BT DECOR 1100 User Manual

BT Decor 1100

User Guide

Please note that you require 4 x AA batteries for
the 1571 feature to work. These are not included.

Welcome…

to your BT Decor 1100
Corded Telephone

Three one-touch memory buttons for easy dialling of your

•

most important numbers.

Quickdial memory to store 10 more useful contact numbers.

•

Secrecy feature lets you talk to someone else close by

•

without your caller hearing you.

Last number redial at the touch of a button.

•

The BT Answer (1571) button flashes to let you know when

•

you have received new voice mail messages on your
network’s answering service*

This User Guide provides you with all the information you
need to get the most from your phone. Before you make
your first call you will need to set up your phone. Follow
the simple instructions in ‘Getting Started’, on the next
few pages. If you need any assistance with your phone,
please visit

www.bt.com/producthelp

Hearing aid?

The BT Decor 1100 is fitted with an inductive coupler so it
is compatible with hearing aids.

Got everything?

BT Decor 1100 telephone

Base plinth

Telephone line cord

Wall mounting screws

User Guide

* Requires subscription to BT’s Call Minder or 1571 Service and 4 x AA batteries

must be fitted (not included) for this feature to work.

2

Mode

P
TE
TB

Ringer

R1
R2
R3

Ringer Vol.

Hi
Lo
Off

Getting started

Location

You need to place your BT Decor 1100 within 3 metres of a
telephone socket so that the cable will reach.

Your BT Decor 1100 can be wall mounted, see Wall mounting
your phone, on page 11.

Insert 4 x AA batteries

You will need to insert 4 x AA Alkaline recommended

1.5V batteries (not supplied) for the 1571 feature to work.

Please note

•

You will still be able to make and receive calls without the batteries fitted.

Low battery indication

•

If the batteries are low, the 1571 button will flash to warn you that they need
replacing.

Turn the phone over, and remove the battery compartment
cover by pressing in on the plastic clip and lifting the cover off.
Insert the batteries making sure to follow the polarity markings
shown inside the battery compartment and replace the cover.

Warning

•

When you change the batteries please ensure the phone is disconnected from
the telephone line.

If you need any assistance with your product, please visit www.bt.com/producthelp

3 Getting started

Connecting the handset to the base

Turn the phone over and connect the curly handset cord into
the socket marked with the symbol. Turn the phone back
over and position the handset on the receiver.

Removing the base plinth (optional)

Your BT Decor 1100 will come with the base plinth already
attached. If you want to use your BT Decor 1100 on a flat
surface such as a table or desk then we advise you to leave the
plinth attached.

If you prefer to wall-mount your BT Decor 1100, please refer to the instructions
shown on page 11.

If you want to remove the base plinth, turn the plinth lock
switch on the underside of the phone to the ‘unlock’ position
and unclip.

Connecting to the telephone line

Connect the telephone line cord to the socket marked on
the back of the base and plug the other end into the telephone
wall socket.

Your BT Decor 1100 is now ready for use.

Removing the batteries

If you ever need to remove the batteries, firstly ensure that the
phone is disconnected from the phone line and then turn the
phone over and remove the battery compartment cover by
pressing in on the plastic clip and lifting the cover off. Insert
your fingernail under the end of the batteries to pull them out.

If you need any assistance with your product, please visit www.bt.com/producthelp

M1
M2
M3
M4
M5
M6
M7
M8
M9
M0

1

BT

4

Mode

P
TE
TB

Ringer

R1
R2
R3

Ringer Vol.

Hi
Lo
Off

Getting to know your phone

Corded telephone

R

otates to hold the handset

in place when wall mounted.

Store button (under One-

Underneath your phone:

Handset hook

Touch Memory Card)

Use to store one-touch

memory and quickdial

Redials the last number

numbers.

Redial button

called.

Mode switch

Use to change
the dial mode.

* To use the 1571 feature, you must subscribe to your network’s answering service. Batteries must be installed to be able to use the 1571 button.

If you need any assistance with your product, please visit www.bt.com/producthelp

Ringer Switch

Use to change
the ringer
melody.

Ringer Volume
Switch

Use to set the
ringer volume.