Bunn SLCA-7 Parts Manual

RELEASED FOR PRODUCTION

SLCA-7

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: [phone] FAX: [phone]

48150.0000B 12/14 ©2013 Bunn-O-Matic Corporation

DIR Num: 48150.0000 19, May 2015

RELEASED FOR PRODUCTION

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, ther­mal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and
labor for 4 years or 40,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of any claim to be made under this warranty by telephone at [phone] or by writing to Post Office Box
3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized
BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX­PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op­tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, Brew­WISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with
the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design,
Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet
Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment
Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com,
Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in
Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage
Bar Creator, Beverage Profit Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic
Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture
Prompted Cleaning, Pouring Profits, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either
trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing configura­tion is a trademark of Bunn-O-Matic Corporation.

2

48150 031314

DIR Num: 48150.0000 19, May 2015

RELEASED FOR PRODUCTION

TABLE OF CONTENTS

Covers, Panels & Drip Tray .................................................................................................................................4

Door Assembly ...................................................................................................................................................8

Pump & Tubing .................................................................................................................................................10

Cooling Fan & Air Duct ......................................................................................................................................12

Pump Assembly

Water Inlet & Tank Drain

Tank Assembly ..................................................................................................................................................18

Dispense Valve and Lines..................................................................................................................................20

Auger Drive & Hopper Assy ..............................................................................................................................22

Mixing/Whipper Chamber & Drive Motor

Electrical Components ......................................................................................................................................28

Numerical Index

................................................................................................................................................14

...................................................................................................................................16

..........................................................................................................24

................................................................................................................................................30

3

DIR Num: 48150.0000 19, May 2015

48150 040113

RELEASED FOR PRODUCTION

20

16

18

17

COVERS, PANELS AND DRIP TRAY

20 22 25 26

14

15

SLCA-7

21

6

11

19

12

22

22 24 23

13 9

2

10

7

5

8

1

29

3

4

27

28

4

DIR Num: 48150.0000 19, May 2015

P4325.35

48150 040113

RELEASED FOR PRODUCTION

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

1 38664.1003 1 Base w/Decals (Includes item 2)

2 00824.0002 1 Decal, Grounding Location

3 26528.0000 4 Leg, 4.0" Adjustable

01526.0001 4 Washer

4 03996.0000 4 Pad, Anti Skid

5 38080.0001 1 Panel, Inner Right

01311.0001 5 Screw, Truss Head Locking #8-32 x .25"

6 36896.0000 4 Pad

7 38082.0000* 1 Panel, Inner Left

01311.0001 5 Screw, Truss Head Locking #8-32 x .25"

8 36647.0001 1 Bracket, Hinge, Lower Right

01311.0001 3 Screw, Truss Head Locking #8-32 x .25"

9 34666.0000 1 Catch, Door latch

02336.0000 2 Screw, Truss Head #4-40 x .38"

01509.0001 2 Lockwasher, Internal-tooth #4

10 39284.0000 1 Plate, Retainer

11 45389.0000 1 Panel, Center

01311.0001 4 Screw, Truss Head Locking #8-32 x .25"

12 38084.0003 1 Platform, Hopper Mounting

01311.0000 4 Screw, Truss Head #8-32 x .25"

13 20960.0000 2 Shoulder Screw

00991.0002 2 Nut, Lock #6-32

14 38077.1006 1 Panel w/Decals, Inner Rear (Includes item 15)

15 39583.0000 1 Decal, Hopper Placement

16 38990.1001 1 Panel w/Decals, Rear (Includes items 17 & 18)

01311.0003 11 Screw, Truss Head BLK #8-32 x .25"

17 00986.0000 1 Decal, Warning Electrical

18 00656.0001 1 Decal, Comply to Plumbing

19 26008.0001 2 Mount, Card Snap-In

20 35926.0000 4 Bracket, Side Support

01311.0001 8 Screw, Truss Head Locking #8-32 x .25"

21 35912.1001 1 Panel w/Decals, Right Side (Includes item 22)

01311.0003 3 Screw, Truss Head BLK #8-32 x .25"

22 37881.0000 3 Decal, No Serviceable Parts

23 35912.1004 1 Panel w/Decals, Left Side (Includes items 22 & 24)

01311.0003 3 Screw, Truss Head BLK #8-32 x .25"

24 39318.0008 1 Schematic, Electrical

25 35916.1002 1 Panel w/Decals, Top Rear (Includes item 22)

01311.0003 2 Screw, Truss Head BLK #8-32 x .25"

(Continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

5

DIR Num: 48150.0000 19, May 2015

48150 040113

RELEASED FOR PRODUCTION

20

16

18

17

COVERS, PANELS AND DRIP TRAY

(Continued)

20 22 25 26

14

15

SLCA-7

21

6

11

19

12

22

22 24 23

13 9

2

10

7

5

8

1

29

3

4

27

28

6

DIR Num: 48150.0000 19, May 2015

P4325.35

48150 040113

RELEASED FOR PRODUCTION

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

26 35915.1002 1 Panel, Top Front

01382.0002 2 Screw, Truss Head BLK #6-32 x .38"

01311.0003 3 Screw, Truss Head BLK #8-32 x .25"

27 37065.0001 1 Bracket, Drip Tray

28 36670.0000 1 Drip Tray Assy

29 39308.0000 1 Cover, Drip Tray

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

7

DIR Num: 48150.0000 19, May 2015

48150 040113

RELEASED FOR PRODUCTION

10

14

20 19 18

DOOR ASSEMBLY

11

12

13

15

SLCA-7

1

2

6 7 9 8

12

16

17

3

4

LARGE

HOT CHOCOLATE

STOP

BLACK COFFEE

MOCHA
CAPPUCCINO

MOCHA LATTE

ESPRESSO

CAPPUCCINO

LATTE

SMALL

DECAF

5

8

DIR Num: 48150.0000 19, May 2015

P4326.40

48150 040113

RELEASED FOR PRODUCTION

DOOR ASSEMBLY

ITEM PART NO. QTY. DESCRIPTION

- 39041.1004 1 Door Assembly (Includes items 1 - 20)

1 38933.0000 1 Door

2 39167.0003 1 Decal, Door

3 39258.0007 1 Membrane Switch

4 34472.1001 1 Lock Assy (Includes Keys)

28095.0000 1 Keys (Set of 2)

5 35052.1002 1 Tube, Silicone

6 39030.0000 1 Splash Panel

38838.0001 4 Screw, Pan Head #6 Type 25 x .625"

7 39479.0000 1 Decal, Cleaning

8 11646.0002 1 Decal, Warning - Hot Liquids

9 39474.0000 1 Decal, Cup Placement

10 39040.1000 1 Panel, Inner Access (Includes item 21)

38838.0001 4 Screw, Pan Head #6 Type 25 x .625"

11 39034.0000 1 Bracket, Upper Door

38838.0001 4 Screw, Pan Head #6 Type 25 x .625"

12 34362.0000 2 Bushing

13 01403.0000 1 E-ring

14 36647.0001 1 Bracket, Hinge

01311.0001 3 Screw, Truss Head Locking #8-32 x .25"

15 39033.0000 1 Bracket, Lower Door

38838.0001 4 Screw, Pan Head #6 Type 25 x .625"

16 24457.0002 1 Screw, Shoulder

17 35260.0000 1 Cable Mount (Door Cable)

18 39036.0000 1 Bracket, Latch

38838.0001 2 Screw, Pan Head #6 Type 25 x .625"

01347.0000 2 Screw, Truss Head #6-32 x .38"

24224.0000 2 Nut, Acorn #6-32

19 39038.0000 1 Plate, Latch

01347.0000 2 Screw, Truss Head #6-32 x .38"

20 34667.0000 1 Keeper, Door Latch

01311.0005 2 Screw, Truss Head BLK #8-32 x .38"

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

9

DIR Num: 48150.0000 19, May 2015

48150 120114

RELEASED FOR PRODUCTION

PUMP & TUBING

A

SLCA-7

6

4

5

4

3

2

1

NOTE: Letters appearing within this illustration correspond to matching connections in other illustrations.

10

DIR Num: 48150.0000 19, May 2015

P4327.75

48150 040113