Page 1
Laser Printer HL-1650/1670N
Quick Setup Guide
For all users
Read the "Safety Sheet" first to ensure that you use this printer safety.
Read this "Quick Setup Guide" before you set up the printer.
Before you can use the printer, you must set up the hardware and install the driver.
Identify the operating system on your computer (Windows
Windows
®
2000 or Macintosh®).
®
95 / 98 / Me, Windows NT® 4.0,
The interface cable is not a standard accessory. Some computers have both a USB and a
parallel port. Please purchase the appropriate interface cable for the interface you intend to
use (parallel, USB or Network).
Follow the instructions in this guide for your operating system and interface.
Carton components
Carton components may differ from one country to another.
Save all packing materials and the printer carton. They should be used when shipping the printer.
DocumentsCD-ROM
Printer
Step 1 Insert the CD-ROM into the CD-ROM drive
For Windo ws® users only
Insert the CD-ROM into the CD-ROM drive.
1
The opening screen will appear
automatically.
Click the Initial Setup icon.
3
Select the language you want.
2
You can view the Initial Setup
4
instructions.
For Macintosh® users only
Insert the CD-ROM into the CD-ROM
1
drive.
Select the language you want.
3
Double-click the Initial Setup icon.
2
You can view the Initial Setup
4
instructions.
Drum unit assembly
(with toner cartridge included)
AC power cord
What is included on the CD-ROM
You can get a variety of information from this CD-ROM.
Windows
Macintosh
Initial setup
See the complete setup
process from hardware setup
to driver installation on a
movie.
We recommend that you
follow these instructions when
you first setup the printer.
®
®
Install Software (only for
Windows®)
You can install not only the
printer driver but also the
following utility items.
For all users
-Printer Driver
-Automatic E-mail Printing
For administrators
-BRAdmin Professional
-Network Printer Driver Wizard
-Network Print Software
-Storage Manager
Printer Driver Installer (only
for Macintosh
®
with USB)
Manual
View the Printer User's Guide,
Network User's Guide and
other documentation.
Brother Solutions Center
Introduction to the Brother
user support web page.
You can easily access it and
receive the latest drivers and
information for this printer.
Maintenance T utorial
See the maintenance videos
for this printer.
We recommend that you view
the videos before getting
started.
Make Disk Sets (only for
Windows
LJ5025001 Printed in China
®
)
Step 2 Install the drum unit assembly
Front cover
Press the cover release button, and then open
1
the front cover.
Cover release
button
Remove the protective part.
2
3
Step 3 Load paper into the paper cassette
Paper guide release lever
Universal guide
release lever
Paper cassette
Pull the paper cassette completely
1
out of the printer.
While pressing the paper guide release lever, slide the adjusters to
2
fit the paper size. Check that they fit correctly into the slots.
Note: For Legal or 8.5 x 13 in. paper, press the universal guide
release lever as you extend the rear of the paper cassette.
Step 4 Print a test page
O I
O I
OFF ON
OFF ON
Unpack the drum unit assembly.
Rock it from side to side 5 or 6 times to
distribute the toner evenly inside the
assembly.
Load paper into the paper cassette.
3
Check that the paper is flat in the tray and below
the maximum paper mark.
Extend the tray
extension flap
READY
Data
Back
Reprint
Set
Job cancel
Go
Install the drum unit assembly
4
into the printer.
Up to here
PRINTING
Data
Back
Reprint
Set
Job cancel
Go
Close the front cover.
5
Re-install the paper cassette
4
into the printer.
BR-Script PPD Installer (only
for Macintosh® with Network)
©2000 Brother Industries, Ltd.
Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Macintosh
All other brand and product names are trademarks or registered trademarks of their respective holders.
®
and iMac® are registered trademarks of Apple Computer, Inc.
Make sure the printer power switch is off.
1
Connect the AC power cord to the printer.
Do not connect the interface cable.
Plug the AC power cord into an AC
2
outlet.
Turn the power switch on.
After the printer has finished warming up,
3
the READY message appears.
Press the Go switch. The printer prints a test page.
4
Check that the test page is printed correctly.
Note: When you want to set the control panel message language,
refer to the control panel section on the reverse side of this sheet.
Continue to the reverse side.
Page 2
Follow the instructions for your interface cable and operating system.
®
For Parallel interface cable users (For Windows
users only)
Step 5 Connect the printer to your PC & Install the printer driver
O I
OFF ON
O I
OFF ON
Click "Connect the interface cable and
1
install the printer driver / utilities".
Select the parallel interface
2
cable.
Turn the printer power switch off.
3
®
For USB interface cable users (For Windows
users only)
Step 5 Install the driver & Connect the printer to your PC
Note: When the "Add New Hardware
Wizard" appears on your PC, click the
Cancel button.
Note: Start installing the driver before
you connect the USB interface cable to
the printer. If you have already
connected it, remove it.
Click "Connect the interface
1
cable and install the printer
driver / utilities".
Select the USB cable.
2
3
Connect the interface cable to your PC, and
4
then connect it to the printer.
Click the Next button.
Turn the printer power
5
switch on.
Note: If "Add New Hardware Wizard"
appears, click the Cancel button.
Click the Next button.
6
Click the Finish button.
7
The setup is now complete.
®
For USB interface cable users (For Macintosh
users only)
Step 5 Install the Driver & Connect the Printer to your Macintosh
O I
OFF ON
Double-click the Printer Driver Installer icon, and
1
then follow the instructions on the screen.
Make sure the printer power switch
2
is on.
Connect the USB interface cable to your Macintosh®, and
3
then connect it to the printer.
®
O I
OFF ON
Click the OK button.
4
Make sure the printer power switch is
5
on.
Step 6 Setting your PC printer port
After your PC has restarted, click Start,
1
Setting and Printers.
Select the Brother HL-1650/1670N
2
series (copy2) icon.
Connect the USB interface cable to your PC, and then
6
connect it to the printer.
®
For Windows
For Windows
98/Me users: The setup is now complete.
®
2000 users: Go to Step 6.
(For W indo ws® 2000 users only)
Click on the File menu, and then
3
select Set as Default printer.
The setup is now complete.
Open the Chooser from the Apple® menu on the
4
Macintosh
®
.
Control Panel
Data
For more information, see Chapter
3 "CONTROL PANEL" in the User's
Guide.
Reprint
Job cancel
Back
Set
Go
Click the HL-1650/1670N icon and select it.
5
The setup is now complete.
Data LED : Orange
On
Blinking
Off
Data remains in the printer buffer.
Receiving or processing data.
No remaining data.
Switches
Go
Job Cancel
Reprint
Menu
Set
Back
Exit from the control panel menu, reprint settings and clear error messages.
Pause / Continue printing.
Stop and cancel the printer operation in progress.
Select the reprint menu.
Move forward and backward through menus.
Move forward and backward through selectable options.
Select the control panel menu.
Set the selected menus and the settings.
Go back one level in the menu structure.
Language Setting (Default setting is English)
1. Select the SETUP mode by pressing the
2. Check that the LANGUAGE message appears, and press the Set switch.
3. Choose your language by pressing the
appears at the end of the display.
(You can return to the READY status by pressing the Go switch.)
+ switch, and press the Set switch.
+ or - switch, and press the Set switch. An asterisk mark (
)
*
For
Network users
If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.
After the administrator has made the required settings, install the driver referring to the "Installing the
Driver for Network users" section of the Quick Network Setup Guide.
For HL-1650 user: Install the optional Network board (NC-4100h) referring to Chapter 4 of the
printer.
Loading...