Brother HL 2070N, HL 2030, HL 2040 User Manual
Read this Quick Setup Guide before using the printer.
Before you can use the printer, you must set up the hardware and install
the driver.
Step 1
Step 2
Laser Printer
HL-2030/2040/2070N
Setting Up Your Printer
Installing the Printer Driver
Setting Up
Your Printer
®
USB
Windows
®
USB
(for Windows®
98/Me/2000/XP)
page 12
Peer-to-
Peer-to-
Peer (LPR)
Peer (LPR)
page 15
page 15
Parallel
(for HL-2040/
2070N)
page 14
Peer-to-
Peer-to-
Peer
Peer
(NetBIOS)
(NetBIOS)
page 15
page 15
Network
(for HL-2070N)
Network
Network
Shared
Shared
Printer
Printer
page 17
page 17
Mac OS® X
10.2.4 or
greater
page 18
USB
Mac OS®
9.1 – 9.2
page 20
Network
(for HL-2070N)
Mac OS® X
10.2.4 or
greater
page 21
Mac OS®
9.1 – 9.2
page 23
Installing the Printer Driver
Parallel
Windows
®
Network
Windows
®
USB
Macintosh
®
Setup is Complete!
Quick Setup Guide
For the latest driver and to find the best solution for your problem or question, access the Brother
Solutions Center directly from the CD-ROM/Driver or go to http://solutions.brother.com
Keep this Quick Setup Guide and supplied CD-ROM in a convenient place for quick and easy
reference at all times.
How to use the printer, see the User’s Guide in the CD-ROM.
Network
Macintosh
For
Administrators
Safety Precautions
To Use the Printer Safely
Electrical
Warning
Warnings tell you what to
do to prevent possible
personal injury.
Electrical Hazard icons
alert you to a possible
electrical shock.
Hazard
Hot Surface Caution
Hot Surface icons warn
you not to touch machine
parts that are hot.
User's Guide
Cautions specify
procedures you must
follow or avoid to prevent
possible damage to the
printer.
Improper
Setup
Improper Setup icons
alert you to devices and
operations that are not
compatible with the
printer.
Notes tell you how you
should respond to a
situation that may arise or
give tips about how the
current operation works
with other features.
Note
Warning
There are high voltage electrodes inside the printer.
Before you clean the inside of the printer, make sure
you have turned off the power switch and unplugged
the printer from the AC power outlet.
Do not handle the plug with wet hands. Doing this might
cause an electrical shock.
Network
User's Guide
Indicates reference to the
User's Guide or Network
User's Guide which is on
the CD-ROM we have
supplied.
After you have just used the printer, some internal parts
of the printer are extremely hot. When you open the
front or back cover of the printer, never touch the
shaded parts shown in the illustration.
The fuser unit is marked with the caution labels. Please
do not remove or damage the labels.
Do not use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside
the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a dry, lint-free cloth and
dispose of it according to local regulations.
Inside the printer
(Front View)
Open the back cover
(Back View)
Table of Contents
To Use the Printer Safely ..........................................................................................................2
Regulations ................................................................................................................................2
■ Getting Started
Carton Components ..................................................................................................................4
Control Panel .............................................................................................................................5
Supplied CD-ROM ......................................................................................................................6
Step 1
■ Insert the CD-ROM into the CD-ROM Drive ....................................................................7
■ Install the Drum Unit Assembly ......................................................................................8
■ Load Paper in the Paper Tray ..........................................................................................9
■ Print a Test Page ............................................................................................................10
Step 2
For USB Interface Cable Users (Windows® 98/Me/2000/XP Users) ...................................12
For Parallel Interface Cable Users (HL-2040/2070N Users) ................................................14
For Network Interface Cable Users (HL-2070N Users) ........................................................15
■ For Brother Peer-to-Peer Network Printer Users (LPR / NetBIOS) ............................15
■ For Network Shared Printer Users ................................................................................17
For USB Interface Cable Users ..............................................................................................18
■ For Mac OS
■ For Mac OS
For Network Interface Cable Users (HL-2070N Users) ........................................................21
■ For Mac OS
■ For Mac OS
Setting Up Your Printer
Installing the Printer Driver
®
X 10.2.4 or greater Users ........................................................................18
®
9.1 to 9.2 Users ........................................................................................20
®
X 10.2.4 or greater Users ........................................................................21
®
9.1 to 9.2 Users ........................................................................................23
■ For Administrators (HL-2070N Users)
Installing the BRAdmin Professional Configuration Utility (Windows® Users Only) ........24
Setting your IP Address, Subnet Mask and Gateway using BRAdmin Professional
(Windows
Web browser ............................................................................................................................25
Network Factory Default Setting ............................................................................................25
Print the Printer Settings Page ...............................................................................................25
®
Users Only) .....................................................................................................24
■ Other Information
Shipment of the Printer ...........................................................................................................26
Option .......................................................................................................................................27
Consumables ...........................................................................................................................27
■ Troubleshooting User’s Guide Chapter 6
1
Regulations
Federal Communications Commission (FCC) Declaration of
Conformity (For USA)
Responsible Party: Brother International Corporation
declares, that the products
Product name: Laser Printer
Model number: Laser Printer HL-2030, HL-2040 and HL-2070N
Model number: HL-20
Product options: ALL
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911
USA
Telephone: (908) 704-1700
Important
A shielded interface cable should be used in order to ensure compliance with
the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd.
could void the user's authority to operate the equipment.
Industry Canada Compliance Statement (For Canada)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Radio interference (220-240 volt model only)
This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use the following interface
cables.
1. A shielded parallel interface cable with twisted-pair conductors and that it
is marked "IEEE 1284 compliant".
2. A USB cable.
The cable must not be more than 2 meters long.
International ENERGY STAR® Compliance Statement
The purpose of the International ENERGY STAR® Program is to promote
the development and popularization of energy-efficient office equipments.
As an
ENERGY STAR
that this product meets the
efficiency.
®
Partner, Brother Industries, Ltd. has determined
ENERGY STAR
®
guidelines for energy
Laser Safety (100 to 120 volt Model Only)
This printer is certified as a Class 1 laser product under the U.S. Department
of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. This
means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within
protective housings and external covers, the laser beam cannot escape from
the machine during any phase of user operation.
2
FDA Regulations (100 to 120 volt Model Only)
U.S. Food and Drug Administration (FDA) has implemented regulations for
laser products manufactured on and after August 2, 1976. Compliance is
mandatory for products marketed in the United States. One of the following
labels on the back of the printer indicates compliance with the FDA
regulations and must be attached to laser products marketed in the United
States.
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA performance standards for laser
products except for deviations pursuant to Laser Notice No.50, dated
July 26, 2001.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA performance standards for laser
products except for deviations pursuant to Laser Notice No.50, dated
July 26, 2001.
☛ Caution: Use of controls, adjustments or performance of
procedures other than those specified in this manual may
result in hazardous radiation exposure.
IEC 60825-1 specification (220 to 240 volt model only)
This printer is a Class 1 laser product as defined in IEC 60825-1
specifications. The label shown below is attached in countries where it is
needed.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
Disconnect device
You must install this printer near a power outlet that is easily accessible. In
case of an emergency, you must disconnect the power cord from the power
outlet to shut off the power completely.
Caution for LAN connection (For model HL-2070N only)
Connect this product to a LAN connection that is not subjected to over
voltages.
IT power system (For Norway only)
This product is also designed for an IT power system with phase-to-phase
voltage 230V.
Wiring information (for UK)
Important
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
If in any doubt, call a qualified electrician.
This printer has a Class 3B laser diode which produces invisible laser
radiation in the scanner unit. You should not open the scanner unit under any
circumstances.
☛ Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
For Finland and Sweden
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
☛ Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa
☛ Varning Om apparaten används på annat sätt än i denna
mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
Bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för
laserklass 1.
Internal laser radiation
Maximum radiation power: 5 mW
Wave length: 770 - 810 nm
Laser class: Class 3B
IMPORTANT - For Your Safety
To ensure safe operation the supplied three-pin plug must be inserted only
into a standard three-pin power outlet that is properly grounded through the
normal household wiring.
Extension cords used with this printer must be three-pin plug type and
correctly wired to provide proper grounding. Incorrectly wired extension
cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the
power is grounded and that the installation is completely safe. For your
safety, if in any doubt about the effective grounding of the power, call a
qualified electrician.
3
■ Getting Started
Carton Components
Printer
1
2
3
4
7
1
Face-down Output Tray Support Flap (Support Flap)
2 Control Panel
3 Front Cover
4 Manual Feed Slot
5 Paper Tray
6 Power Switch
5
7 Face-down Output Tray (Top Output Tray)
6
CD-ROM
(including User's Guide)
Carton components may differ from one country to another.
Save all packing materials and the printer carton in case for any reason you must ship your printer.
Quick Setup Guide Drum Unit Assembly
(including toner cartridge)
AC Power Cord
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the
interface you intend to use (USB, Parallel or Network).
■ USB cable
Do not use a USB interface cable that is longer than 6 feet (2.0 meters).
Do not connect the USB cable to a non-powered hub or a Mac
When you use a USB cable, make sure you connect it to the USB connector of your PC.
USB is not supported under Windows
■ Parallel interface (For HL-2040 and HL-2070N)
Do not use a Parallel interface cable that is longer than 6 feet (2.0 meters).
Use a shielded interface cable that is IEEE 1284-compliant.
■ Network cable (For HL-2070N)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
®
95 or Windows NT®4.0.
®
keyboard.
4
Control Panel
Toner - LED indicates when the Toner is low or empty.
1
Drum - LED indicates when the Drum is nearing end of life.
2
Paper - LED indicates when there is Cover open or a paper jam.
3
Ready - LED indicates when the printer is ready or if Data is remaining.
4
Go Button - Wake-up / Error recovery / Form feed / Cancel printing
5
Reprint
User's Guide Chapter 3.
Printer LED Indications
: Blinking : ON : OFF
Printer LED Sleep / OFF Warming Up Ready Receiving Data Data Remaining
Toner
Drum
Paper
Ready
Printer LED Toner Low
Toner
Drum
Paper
Ready
User's Guide
Yellow* Yellow Yellow
Green Green Green
Chapter 5 Chapter 5 Chapter 5 Chapter 6 Chapter 1 Chapter 3
* The LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.
Toner Life
Green Green Green Green
End
Drum Life
End Soon
Yellow* Yellow
Cover Open /
Paper Jam
Red
No Paper
Fed Tray
Red
Service call
Red
5
Supplied CD-ROM
You can find a variety of information on the CD-ROM.
1 Initial Setup
Instructional movie for printer setup.
Mac OS® X
10.2.4 or
greater
Users
Mac OS®
9.1 to 9.2
Users
4
1
2
3
4
5
6
1
2
4
5
6
This screen is not supported by Mac OS® 9.1 to 9.2.
2 Install Printer Driver
Install the printer driver.
3 Install Other Drivers or Utilities
Install optional drivers, utilities and Network management tools.
4 Documentation
View the Printer User's Guide and Network User's Guide in PDF format. (Viewer included)
You can also view the User’s Guide in HTML format by accessing the Brother Solutions Center.
■ The User’s Guide in PDF format will be installed automatically when you install the driver. (For Windows
only) From the Start button, select Programs, your printer (e.g. Brother HL-2070N), and User’s Guide. If you
do not want to install the User’s Guide, select Custom setup from Install Printer Driver, and de-select User’s
Guide in PDF format when you install the driver.
®
users
5 On-Line Registration
Register your product on-line.
6 Brother Solutions Center
The Brother Solutions Center (http://solutions.brother.com) is a one-stop resource for all your printer needs.
Download the latest drivers and utilities for your printers, read the FAQs and troubleshooting tips
get the most from your Brother product.
to learn how to
For visually impaired users, we have prepared the HTML file on
the supplied CD-ROM: readme.html. This file can be read by
Screen Reader 'text-to-speech' software.
6
Step 1
Setting Up Your Printer
1 Insert the CD-ROM into the CD-ROM Drive
For Windows® Users
Do NOT connect the interface cable.
You will be prompted to connect the
interface cable during the driver
installation.
1 Insert the CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically.
Select your printer model and the language.
2 Click the Initial Setup icon on the menu
screen.
For Macintosh® Users
Do NOT connect the interface cable.
You will be prompted to connect the
interface cable during the driver
installation.
1 For Mac OS
Go to page 8.
For Mac OS
Insert the CD-ROM into your CD-ROM
drive, and then double-click the HL2000
icon on your Desktop. Double-click the Start
Here OS X icon. Follow the on-screen
instructions.
Mac OS® X
10.2.4 or
greater Users
®
9.1 to 9.2 Users:
®
10.2.4 or greater Users:
Setting Up
Your Printer
®
USB
Windows
®
Parallel
Windows
®
Network
Windows
3 You can view the initial setup instructions
and follow the steps on pages 8 to 10.
2 Click the Initial Setup icon on the menu
screen.
3 You can view the initial setup instructions
and follow the steps on pages 8 to 10.
Installing the Printer Driver
®
USB
Macintosh
®
Network
Macintosh
For
Administrators
7
Loading...