Page 1
RJ-2030/2050/2140/2150
English
Thank you for purchasing the Brother RuggedJet RJ-2030/2050/2140/2150
mobile printer.
Read the product's Quick Setup Guide and Product Safety Guide, before using
your printer. For detailed operation instructions, see the User's Guide (Brother
Solutions Center at support.brother.com/
). We suggest that you keep these
documents in a handy place for future reference.
You can download the latest drivers and applications for your printer, read
FAQs and troubleshooting tips, and learn about special printing solutions from
the Brother Solutions Center.
RD Rolls are genuine Brother roll media that have been tested and
certified for use with this product.
Quick Setup Guide
Printed in China
LBF854001
Package Contents
1
3
2
4
6
78910
11
12
14
13
5
To download and install printer drivers and software, visit our website.
Check that the package contains the following befor
Printer Rechargeable
Li-ion Battery
Quick Setup
Guide
Product Safety
Guide
General Description
e using your printer:
Belt Clip
Phillips Screws
(2 ea)
install.brother
For more information, see Driver and Software Installation.
Available Manuals
You can download the latest manuals from the Brother Solutions Center at
support.brother.com.
Product Safety
*1, *2
Guide
Quick Setup Guide
User’s Guide
AirPrint Guide
P-touch Template
*2
Manual
Raster Command
Referen
1
2
*2
ce
Printed manual in the box
PDF manual on the Brother Solutions Center website
*1, *2
*2
*2
This guide provides safety information; read it
thoroughly before using your printer.
This guide provides basic information about
using your printer along with detailed
troubleshooting tips.
This guide includes the contents of the Quick
Setup Guide, and additional information
about your printer settings, operations, safety
precautions, network connection settings,
troubleshooting tips, and maintenance
instructions.
This guide provides information for using
AirPrint to print from an iPad/iPhone/iPod
device.
This manual provides information on P-touch
Template.
This manual provides information about
printer control commands for controlling your
printer directly.
1LCD
2 Paper exit slot
3 Media roll compartment cover
4 Media roll cover open lever
5 Interface cover
6 Battery cover
7 Battery latch
8 DC connector
9Mini-USB port
10 Battery compartment
11
(Feed) button/OK button
(To feed the paper or print your
printer settings)
12
Menu button/▼ button
13
(Power) button/Back button
(To turn your printer on/off)
14 LED indicator
Page 2
Battery Installation/Removal
1
1
2
1
Recharging the Battery
Installing the Battery (PA-BT-003)
1. Move the battery cover lock to the unlock position, and then open the
battery cover.
2. Insert the battery into the battery compartment until the battery latch
locks into place. Make sure that the terminal end of the battery is facing
inwards and oriented correctly as shown. Do NOT use excessive force
to install the battery.
1 Battery latch
1. Make sure that the rechargeable Li-ion battery is installed in your
printer.
2. Use the compatible Brother AC adapter (PA-AD-600A) and AC power
cord to connect your printer to an AC power outlet (see Recharging the
Battery using the AC Adapter (Optional)), or use the Brother compatible
car adapter to connect your printer to a DC power outlet (see
Recharging the Battery using the Car Adapter (Optional)).
3. The LED indicator light is orange when the battery is charging.
When the rechargeable Li-ion battery is fully
turns off (when power is turned off) or lights in green (when power is
turned on). Disconnect the AC adapter or car adapter from the battery’s
DC connector.
For more information, see the U
Rec
harging the Battery using the AC Adapter (Optional)
ser’s Guide.
charged, the LED indicator
1. Make sure that the rechargeable Li-ion battery is installed in your
printer.
2. Open the interface cover and connect the AC adapter to your printer.
3. Connect the AC power cord to the AC adapter.
4. Connect the AC power cord to a nearby AC power outlet (100 -
240 VAC, 50 - 60 Hz).
3. Close the battery cover, and then move the battery cover lock to the lock
position.
Removing the Battery
1. Move the battery cover lock to the unlock position, and then open the
battery cover.
2. While pushing the battery latch, remove the battery.
1 AC adapter
2 AC power cord
harging the Battery using the Car Adapter (Optional)
Rec
Connect your printer to your vehicle’s 12
or similar) to charge the rechargeable battery.
V DC power outlet (cigarette lighter
1. Make sure that the rechargeable Li-ion battery is installed in your
printer.
2. Connect the car adapter to the vehicle’s 12 V DC power outlet.
3. Open the interface cover and connect the car adapter to your printer.
1 Car adapter
harging the Battery using the Battery Charger (Optional)
Rec
The optional battery charger can also be used for ch
of the printer. For more information, see the operation manual that is included
with the battery charger.
arging the battery outside
3. Close the battery cover, and then move the battery cover lock to the lock
position.
Page 3
Stopping Rechargeable Li-ion Battery Charging
1
IMPORTANT
1
1
1
2
2
3
To stop the battery charging, disconnect the AC adapter or car adapter from
the DC connector.
Notes on Using the Rechargeable Li-ion Battery
High density (dark) printing discharges the battery faster than low density
printing. You can adjust the print density setting in the Printer Setting Tool
(see the User's Guide).
he battery charging must take place between 41°F and 95°F (5°C and
T
35°C) environments, otherwise the battery will not be charged. If the
charging stops because the environment temperature is too low or too
high, place your printer in an environment with a temperature between
41°F and 95°F (5°C and 35°C) and try charging again.
If you use your p
adapter or car adapter is connected, charging may stop temporarily even
if the battery is not fully charged.
rinter when both the battery is installed and the AC
Rechargeable Li-ion Battery Characteristics
To ensure the highest performance and longest life from the battery:
o not use or store the battery in a location exposed to extreme high or low
D
temperatures as it may deteriorate more quickly.
emove the battery when storing your printer for long periods of time.
R
e batteries with less than a 50% charge in a cool dry place out of direct
Stor
sunlight.
echarge the battery every six months if it is stored for long periods of
R
time.
It is normal and safe for
Disconnect the charger and stop using the printer if it becomes hot to the
touch.
the printer to become warm while charging.
For RJ-2140/2150
1. Pull the cover open lever in the direction shown to open the media roll
compartment cover.
1 Cover open lever
2. Open the roll guides by lifting up the roll guide adjustment lever and
pulling the roll guide outwards.
Insert the media roll into the media roll compartment with the roll feeding
from the bo
ttom as shown.
Inserting the Paper or Label Roll
For RJ-2030/2050
1. Pull the cover open lever in the direction shown to open the media roll
compartment cover.
1 Cover open lever
2. Insert the media roll into the media roll compartment with the roll feeding
from the bottom as shown.
1
1 Roll guide adjustment lever
2 Roll guide
3 Print surface
(faces outwards on the roll)
3. While lifting up the roll guide adjustment lever, push in both roll guides
to the roll width. Insert the media roll so that it is positioned straight in
the media roll compartment.
4. Close the media roll compartment by pressing down on the center of the
cover until it locks into place.
Powering On or Off
On: Press and hold the (Power) button until the LCD turns on.
Off: Press and hold the (Power) button until the message [System Off]
appears on the LCD.
Do NOT remove the battery until the LCD turns off.
1 Print surface
(faces outwards on the roll)
3. Close the media roll compartment by pressing down on the center of the
cover until it locks into place.
Page 4
Setting the Language
NOTE
NOTE
NOTE
Connecting to a Host Device
1. Press the [Menu], [b] button to select the [Settings] menu, and then
press the [OK] button.
2. Select [ Language] , and then press the [OK] button.
3. Select a language, and then press the [OK] button.
LED Indicators
The indicator lights and flashes to indicate yo
used in this section explain the meaning of the different indicator colors and
patterns:
= Indicator is lit
= Indicator is flashing
(Off) = Indicator is off
Example: G = Indicator is flashing green
Indicator status Condition
(Off)
G
O
O
R
Power off
Charging complete (when power is turned off)
Battery level: one-third or more
Charging complete (when power is turned on)
Charging
Battery level: low
Rechargeable battery error
Battery level: empty
Wrong media error
Cover open error
System error
Mass storage error
Communication error
WPS connection error
Memory full error
Database search error
No template error
ur printer’s status. The symbols
G = Gree
O = Oran
R = Red
n
ge
Driver and Software Installation
To print from your Windows
Editor and other applications on your computer:
1. Visit install.brother and download the installer for the latest software and
manuals.
2. Double-click the downloaded .exe file and follow the on-screen
instructions to proceed with the installation.
®
computer, install the printer driver, P-touch
Your printer can be connected to your compu
cable or via a Bluetooth connection (RJ-2030/2050/2150 only) or
Wi-Fi connection (RJ-2050/2140/2150 only). For more information, see the
’s Guide.
User
ter or mobile device using a USB
Connecting Using USB
1. Make sure your printer is turned off before connecting the USB cable.
2. Connect the printer end of the USB cable to the mini-USB port on the
side of your printer.
3. Connect the other end of the USB cable to the USB port on the
computer.
Connecting Using Bluetooth (RJ-2030/2050/2150 only)
Use this procedure to pair your printer with the computer or mobile device
using the Bluetooth management software:
1. Press the [Menu] button to select the [Bluetooth] menu, and then press
the [OK] button.
Select [On].
2. Use your Bluetooth device management software to discover your
printer.
Follow the recommendations of the manufacturer of your
Bluetooth-equipped devices (computers and mobile d
Bluetooth adapter and install any necessary hardware and software.
• The Bluetooth connection settings are saved even after your printer is
turned of
• If your device cannot discover your printer using Blu
printer may be connected to another device. Use the connected
device to end the Bluetooth connection with your printer, or turn your
printer off and on again.
• If you close the cover of the device while transmitting data, the
communicatio
• If your printer becomes disconn
moved away from your printer, select "Bluetooth" in the device
settings, and then tap the device you want to connect to from the list
of Bluetooth devices.
f.
n may be interrupted.
ected because the mobile device is
evices) or
etooth, your
Connecting Using Wi-Fi® (RJ-2050/2140/2150 only)
1. Press the [Menu], [b] button to select the [WLAN] menu, and then press
the [OK] button.
Set [On/Off] to [On].
2. Use your computer or mobile device to select the SSID of your printer
("DIRECT-*****_RJ-XXXX"). If required, enter the password ("205*****"
for RJ-2050, "214*****" for RJ-2140, or "215*****" for RJ-2150). ***** is
the last five digits of the serial number.
For more information about connecting using Wi-Fi, see the User's
Guide.
Printing Receipts or Labels
To connect your printer to a computer using a wireless connection, we
recommend the following:
• Configure the wireless network settings
You can change the settings later using the Printer Setting Tool. For
more information, see the User's Guide.
• Install the software on a computer wir
network and configure your printer using a USB cable.
• Get the SSID (network name) and password (network key) of the
wireless netwo
• If your wireless access point/router supports WPS, yo
(Wi-Fi Protected Setup) to quickly configure the wireless network
settings.
rk in advance.
while installing the software.
elessly connected to your
u can use WPS
3. Close the dialog box when the installation is complete.
1. Install the printer driver and software downloaded from the Brother
website. (See Driver and Software Installation.)
2. Make sure that your printer is powered with a charged battery.
3. Turn your printer on.
4. Connect your printer to a computer or mobile device using either a USB
cable, Bluetooth, or Wi-Fi.
5. Insert the media roll.
6. Print receipts or labels.
For more information, see the User
’s Guide.
Page 5
Removing the Receipt/Label Roll
NOTE
1
12
IMPORTANT
Attaching the Belt Clip
For RJ-2030/2050
1. Pull the cover open lever in the direction shown to open the media roll
compartment cover.
2. Remove the roll.
It is not necessary to adjust the roll holder once it is correctly adjusted to
the media roll width.
For RJ-2140/2150
The printer can be carried on your belt by attaching
Follow the instructions below to attach the clip to the printer and your belt. You
can attach the included clip to your printer and secure it to your belt.
the included belt clip.
1. Secure the belt clip to the rear of your printer using the Phillips-head
screws as shown:
2
1
1Belt clip
2 Phillips screw
2. Attach the clip to your belt.
1. Pull the cover open lever in the direction shown to open the media roll
compartment cover.
2. While pushing the roll release lever, tilt the roll guide slightly, and then
remove the roll. The roll can be removed without changing the position
of the roll guide.
Do not forcefully tilt the roll guide too
break.
1 Roll release lever
far. Otherwise, the roll guide could
Turn the clip as shown to lock
the belt clip.
Make sure you attach the belt clip securely to your printer. There is a risk
of injury or damage if the belt clip is not attached securely and your
printer falls.
Turn the clip to the left or right to
unlock the belt clip.
Page 6
Troubleshooting
1 Media sensor
NOTE
This condition may occur more often when
your printer is used at high altitude (more
than about 10,000 feet) due to a lower air
density available to cool your printer.
Symptom Possible Solutions
Your printer cannot
connect to the
using Wi-Fi or Bluetooth.
Your printer cannot print
using Wi-
Your printer does not feed
per.
pa
Your printer feeds paper
continuously.
Does not stop in between
labels.
host device
Fi or Bluetooth.
Move your p
meter) of the mobile device when you
configure the Wi-Fi network settings.
Move
wireless computer, Bluetooth-equipped
If a
device, microwave oven, digital cordless
phone, or other device is near your printer or
the wireless access point/router, move the
device away from your printer or wireless
access point/router.
Is there dirt or lint on the roller preventing it
from rolling freely?
Clean the roller. (See Maintenance.)
heck that the ejection path of the paper is
C
not blocked.
heck that the media roll is set correctly by
C
removing the media roll and reinstalling.
(See Removing the Receipt/Label Roll and
Inserting the Paper or Label Roll.)
Ensure that the media roll compartment
is closed correctly.
Open the
Pr
ess the (Power) button to cancel the
print job.
urn your printer off.
T
heck that you entered the media information
C
correctly. You can set the media information
using Paper Size Setup in the Printer Setting
Tool.
heck that the sensor is not dirty. If the
C
sensor is dirty, wipe it with a dry cotton swab.
rinter within about 3.3 feet (one
your printer to an obstruction-free area.
media roll compartment cover.
cover
Symptom Possible Solutions
Print head, motor, or
ry is too hot.
batte
Printer is in boot mode If you remove the Li-ion battery from your
The thermal head, motor, or battery is too hot.
d:
Hea
If the thermal head becomes too hot, the
mal head may produce imaging on the
ther
paper in areas not intended to be printed.
This condition is normal when printing
documents with a great deal of “black”
content.
Your printer will stop and resume printing
the print head has cooled down.
after
To avoid or delay the onset of this condition,
int using a lighter density setting, reduce
pr
the amount of black space being printed (for
example, remove background shading and
colors in graphs and presentation
documents), and make sure that your printer
has adequate ventilation and is not located
in an enclosed space.
Motor or ba
Do not use your printer continuously. If your
pr
inter is used continuously, the motor or
battery will become too hot. In this case, your
printer will stop and resume printing after the
motor or battery has cooled down.
printer w
your printer will restart in boot mode.
ttery:
hile the firmware is being updated,
Your printer is not
connected corr
network.
ectly to the
1
1
heck that there are no items blocking the
C
sensor.
Check the WLAN icon on the LCD.
The network is connected
:
cor
rectly.
Your printer is searching for the
:
networ
k.
No icon :
The wireless network settings
are disable
d.
Page 7
Maintenance
1
2
3
Product Specifications
Maintenance of your printer may be carried out as required. However, some
environments may require carrying maintenance out more frequently (for
example, dusty environments).
int Head Maintenance
Pr
Wipe the print head with a dry, lint-free cloth moisten
or ethanol. Carry out the maintenance frequently.
1 Print head
oller Maintenance
R
Wipe the roller with a dry, lint-free cloth moistened with isopr
ethanol. After cleaning the roller, make sure that no lint or other material
remains on the roller.
2 Roller
r Exit Slot Maintenance
Pape
If adhesive accumulates at the paper exit slot and media becomes jammed,
the paper exit slot with a cloth slightly moistened with isopropyl alcohol.
clean
ed with isopropyl alcohol
opyl alcohol or
Model Name RJ-2030/2050/2140/2150
Dimensions RJ-2030/2050
Weight RJ-2030/2050
Printing
Media size RJ-2030/2050
Method Direct thermal printing
Interface
USB USB Ver. 2.0 (Full Speed) (mini-B)
Bluetooth
(RJ-2030/2050/2150 only)
Wi-Fi
(RJ-2050/2140/2150 only)
Environment
Operating temperature Printing: 14°F – 122°F/-10°C – 50°C
Operating humidity 10 – 90% (No condensation, Maximum wet bulb
Storage temperature -4°F – 140°F/-20°C – 60°C
Storage humidity 10 – 90% (No condensation, Maximum wet bulb
Approximately 3.9 (D) x 4.8 (W) x 2.2 (H) in. /
) x 122 (W) x 57 (H) mm
100 (D
RJ-2140/2150
Approximately 3.9 (D) x 5.9 (W) x 2.9 (H) in. /
) x 151 (W) x 73 (H) mm
100 (D
Approximately 1.03 lb. / 465 g (including
battery)
RJ-2140/2150
Approximately 1.20 lb. / 545 g (including
battery)
2 in. / 51 mm
RJ-2140/2150
1 in. – 2.28 in. / 25.4 mm – 58 mm
RJ-2030
Ver 2.1 + EDR
Supported profiles: SPP, OPP, BIP, HCRP
RJ-2050/2150
Ver 2.1 + EDR
Supported profiles: SPP, OPP, BIP, HCRP
Supported protocol: iAP
• Wireless Direct: IEEE802.11g/n
• Ad-hoc Mode: IEEE802.11b/g/n
• Infrastructure Mode: IEEE802.11b/g/n
Charge: 41°F – 95°F/5°C – 35°C
ture: 80.6 °F/ 27 °C)
tempera
ture: 113 °F/ 45 °C)
tempera
3 Paper exit slot
Page 8
Printing the Setup Information Page
NOTE
You can use the (Feed) button to print a report that lists the following
printer information:
ogram version
Pr
inter usage history
Pr
Missing dot test patte
Printer se
List of tran
N
• You can use the Printer Setting Tool to set in advance which items will
• The node name appears in the Printer Settings. The default node
• This operation can also be perfor
tting information
sferred data
etwork setting information
be printed.
“BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is based on your
name is
printer’s MAC Address / Ethernet Address.)
1. Make sure that a roll of receipt paper has been loaded and the media
roll compartment cover is closed.
2. Turn on your printer.
3. Press and hold the (Feed) button until "Printing" appears on the
LCD. The printer information will print.
rn
med using the Printer Setting Tool.
For more information, see the User
’s Guide.
Useful Websites
Brother Global Web Site:
Brother Developer Center: www.brother.com/product/dev/
For Frequently Asked Questions (FAQs), Product Support and Technical
Questions, and Driver Updates and Utilities:
www.brother.com
support.brother.com/
Loading...