remote control to enter CD

programmed play mode. ‘0100’ will be displayed.

2. Use the or buttons on the Micro or on the remote control to go to the track

number that you would like to program to play first. Press and release the Prog. button
on the Micro or the Prog. button on the remote control to confirm.

25

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

3. ‘0200’ will now be displayed and you can select the second track that you would like
to programme. Continue to select each track as in Step 2 above, up to a total of 20
tracks.

Note: After you have selected track 20 in the programmed play list ‘FULL’ will be
displayed.

4. Press and release the Prog. button on the Micro or the Prog. button on the remote
control again to confirm the last track in the programmed play mode list.

5. Press and release the button on the Micro or on the remote control to play the
programmed tracks.

6. To exit programmed play mode, press and release the button twice on the Micro or
on the remote control.

Repeat and Random modes

1. Press and release the Repeat button on the remote control. A icon is
displayed. Continuously press and release the Repeat button to cycle through the
available options of :

• Repeat (current track)

• Repeat all (all the tracks on the CD)

• Random (random play order)

Press and release the Repeat button one more time to turn off Repeat and Random
modes.

Remove the CD

Press and release the lid of the CD player on the front right edge, where Push to Open is
printed. ‘OPEN’ will be displayed.

Put your thumb on the central spindle and put your fingers under the outside edge of the
CD and lift off and remove the CD from the compartment.

Close the lid of the CD player, pressing down on the front right edge, ensuring that it
‘clicks’ shut. ‘LOAd’., followed by ‘N0’ will be displayed.

26

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Note: If you stop or pause playing a CD for approximately 30 minutes, your Micro will
go to Standby mode automatically.

Caring for compact discs

• Do NOT touch the playback side of the CD.

• Do NOT attach paper or tape or any other material to the disc.

• Fingerprints and dust on the disc will cause sound deterioration. Wipe the disc from
the centre outwards with a soft cloth. Always keep the disc clean.

• If dust or marks cannot be removed with a soft cloth, wipe the disc lightly with a
slightly damp soft cloth and then wipe with a soft dry cloth.

• Do NOT use any type of solvent, commercially available cleaners or antistatic spray for
vinyl as it may damage the disc.

• Do NOT store discs in a place subject to direct sunlight or near a heat source.

• Do NOT store discs in a place subject to moisture or dust, such as a bathroom or near
a humidifier.

• Always store discs vertically in a case, stacking or placing objects on discs may cause
warping.

FM Radio mode

If you are not already in FM mode, repeatedly press and release the Mode button on the
front of the Micro or on the remote control to go to FM mode (check the display). If you
were listening to an FM station when you switched the Micro off then this station will be
automatically selected when you switch the Micro back on.

Wire radio aerial

Please make sure that the wire aerial on the back of the Micro is fully extended and
adjusted before you attempt to tune to an FM radio station (a vertical position is
recommended). This will ensure that the maximum signal strength is available when the
Micro begins to scan. Extending the aerial also ensures the best possible sound quality.

27

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Tuning to an FM station

In FM mode:

Press and hold the Tune+ on the front of the Micro or the button on the remote
control to scan up the frequency band, your Micro will search for the next available station
and then stop on that station.

Press and release the Tune+ on the front of the Micro or the button on the remote
control to scan up the frequency band in 0.05MHz steps

Press and hold the Tune- button on the front of the Micro or the on the remote
control to scan down the frequency band, your Micro will search for the next available
station and then stop on that station.

Press and release the Tune- button on the front of the Micro or the button on the
remote control to scan down the frequency band in 0.05MHz steps.

Note: If reception is poor check that the wire aerial is fully extended or try moving the
Micro to another location.

Storing an FM station preset

Your Micro can store up to 20 FM stations in its preset memories for instant access to your
favourite stations.

1. Tune the Micro to the FM radio station that you wish to preset.

2. Press and hold the Prog. button on the front of the Micro or on the remote control

until ‘P XX’ starts flashing on the display (where XX is the preset number).

3. Use the and buttons on the Micro or on the remote control to move to the

preset number that you would like to store the radio station to (1-20).

4. Press and release the Prog. button on the Micro or the ‘Prog’ button on the remote

control, ‘P XX’ will stop flashing confirming that the preset has been stored.

Your Micro can automatically search for and store FM radio stations.

1. Press and release the button on the Micro or the Scan button on the remote

control.

28

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Your Micro will now scan for, and store, all of the available FM stations.

Note: If there is already an existing FM station stored under a preset, it will be
overwritten when you store new stations.

Tune to an FM station preset

In FM mode:

Press and release the Mem+ or Mem- buttons on the remote control to move to the
preset location and station that you would like to listen to (1-20). When you pause
between each press the frequency stored under each preset location will be displayed
and the Micro will tune to and play the stored station.

Bluetooth mode

Check that your Micro is in Bluetooth (BT) mode. If you are not already in BT mode,
repeatedly press and release the Mode button on the front of the Micro or on the remote
control until you are in BT mode (check the display). will flash in the display, whilst your
product searches for Bluetooth devices.

In Bluetooth (BT) Mode:

1. will flash in the display whilst your product searches for Bluetooth devices.

2. On the device that you would like to connect to your Micro via Bluetooth (e.g. iPhone/

iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is ‘discoverable’.

Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.

3. Select to ‘Add new device’, if necessary.

Note: Some products will automatically search for a new device and so the ‘Add new

device’ option is not available.

4. When found, your Micro will be displayed as ‘BUSH FM MICRO’. Select the device
name to begin pairing.

29

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

5. When pairing is complete will stop flashing in the display, and will be constantly

displayed.

6. Now that you have paired your device with the Micro, it will connect to it when it is

within range, which is about 10 metres or less (33 feet or less), line of sight.

7. Your device will remain paired with the Micro unless you decide to disconnect or

‘unpair’ it.

Note: If your device should be come unpaired for any reason, follow the steps above
to ‘pair’ it again. You can press and release the Pair button on the remote control to
restart the Bluetooth pairing process

Listening to Music/Audio using Bluetooth

In Bluetooth (BT) Mode:

1. Select and start the music or audio that you wish to listen to on your paired Bluetooth

device, it will now be heard through the Micro speakers. Adjust the volume on the
connected device and/or your Micro.

Note: If your previously paired device is within range but does not automatically
connect, go to the Bluetooth connectivity settings on your device and select ‘BUSH FM
MICRO’ to reconnect. Alternatively, press and release the ‘Pair’ button on the remote
control to restart the Bluetooth pairing process.

2. You can use the controls on your paired Bluetooth device as well as those on the front

of the Micro or on the remote control when listening to music via Bluetooth.

Controls available on your Micro and the remote control are:

• Play/Pause

Press and release to play/pause.

• Skip back

Press and release to skip back to the previous track.

30

Using your Bluetooth Micro System

Let’s get started

Using your Bluetooth Micro System

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Note: If you press and hold the button on the Micro or the Pair button on the
remote control for 3 seconds, you can pair and unpair the connected bluetooth device.

• Skip forward

Skip forward. Press and release to skip forward to the next track.

Delete all paired Bluetooth device records

Press and hold the button on the Micro or on the remote control to delete all the
Bluetooth device records from your Micro. will flash in the display. See page 28 to
connect or ‘pair’ a new device with your Micro.

Note: If you do not use or pause your Micro for approximately 30 minutes and no
audio signal is received, it will automatically go to Standby mode.

Aux in mode

Check that your Micro is in Aux in mode. If you are not already in Aux in mode, repeatedly
press and release the Mode button on the front of the Micro or on the remote control,
until you are in Aux in mode (check the display).

Using a 3.5mm audio input connection cable (not included), Aux in allows for a quick and
easy connection to an external sound source.

1. Connect one end of the 3.5mm audio connection cable to the headphone (or
auxiliary out) socket of your secondary device, connect the other end to the Line in
socket on the back of your Micro.

2. Press the Play button on your external device to start playback through the Micro
speakers.

To gain optimal volume levels, adjust the output volume level on both the secondary
device and on the Micro.

Note: It is recommended that you unplug the Audio cable from the Line in socket after
you have finished listening to your external device.

31

This page is left intentionally blank

Other information

4

Other information

Helpful technical information

Other information

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Technical specification

Power: Input AC 230-240V/50Hz

Battery: 1 x 3V CR2025 for the remote control

Output: 2 x 3W RMS

Frequency range: FM: 87.5 MHz to 108 MHz

Bluetooth: Version 2.1

Profiles A2DPV1.2, AVRCPV1.4

Frequency range: 2.4GHz-2.480GHz

Pairing name: BUSH FM Micro

This product is a Class II or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical
earth.

34

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

This page is left intentionally blank

This page is left intentionally blank

Product support

5

Product support

Help is always at hand

Product support

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Troubleshooting

If you are experiencing problems with your Micro, there are some quick and easy checks
that you can do, which may help to solve the problem.

CD Does not play:

• Check that you are in CD mode. Press and release the Mode button on the Micro or
on the remote control to change the mode (check the display).

• Take out the CD and check that it is not marked or scratched. Damaged CDs cannot
be played in the Micro or may skip or not rotate correctly.

• Please check that you are using an original audio CD and not a copy. Often copied
CDs will not play.

No sound / power:

• Adjust the volume using the rotary control on the Micro or the Vol + and Vol - buttons
on the remote control.

• Check that the speakers are plugged fully home into the sockets on the back of the
Micro.

• Check that the mains power wall socket is switched on and that the Micro is not in
Standby mode.

• You may have headphones connected. Either use the headphones to listen to your
Micro or unplug the headphones.

• Check that you are trying to use the function buttons for the mode that you are in.

• If you are using a Bluetooth connected device or an external sound source via Line in.
Increase the volume on the secondary device and on the Micro.

Radio reception is poor:

• Fully extend the wire aerial to get the best reception and sound quality.

• Retune the radio station/s.

• Try moving your Micro to another location to see if reception improves.

• Check that you do not have other electrical equipment too close to your Micro,
causing interference.

38

Product support

Help is always at hand

Product support

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Unable to pair with a Bluetooth device:

• Check that you are In Bluetooth (BT) Mode.

• Ensure that you are within range of the radio for Bluetooth functionality, 10 metres or
less (33 feet or less).

• Move the Micro and Bluetooth device away from other Bluetooth devices/electrical
equipment.

• If possible, turn off other nearby Bluetooth devices or disable their Bluetooth
functionality.

The function buttons do not respond:

• Check that mains power wall socket is switched on and that the Micro is not in
Standby mode.

• Check that you are trying to use the function buttons for the mode that you are in.

39

Product support

Help is always at hand

Product support

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

Help and assistance

If you require any technical guidance or find that your Bluetooth Micro System is not
operating as intended, a simple solution can often be found in the Troubleshooting
section of these instructions or online at www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0345 600 3021*. To help
give us give you a fast and efficient service please have the following information ready:

You can find these
on the rating plate - a

Model Ref.

Serial number

small information
panel (usually a sticker
or metal plate) on the
rear or base of your
product.

Date of purchase

Local call rates applies*

This will be shown on
your receipt

Lines open 8am-7pm Monday to Saturday and
10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on
your call plan/tari. Mobile and other providers costs may vary, see www.bt.com/pricing for details.

For security and training purposes, telephone calls to and from customer service centres may be
recorded and monitored. Calls from Republic of Ireland will attract international call charges.

40

Product support

Help is always at hand

Product support

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

Disposal

• Disposal of your old product. Your product is designed and manufactured with
high quality materials and components, which can be recycled and reused.

• When this crossed out wheeled bin symbol is attached to a product it means
the product is covered by the European Directive 2012/19/EC..

• Please make yourself aware of the local collection system for electrical and
electronic products.

• Please act according to your local rules and do not dispose of your old
products with your normal household waste.

• The correct disposal of your old product will help prevent potential negative
consequences for the environment and human health.

This product is intended for use within the UK. This equipment complies with the essential
requirements of the Radio Equipment Directive 2014/53/EU.

Declaration of Conformance

Hereby, Argos Ltd, declares that this Bluetooth Micro System is in compliance with the
essential requirements and other relevant provisions of the Radio Equipment Directive
2014/53/EU. The complete declaration of conformity can be obtained by contacting
http://www.argos-support.co.uk/

41

Your Bush Guarantee

This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.

Call us now and activate your 12 month guarantee

Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months.
Don’t forget to register it with us today so we can provide you with our best possible after-sales service and
useful updates.

www.bushregistration.co.uk

FREEPHONE*

0800 597 8548

Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.

Guarantor: Argos Limited - 489 - 499 Avebury Blvd. - Milton Keynes - MK9 2NW

Product support

Help is always at hand

Product support

If you require any tec hnical guidance or find that you r product is not operating as inten ded, a simple solution can oft en be found in the

Tro ub le s ho ot in g

• The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.

• The product must be correctly installed and

operated in accordance with the instructions
contained in the manual.

• It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is

If you provide us with information about another
person, you confirm that they have appointed you
to act for them, to consent to the processing of their
personal data including sensitive personal data and
that you have informed them of our identity and the
purposes (as set out in the Important Data Privacy
notice displayed overleaf) for which their personal data
will be processed.

You are entitled to ask for a copy of the information
we hold about you (for which we may charge a small
fee) and to have any inaccuracies in your information

The guarantee is subject to the following provisions:

re-sold or has been damaged by inexpert repair.

• Specifications are subject to change without
notice.

• Bush disclaim any liability for loss or damage
arising from the breakdown of the product.

• This guarantee is in addition to and does not
diminish your statutory or legal rights.

Important Data Protection Information

corrected.

For quality control and training purposes, we may
monitor or record your communications with us.

If your personal details change, if you change your
mind about any of your marketing preferences or if you
have any queries about how we use your information,
please let us know by contacting our Data Protection
Officer, Domestic & General, Leicester House
17 Leicester Street, Bedworth, Warwickshire
CV12 8JP.

42

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our e xperts on 0345 600 3021.

This page is left intentionally blank

Contact:

www.argos-support.co.uk

Helpline: 0345 600 3021.