Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects
in material and workmanship existing at the time of manufacture and appearing within one year from the date of
installation. In addition:
1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and
workmanship for three years from the date of installation.
2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material
and workmanship for two years from the date of installation.
3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory
screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.
This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that,
in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper
maintenance or repair, damage or casualty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR
ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are
not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn.
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not
be relied upon.
The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer
shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole
discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge
for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during
the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the
equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS
SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.
In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
10838 090601
TABLE OF CONTENTS
Base, Front Panel, Drip Tray and Bottom Cover ........................................................................................... 6
Electrical and Operating Controls............................................................................................................... 24
Pressure Guage and Piping ....................................................................................................................... 16
Pump, Flow Meter, Solenoid and Piping .................................................................................................... 10
Steam, Hot Water Valves and Piping ......................................................................................................... 18
Tank and Components ................................................................................................................................. 8
Top Cover and Rear Panels .......................................................................................................................... 4
3
10838 091701
BUNN
®
1
TOP COVER AND REAR PANELS
ES • 2C
2
3
4
5
6
P1077
4
10838 061594
TOP COVER AND REAR PANELS
ITEMPART NO.QTY.DESCRIPTION
126477.00002Grate
226477.00011Grate
325168.00001Panel, Top
24006.04012Screw, Cheese Head M5 x 0.8 x 12mm
425169.00001Panel, Upper Rear
24047.01002Nut, Hex M6 x 1.0 Brass
525170.00001Panel, Lower Rear
625167.00002Cage Nut, M5 x 0.8
5
10838 091701
BUNN
®
13 14 15
BASE, FRONT PANEL, DRIP TRAY AND BOTTOM COVER
1 2 3 4
ES • 2C
5
17
12
10
11
16
OFF
N
O
6
7
8
9
P2471
6
10838 091701
BASE, FRONT PANEL, DRIP TRAY AND BOTTOM COVER
ITEMPART NO.QTY.DESCRIPTION
125172.00001Frame, Base
224246.00001Decal, Caution - Hot-Liquid-Steam
325166.00001Panel, Front
25171.00002Screw
425173.00001Grate, Drip Tray
525174.00001Drip Tray
627387.00001Cover
24006.00002Screw, Hex Head M5 x 0.8 x 10mm
24026.00002Washer, Flat M5
727373.00002Spacer
24026.00002Washer, Flat M5
24046.00002Nut, Elastic Stop M5 x 0.8
826476.00001Cover, Bottom
24006.00004Screw, Hex Head M5 x 0.8 x 10mm
24026.00004Washer, Flat M5
927374.00001Bushing, Snap
1000502.00004Leg, 4” Adjustable (See item 18)
1103996.00004Pad, Anti Skid 1.25” Dia (See item 18)
1226479.00001Plug
1300656.00001Decal, Comply to Plumbing Code
1424247.00001Decal, Notice - Operating Pressure
1500986.00021Decal, Electrical Warning
1622723.00001Decal, Run - Program
1722724.00001Decal, Power Switch
1813255.00021Kit, Leg (Includes four legs and four anti skid pads)
7
10838 121596
BUNN
®
1 2 3 4 9 10 11 12 13
TANK AND COMPONENTS
5
6
7
8
ES • 2C
14
18
9
15
16
17
P1079
8
10838 091701
TANK AND COMPONENTS
ITEMPART NO.QTY.DESCRIPTION
125188.00001Tank
223628.00002Gasket, Copper
325008.00002Valve, Pressure Relief (Also order item 2)