DCP-L5500DN

Brother DCP-L5500DN, DCP-L5600DN, DCP-L5650DN, MFC-L5700DW, MFC-L5705DW User's Guide

...

Online User's Guide

DCP-L5500DN DCP-L5600DN DCP-L5650DN MFC-L5700DW MFC-L5705DW MFC-L5800DW MFC-L5850DW MFC-L5900DW MFC-L6700DW MFC-L6800DW

Home > Table of Contents
Table of Contents
Before You Use Your Brother Machine ...............................................................................................	1
Applicable Models ..........................................................................................................................................	2
Definitions of Notes ........................................................................................................................................	3
Notice - Disclaimer of Warranties (USA and Canada) ...................................................................................	4
Trademarks ....................................................................................................................................................	5
Important Note ...............................................................................................................................................	6
Introduction to Your Brother Machine.................................................................................................	7
Before Using Your Machine ...........................................................................................................................	8
Control Panel Overview .................................................................................................................................	9
Touchscreen LCD Overview.........................................................................................................................	11
How to Navigate the Touchscreen LCD .......................................................................................................	15
Settings Screen Overview............................................................................................................................	17
Setting the Home Screen .............................................................................................................................	19
Access Brother Utilities (Windows) ..............................................................................................................	20
Uninstall the Brother Software and Drivers (Windows) ......................................................................	22
Paper Handling....................................................................................................................................	23
Load Paper...................................................................................................................................................	24
Load and Print Using the Paper Tray .................................................................................................	25
Load and Print Using the Multi purpose Tray (MP Tray) ....................................................................	32
Paper Settings..............................................................................................................................................	40
Change the Paper Size and Paper Type............................................................................................	41
Select the Tray to Be Used For Printing .............................................................................................	42
Change the Check Paper Size Setting...............................................................................................	43
Recommended Print Media .........................................................................................................................	44
Load Documents ..........................................................................................................................................	45
Load Documents in the Automatic Document Feeder (ADF) .............................................................	46
Load Documents on the Scanner Glass.............................................................................................	48
Unscannable and Unprintable Areas ...........................................................................................................	49
Using Special Paper.....................................................................................................................................	50
Print ......................................................................................................................................................	51
Print from Your Computer (Windows)...........................................................................................................	52
Print a Document (Windows)..............................................................................................................	53
Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)......................................	55
Print as a Poster (Windows) ...............................................................................................................	56
Print on Both Sides of the Paper (Windows) ......................................................................................	57
Print as a Booklet (Windows) .............................................................................................................	60
Secure Print (Windows)......................................................................................................................	62
Use a Macro from Your Computer (Windows)....................................................................................	63
Use a Preset Print Profile (Windows) .................................................................................................	64
Change the Default Print Settings (Windows) ....................................................................................	67
Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation)
(Windows) ..........................................................................................................................................	69
Monitor the Status of the Machine from Your Computer (Windows) ..................................................	70
Print Settings (Windows) ....................................................................................................................	71
Print from Your Computer (Mac) ..................................................................................................................	75
	i

Home > Table of Contents
Print a Document (Mac) .....................................................................................................................	76
Print on Both Sides of the Paper (Mac)..............................................................................................	77
Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac) .............................................	79
Secure Print (Mac) .............................................................................................................................	80
Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation)
(Mac) ..................................................................................................................................................	81
Monitor the Status of the Machine from Your Computer (Mac) ..........................................................	82
Print Options (Mac) ............................................................................................................................	84
Print One Page Duplicates on Different Types of Paper ..............................................................................	89
Cancel a Print Job........................................................................................................................................	90
Test Print ......................................................................................................................................................	91
Scan......................................................................................................................................................	92
Scan Using the Scan Button on Your Brother Machine ...............................................................................	93
Scan Photos and Graphics.................................................................................................................	94
Save Scanned Data to a Folder as a PDF File ..................................................................................	96
Save Scanned Data to a USB Flash Drive.........................................................................................	98
Scan to an Editable Text File (OCR) ................................................................................................	100
Scan to Email Attachment ................................................................................................................	102
Send Scanned Data to an Email Server...........................................................................................	104
Scan to FTP .....................................................................................................................................	106
Scan to SSH FTP (SFTP) .................................................................................................................	111
Scan to Network (Windows) .............................................................................................................	119
Scan to SharePoint ..........................................................................................................................	124
Web Services for Scanning on Your Network (Windows Vista SP2 or greater, Windows 7 and
Windows 8).......................................................................................................................................	129
Change Scan Button Settings from ControlCenter4 (Windows).......................................................	133
Change Scan Button Settings from ControlCenter2 (Mac) ..............................................................	136
Change Scan Button Settings from Brother iPrint&Scan ................................................................	140
Configure Certificate for Signed PDF ...............................................................................................	141
Disable Scanning from Your Computer ............................................................................................	142
Scan from Your Computer (Windows)........................................................................................................	143
Scan Using ControlCenter4 Home Mode (Windows) .......................................................................	144
Scan Using ControlCenter4 Advanced Mode (Windows).................................................................	161
Scan Using Brother iPrint&Scan (Windows/Mac).............................................................................	178
Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications.......................................	179
Scan Using Windows Photo Gallery or Windows Fax and Scan......................................................	184
Scan from Your Computer (Mac)................................................................................................................	187
Scan Using ControlCenter2 (Mac) ...................................................................................................	188
Scan Using TWAIN-Compliant Applications (Mac)...........................................................................	201
Configure Scan Settings Using Web Based Management.........................................................................	204
Set the Scan File Name Using Web Based Management................................................................	205
Set the Scan Job Email Report Using Web Based Management ....................................................	206
Copy ...................................................................................................................................................	207
Copy a Document ......................................................................................................................................	208
Enlarge or Reduce Copied Images ............................................................................................................	210
Make N in 1 Copies Using the Page Layout Feature .................................................................................	211
Sort Copies ................................................................................................................................................	213
	ii

Home > Table of Contents
Copy an ID Card ........................................................................................................................................	214
Copy on Both Sides of the Paper (2-sided Copy) ......................................................................................	215
Copy Options .............................................................................................................................................	217
Fax ......................................................................................................................................................	219
Send a Fax.................................................................................................................................................	220
Send a Fax .......................................................................................................................................	221
Send a 2-sided Fax from the ADF....................................................................................................	223
Send a Fax Manually........................................................................................................................	224
Send a Fax at the End of a Conversation ........................................................................................	225
Send the Same Fax to More than One Recipient (Broadcasting) ....................................................	226
Send a Fax in Real Time ..................................................................................................................	228
Send a Fax at a Specified Time (Delayed Fax)................................................................................	229
Add a Cover Page to Your Fax.........................................................................................................	230
Cancel a Fax in Progress .................................................................................................................	233
Check and Cancel a Pending Fax....................................................................................................	234
Fax Options ......................................................................................................................................	235
Receive a Fax ............................................................................................................................................	236
Receive Mode Settings ....................................................................................................................	237
Memory Receive (Remote Fax) Options ..........................................................................................	247
Remote Fax Retrieval.......................................................................................................................	255
Voice Operations and Fax Numbers ..........................................................................................................	261
Voice Operations ..............................................................................................................................	262
Store Fax Numbers ..........................................................................................................................	270
Set up Groups for Broadcasting .......................................................................................................	274
Dial Access Codes and Credit Card Numbers .................................................................................	278
Telephone Services and External Devices.................................................................................................	279
Voice Mail .........................................................................................................................................	280
Distinctive Ring.................................................................................................................................	281
External TAD (Telephone Answering Device)...................................................................................	285
External and Extension Telephones .................................................................................................	288
Multi-line Connections (PBX) ...........................................................................................................	294
Fax Reports................................................................................................................................................	295
Print a Transmission Verification Report ..........................................................................................	296
Print a Fax Journal ...........................................................................................................................	297
PC-FAX ......................................................................................................................................................	298
PC-FAX for Windows........................................................................................................................	299
PC-FAX for Mac ...............................................................................................................................	324
Print Data Directly from a USB Flash Drive ....................................................................................	327
Compatible USB Flash Drives....................................................................................................................	328
Print Data Directly from a USB Flash Drive or Digital Camera Supporting Mass Storage.........................	329
Create a PRN File for Direct Printing (Windows) .......................................................................................	331
Network ..............................................................................................................................................	332
Get Started.................................................................................................................................................	333
Supported Basic Network Features..................................................................................................	334
Network Management Software and Utilities .............................................................................................	335
Learn about Network Management Software and Utilities ...............................................................	336
Additional Methods of Configuring Your Brother Machine for a Wireless Network ....................................	337
	iii

Home > Table of Contents
Before Configuring Your Brother Machine for a Wireless Network...................................................	338
Configure Your Machine for a Wireless Network..............................................................................	339
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected
Setup™ (WPS)..................................................................................................................................	340
Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected
Setup™ (WPS)..................................................................................................................................	341
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) .............	344
Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard348
Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast ........................	350
Configure Your Machine for an Enterprise Wireless Network ..........................................................	352
Use Wi-Fi Direct® .............................................................................................................................	355
Advanced Network Features......................................................................................................................	365
Print the Network Configuration Report............................................................................................	366
Configure Your Mail Server Settings Using Web Based Management.............................................	367
Configure the Brother Machine for Email or Internet Fax (I-Fax) .....................................................	370
I-Fax Options ....................................................................................................................................	385
Use the Send Fax to Server Feature................................................................................................	390
Print the WLAN Report .....................................................................................................................	394
Configure and Operate LDAP Search ..............................................................................................	397
Synchronize Time with the SNTP Server Using Web Based Management .....................................	400
Technical Information for Advanced Users.................................................................................................	404
Gigabit Ethernet (Wired Network Only) ............................................................................................	405
Reset the Network Settings to the Factory Settings.........................................................................	407
Security ..............................................................................................................................................	408
Lock the Machine Settings .........................................................................................................................	409
About Using Setting Lock .................................................................................................................	410
Network Security Features.........................................................................................................................	414
Before Using Network Security Features .........................................................................................	415
Secure Function Lock 3.0.................................................................................................................	416
Use Active Directory Authentication .................................................................................................	423
Use LDAP Authentication .................................................................................................................	428
Manage Your Network Machine Securely Using SSL/TLS...............................................................	432
Manage Your Network Machine Securely Using IPsec ....................................................................	465
Send or Receive an Email Securely .................................................................................................	483
Use IEEE 802.1x Authentication for a Wired or a Wireless Network ...............................................	489
Store Print Log to Network ...............................................................................................................	494
Mobile/Web Connect .........................................................................................................................	500
Use Web Services from Your Brother Machine..........................................................................................	501
Print with AirPrint........................................................................................................................................	502
Print with Mopria® ......................................................................................................................................	503
Print and Scan Using Near-Field Communication (NFC)...........................................................................	504
Brother iPrint&Scan..........................................................................................................................	505
Brother iPrint&Scan Overview for Windows and Mac ................................................................................	506
ControlCenter ....................................................................................................................................	507
ControlCenter4 (Windows).........................................................................................................................	508
Change the Operation Mode in ControlCenter4 (Windows) ............................................................	509
Scan Using ControlCenter4 Home Mode (Windows) .......................................................................	511
	iv

Home > Table of Contents
Scan Using ControlCenter4 Advanced Mode (Windows).................................................................	512
Set Up the Brother Machine Using ControlCenter4 (Windows) .......................................................	513
Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows).......................................	515
ControlCenter2 (Mac).................................................................................................................................	517
Scan Using ControlCenter2 (Mac) ...................................................................................................	518
Set Up the Brother Machine Using ControlCenter2 (Mac) ...............................................................	519
Troubleshooting ................................................................................................................................	521
Error and Maintenance Messages .............................................................................................................	522
Transfer Your Faxes or Fax Journal Report .....................................................................................	528
Document Jams .........................................................................................................................................	532
Document is Jammed in the Top of the ADF Unit ............................................................................	533
Document is Jammed under the Document Cover ..........................................................................	534
Remove Small Scraps of Paper Jammed in the ADF ......................................................................	535
Paper Jams ................................................................................................................................................	536
Paper is Jammed in the MP tray ......................................................................................................	537
Paper is Jammed in the Paper Tray .................................................................................................	538
Paper is Jammed in the Back of the Machine ..................................................................................	540
Paper is Jammed inside the Machine ..............................................................................................	542
Paper is Jammed in the 2-sided Tray...............................................................................................	544
Printing Problems.......................................................................................................................................	547
Improve the Print Quality............................................................................................................................	549
Telephone and Fax Problems ....................................................................................................................	553
Set Dial Tone Detection ....................................................................................................................	557
Set Telephone Line Compatibility for Interference and VoIP Systems .............................................	558
Network Problems......................................................................................................................................	559
Error Messages ................................................................................................................................	560
Use the Network Connection Repair Tool (Windows) ......................................................................	562
Where Can I Find My Brother Machine's Network Settings? ...........................................................	563
I Cannot Complete the Wireless Network Setup Configuration........................................................	564
My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network.............................	566
I Want to Check that My Network Devices are Working Correctly ...................................................	568
Other Problems ..........................................................................................................................................	569
Check the Machine Information .................................................................................................................	571
Reset Your Brother Machine ......................................................................................................................	572
Reset Functions Overview ...............................................................................................................	573
Routine Maintenance ........................................................................................................................	574
Replace Supplies .......................................................................................................................................	575
Replace the Toner Cartridge ............................................................................................................	577
Replace the Drum Unit .....................................................................................................................	580
Reset the Drum Counter ..................................................................................................................	583
Clean the Machine .....................................................................................................................................	584
Clean the Scanner............................................................................................................................	586
Clean the Touchscreen LCD ............................................................................................................	587
Clean the Corona Wire .....................................................................................................................	588
Clean the Drum Unit .........................................................................................................................	590
Clean the Paper Pick-up Rollers ......................................................................................................	594
Check the Remaining Life of Parts.............................................................................................................	596
	v

Home > Table of Contents
Pack and Ship Your Machine .....................................................................................................................	597
Pack the Machine and the Toner Cartridge Together .......................................................................	598
Pack the Machine and the Toner Cartridge Separately....................................................................	600
Replace Periodic Maintenance Parts .........................................................................................................	603
Machine Settings...............................................................................................................................	604
Change Machine Settings from the Control Panel .....................................................................................	605
In the Event of Power Failure (Memory Storage) .............................................................................	606
General Settings...............................................................................................................................	607
Save Your Favorite Settings as a Shortcut.......................................................................................	624
Print Reports ....................................................................................................................................	627
Settings and Features Tables...........................................................................................................	630
Change Machine Settings from Your Computer.........................................................................................	662
Change Machine Settings Using Web Based Management ............................................................	663
Change the Machine Settings Using Remote Setup ........................................................................	668
Appendix............................................................................................................................................	680
Specifications .............................................................................................................................................	681
How to Enter Text on Your Brother Machine ..............................................................................................	691
Supplies .....................................................................................................................................................	692
Accessories................................................................................................................................................	694
Brother Help and Customer Support..........................................................................................................	695
Glossary.............................................................................................................................................	697

Home > Before You Use Your Brother Machine

Before You Use Your Brother Machine

•Applicable Models

•Definitions of Notes

•Notice - Disclaimer of Warranties (USA and Canada)

•Trademarks

•Important Note

Home > Before You Use Your Brother Machine > Applicable Models

Applicable Models

This User's Guide applies to the following models:

DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5705DW/MFC-L5800DW/MFC-L5850DW/ MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

Related Information

• Before You Use Your Brother Machine

Home > Before You Use Your Brother Machine > Definitions of Notes

Definitions of Notes

We use the following symbols and conventions throughout this User's Guide:

WARNING			WARNING indicates a potentially hazardous situation which, if not avoided, could
WARNING			result in death or serious injuries.

CAUTION			CAUTION indicates a potentially hazardous situation which, if not avoided, may
CAUTION			result in minor or moderate injuries.

IMPORTANT			IMPORTANT indicates a potentially hazardous situation which, if not avoided, may

			result in damage to property or loss of product functionality.

NOTE			NOTE specifies the operating environment, conditions for installation, or special

			conditions of use.

			Tips icons indicate helpful hints and supplementary information.

			Electrical Hazard icons alert you to possible electrical shock.

			Fire Hazard icons alert you to the possibility of a fire.


			Hot Surface icons warn you not to touch hot machine parts.


			Prohibition icons indicate actions you must not perform.

Bold			Bold style identifies buttons on the machine's control panel or computer screen.

Italics			Italicized style emphasizes an important point or refers you to a related topic.

Courier New			Courier New font identifies messages shown on the machine's LCD.

Related Information

• Before You Use Your Brother Machine

Home > Before You Use Your Brother Machine > Notice - Disclaimer of Warranties (USA and Canada)

Notice - Disclaimer of Warranties (USA and Canada)

BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT BROTHER’S LICENSOR’S LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.

Related Information

• Before You Use Your Brother Machine

Home > Before You Use Your Brother Machine > Trademarks

Trademarks

BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.

Microsoft, Windows, Windows Vista, Windows Server, SharePoint, Internet Explorer, Outlook, PowerPoint, Active Directory, OneNote, Windows phone and OneDrive are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Apple, AirPrint, Mac, Safari, iPad, iPhone, iPod touch, OS X and macOS are trademarks of Apple Inc., registered in the United States and other countries.

Nuance and PaperPort are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries.

PostScript and PostScript 3 are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Wi-Fi CERTIFIED, Wi-Fi, Wi-Fi Alliance, Wi-Fi Direct and Wi-Fi Protected Access are registered trademarks of Wi-Fi Alliance®.

WPA, WPA2, Wi-Fi Protected Setup and Wi-Fi Protected Setup logo are trademarks of Wi-Fi Alliance®.

Android, Google Drive, Google Play and Google Chrome are trademarks of Google Inc. Use of these trademarks is subject to Google Permissions.

Mopria is a trademark of Mopria Alliance, Inc.

UNIX is a registered trademark of The Open Group in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Intel is a trademark of Intel Corporation in the U.S. and/or other countries. Evernote is a trademark of Evernote Corporation and used under a license.

Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.

Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.

Related Information

• Before You Use Your Brother Machine

Home > Before You Use Your Brother Machine > Important Note

Important Note

•Do not use this product outside the country of purchase as it may violate the wireless telecommunication and power regulations of that country.

•Not all models are available in all countries.

•Windows XP in this document represents Windows XP Professional, Windows XP Professional x64 Edition and Windows XP Home Edition.

•Windows Server 2003 in this document represents Windows Server 2003, Windows Server 2003 x64 Edition, Windows Server 2003 R2 and Windows Server 2003 R2 x64 Edition.

•Windows Server 2008 in this document represents Windows Server 2008 and Windows Server 2008 R2.

•Unless otherwise specified, the screens in this manual are from Windows 7 and OS X v10.9.x. Screens on your computer may vary depending on your operating system.

•The contents of this guide and the specifications of this product are subject to change without notice.

•This documentation is for both MFC and DCP models. Read 'XXX-XXXX' as 'MFC/DCP-XXXX' (where XXXX is the name of your model).

•Not all features are available in countries subject to applicable export restrictions.

Related Information

• Before You Use Your Brother Machine

Home > Introduction to Your Brother Machine

Introduction to Your Brother Machine

•Before Using Your Machine

•Control Panel Overview

•Touchscreen LCD Overview

•How to Navigate the Touchscreen LCD

•Settings Screen Overview

•Setting the Home Screen

•Access Brother Utilities (Windows)

Home > Introduction to Your Brother Machine > Before Using Your Machine

Before Using Your Machine

Before attempting any printing operation, confirm the following:

•Make sure you have installed the Brother software and drivers.

•For USB or network cable users: Make sure the interface cable is physically secure.

Simultaneous printing, scanning and faxing

Your machine can print from your computer while sending or receiving a fax into memory or while scanning a document into the computer. Fax sending will not be stopped during printing from your computer. However, when the machine is copying or receiving a fax on paper, it pauses the printing operation, and then continues printing when copying or fax receiving has finished.

DCP models do not support the fax feature.

Firewall (Windows)

If your computer is protected by a firewall and you are unable to network print, network scan, or PC-FAX, you may need to configure the firewall settings. If you are using the Windows Firewall and you installed the Brother software and drivers from the CD-ROM, the necessary firewall settings have already been set. If you are using any other personal firewall software, see the User's Guide for your software or contact the software manufacturer.

Related Information

• Introduction to Your Brother Machine

Home > Introduction to Your Brother Machine > Control Panel Overview

Control Panel Overview

1.Near Field Communication (NFC) Reader (available only for certain models)

You can use card authentication by touching the IC card to the NFC Reader on the control panel.

If your Android™ device supports the NFC feature, you can print from your device or scan documents to your device in the same way.

2.Touchscreen Liquid Crystal Display (LCD)

Access menus and options by pressing them on the touchscreen.

3.Touchpanel

(Back)

Press to go back to the previous menu.

(Home)

•Press to return to the Home screen.

•While the machine is in Sleep Mode, the Home icon blinks.

(Cancel)

Press to cancel an operation (available when lit).

Dial Pad (Numerical buttons)

Press the numbers on the touchpanel to dial telephone or fax numbers and to enter the number of copies.

4. Power On/Off

•Turn on the machine by pressing .

•Turn off the machine by pressing and holding down . The LCD displays [Shutting Down] for a few seconds before going off. If you have an external telephone or TAD connected, it is always available.

5. (WiFi)

(For infrastructure mode)

When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access point.

(For Ad-Hoc mode)

The WiFi LED is always off.

Related Information

• Introduction to Your Brother Machine

Home > Introduction to Your Brother Machine > Touchscreen LCD Overview

Touchscreen LCD Overview

You can select from two types of screens to set the Home screen: Function screens and Shortcuts screen. When a Function screen is displayed, swipe left or right or press d or c to display the other Function screens.

The Home screen displays the machine’s status when the machine is idle. This screen is also called the Ready Mode screen. When displayed, this screen indicates that your machine is ready for the next command.

If Active Directory Authentication or LDAP Authentication is enabled, the machine's control panel will be locked. The available features vary depending on your model.

Function screens

The Function screens provide access to features, such as Fax, Copy and Scan.

Shortcuts screen

Create Shortcuts for frequently-used operations, such as sending a fax, copying, scanning and using Web Connect.

Eight Shortcuts tabs are available with six Shortcuts on each Shortcuts tab. A total of 48 Shortcuts are available.

1.Modes

• [Fax]

Press to access Fax mode.

• [Copy]

Press to access Copy mode.

• [Scan]

Press to access Scan mode.

• [Secure Print]

Press to access the [Secure Print] option.

• [Web]

Press to connect the Brother machine to an Internet service. For more detailed information, see the Web Connect Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to download the guide.

• [Apps]

Press to connect the Brother machine to the Brother Apps service. For more detailed information, see the Web Connect Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to download the guide.

•[USB]

Press to access the Direct Print and Scan to USB menus.

• [2 in 1 ID Copy]

Press to access the 2 in 1 ID Copy option.

2. or (Wireless Status)

Press to configure wireless settings.

If you are using a wireless connection, a four-level indicator displays the current wireless signal strength.

MAX

3.(Toner)

Displays the remaining toner life. Press to access the [Toner] menu.

4.(Settings)

Press to access the [Settings] menu.

If Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to change settings.

5.Date & Time

Displays the date and time set on the machine.

6. [Shortcuts]

Press to access the [Shortcuts] screen.

7. (Function screens)

Press to access the Function screens.

New Fax

When [Fax Preview] is set to [On], the number of new faxes you received into the memory appears at the top of the screen.

Warning icon

The warning icon appears when there is an error or maintenance message; press to view it, and then press to return to Ready Mode.

NOTE

This product adopts the font of ARPHIC TECHNOLOGY CO., LTD.

Related Information

• Introduction to Your Brother Machine

Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD

How to Navigate the Touchscreen LCD

Press your finger on the LCD to operate it. To display and access all the options, swipe left, right, up, down or press d c or a b on the LCD to scroll through them.

The following steps explain how to change a machine setting. In this example, the LCD Backlight setting is changed from [Light] to [Med].

IMPORTANT

DO NOT press the LCD with a sharp object, such as a pen or stylus. It may damage the machine.

NOTE

DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this may cause an error.

1.Press [Settings].

2.Press [All Settings].

3.Swipe up or down or press a or b to display the [General Setup] option, and then press [General

Setup].

4.Swipe up or down or press a or b to display the [LCD Settings] option, and then press [LCD

Settings].

5. Press [Backlight].

6. Press [Med].

7. Press .

Related Information

• Introduction to Your Brother Machine

Home > Introduction to Your Brother Machine > Settings Screen Overview

Settings Screen Overview

Press to view the current machine status on the LCD.

Use the Settings menu to access all of your Brother machine's settings.

The available features vary depending on your model.

1.Toner

•Displays the remaining toner life.

•Press to access the [Toner] menu.

2.Network (For wired network models)

•Press to set up a network connection.

•A four level indicator on the screen displays the current wireless signal strength if you are using a wireless connection.

3.Date & Time

Displays the date and time set on the machine. Press to access the [Date & Time] menu.

4.Screen Settings

Press to access the [Screen Settings] menu.

5.All Settings

Press to access a menu of all machine settings.

6.Tray Setting

Press to change the paper size and paper type settings.

7.Wi-Fi Direct (For wireless network models)

Press to set up a Wi-Fi Direct network connection.

Fax Preview (For MFC models without wireless network functionality)

•Display the Fax Preview status.

•Press to access the Fax Preview setting.

Beep Volume (For DCP models without wireless network functionality)

Press to access the volume setting.

Related Information

• Introduction to Your Brother Machine

Home > Introduction to Your Brother Machine > Setting the Home Screen

Setting the Home Screen

Set the Home screen to either [Basic Functions], [More1], [More2], [Shortcuts 1], [Shortcuts

2], [Shortcuts 3], [Shortcuts 4], [Shortcuts 5], [Shortcuts 6], [Shortcuts 7] or [Shortcuts 8].

When the machine is idle or you press , the touchscreen will return to the screen you set.

1.Press [Settings] > [Screen Settings] > [Home Screen].

2.Swipe up or down or press a or b to display the screen settings, and then press the setting you want.

3.Press .

The machine will go to your chosen Home screen.

Related Information

• Introduction to Your Brother Machine

Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows)

Access Brother Utilities (Windows)

Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on your computer.

1.Do one of the following:

•(Windows XP, Windows Vista, Windows 7, Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2)

Click (Start) > All Programs > Brother > Brother Utilities.

•(Windows 8 and Windows Server 2012)

Tap or click (Brother Utilities) either on the Start screen or the desktop.

•(Windows 8.1 and Windows Server 2012 R2)

Move your mouse to the lower left corner of the Start screen and click (if you are using a touchbased device, swipe up from the bottom of the Start screen to bring up the Apps screen).

When the Apps screen appears, tap or click (Brother Utilities).

2.Select your machine (where XXXX is the name of your model).

3. Choose the operation you want to use.

Related Information

•Introduction to Your Brother Machine

•Uninstall the Brother Software and Drivers (Windows)

Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) > Uninstall the Brother Software and Drivers (Windows)

Uninstall the Brother Software and Drivers (Windows)

1.Do one of the following:

•(Windows XP, Windows Vista, Windows 7, Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2)

Click (Start) > All Programs > Brother > Brother Utilities.

•(Windows 8 and Windows Server 2012)

Tap or click (Brother Utilities) either on the Start screen or the desktop.

•(Windows 8.1 and Windows Server 2012 R2)

Move your mouse to the lower left corner of the Start screen and click (if you are using a touchbased device, swipe up from the bottom of the Start screen to bring up the Apps screen).

When the Apps screen appears, tap or click (Brother Utilities).

2.Click the drop-down list, and then select your model name (if not already selected). Click Tools in the left navigation bar, and then click Uninstall.

Follow the instructions in the dialog box to uninstall the software and drivers.

Related Information

• Access Brother Utilities (Windows)

Home > Paper Handling

Paper Handling

•Load Paper

•Paper Settings

•Recommended Print Media

•Load Documents

•Unscannable and Unprintable Areas

•Using Special Paper

Home > Paper Handling > Load Paper

Load Paper

•Load and Print Using the Paper Tray

•Load and Print Using the Multi purpose Tray (MP Tray)

Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray

Load and Print Using the Paper Tray

•Load Plain Paper, Letterhead, Colored Paper, Thin Paper and Recycled Paper in the Paper Tray

•Load Thick Paper in the Paper Tray

•Printing Problems

•Error and Maintenance Messages

Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Plain Paper, Letterhead, Colored Paper, Thin Paper and Recycled Paper in the Paper Tray

Load Plain Paper, Letterhead, Colored Paper, Thin Paper and Recycled Paper in the Paper Tray

•If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper type settings if needed, following the LCD instructions.

•When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.

1.Pull the paper tray completely out of the machine.

2.Press and slide the paper guides to fit the paper.

Press the green release levers to slide the paper guides.

For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray or the release lever (2) in the back of the tray, and then pull out the back of the paper tray. (Legal and Folio size paper are not available in some regions.)

For trays with a release button:

For trays with a release lever:

3.Fan the stack of paper well.

4.Load paper in the paper tray with the printing surface face down.

When you use Letterhead or Preprinted paper, load the paper in the correct orientation as shown in the illustrations.

Paper Orientation for Letterhead and Preprinted Paper

For 1-sided printing

•face down

•top edge toward the front of the paper tray

For automatic 2-sided printing (long edge binding)

•face up

•bottom edge toward the front of the paper tray

• DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause the paper to jam or misfeed.

•When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by completing the following step:

-Press [Settings] > [All Settings] > [Printer] > [2-sided] > [Single Image] > [2-sided Feed].

5.Make sure the paper is below the maximum paper mark (b b b). Overfilling the paper tray will cause paper jams.

6.Slowly push the paper tray completely into the machine.

7.Lift the support flap to prevent paper from sliding off the output tray.

Related Information

• Load and Print Using the Paper Tray

Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Thick Paper in the Paper Tray

Load Thick Paper in the Paper Tray

•When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.

1.Pull the paper tray completely out of the machine.

2.Press and slide the paper guides to fit the paper.

Press the green release levers to slide the paper guides.

For trays with a release button:

For trays with a release lever:

3.Fan the stack of paper well.

4.Load paper in the paper tray with the printing surface face down.

DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause the paper to jam or misfeed.

5.Make sure the paper is below the maximum paper mark (b b b). Overfilling the paper tray will cause paper jams.

6.Slowly push the paper tray completely into the machine.

7.Open the machine's back cover (the face up output tray).

8. Open the paper stopper (available only for certain models).

9. Send your print job to the machine.

Change your print preferences in the Print dialog box before sending the print job from your computer.

10.Close the paper stopper (available only for certain models).

11.Close the back cover (the face up output tray) until it locks in the closed position.

Related Information

• Load and Print Using the Paper Tray

Home > Paper Handling > Load Paper > Load and Print Using the Multi purpose Tray (MP Tray)

Load and Print Using the Multi purpose Tray (MP Tray)

You can load up to ten envelopes, letterhead, colored paper, thin paper, thick paper, thicker paper, recycled paper, Bond paper, labels, or up to 50 sheets of plain paper in the MP tray.

•Load Paper in the Multi purpose Tray (MP Tray)

•Load and Print Thick Paper and Labels Using the MP Tray

•Load and Print on Envelopes Using the MP Tray

•Printing Problems

•Error and Maintenance Messages

Home > Paper Handling > Load Paper > Load and Print Using the Multi purpose Tray (MP Tray) > Load Paper in the Multi purpose Tray (MP Tray)

Load Paper in the Multi purpose Tray (MP Tray)

When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.

1. Lift the support flap to prevent paper from sliding off the face down output tray.

2. Open the MP tray and lower it gently.

3. Pull out the MP tray support (1) and unfold the flap (2).

4.Slide the MP tray paper guides to fit the width of the paper you are using. If the paper guide on the right side has a lever, press it and slide the paper guide.

5.Load paper with the printing surface face up in the MP tray. When you use Letterhead or Preprinted paper, load the paper in the correct orientation as shown in the illustrations.

Make sure the paper is below the maximum paper mark (1).

Paper Orientation for Letterhead and Preprinted Paper

For 1-sided printing

•face up

•top edge first

For automatic 2-sided printing (long edge binding)

•face down

•bottom edge first

When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by completing the following step:

•Press [Settings] > [All Settings] > [Printer] > [2-sided] > [Single Image] > [2- sided Feed].

Related Information

• Load and Print Using the Multi purpose Tray (MP Tray)

Home > Paper Handling > Load Paper > Load and Print Using the Multi purpose Tray (MP Tray) > Load and Print Thick Paper and Labels Using the MP Tray

Load and Print Thick Paper and Labels Using the MP Tray

When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP tray through to the back of the machine. Use this paper feed and output method when you print on thick paper or labels.

When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.

1. Open the machine's back cover (the face up output tray).

2. Open the paper stopper (available only for certain models).

3. On the front of the machine, open the MP tray and lower it gently.

4. Pull out the MP tray support (1) and unfold the flap (2).

5.Slide the MP tray paper guides to fit the width of the paper that you are using. If the paper guide on the right side has a lever, press it and slide the paper guide.

6. Load paper or labels in the MP tray.

• Make sure the paper is below the maximum paper mark (1).

•Load paper into the MP tray with the printing surface face up.

7.Send your print job to the machine.

Change your print preferences in the Print screen before sending the print job from your computer.

8.Close the paper stopper (available only for certain models).

9.Close the back cover (the face up output tray) until it locks in the closed position.

Related Information

• Load and Print Using the Multi purpose Tray (MP Tray)

Home > Paper Handling > Load Paper > Load and Print Using the Multi purpose Tray (MP Tray) > Load and Print on Envelopes Using the MP Tray

Load and Print on Envelopes Using the MP Tray

You can load up to ten envelopes in the MP tray.

Before loading, press the corners and sides of the envelopes to make them as flat as possible.

When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.

1. Open the machine's back cover (the face up output tray).

2. Open the paper stopper (available only for certain models).

3. On the front of the machine, open the MP tray and lower it gently.

4. Pull out the MP tray support (1) and unfold the flap (2).

5.Slide the MP tray paper guides to fit the width of the envelopes that you are using. If the paper guide on the right side has a lever, press it and slide the paper guide.

6. Load envelopes in the MP tray.

Load up to 10 envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1). Loading more than 10 envelopes may cause paper jams.

7. Send your print job to the machine.

Change your print preferences in the Print dialog box before sending the print job from your computer.

Settings		Options for Envelopes

Paper Size Com-10

Monarch

Media Type Envelopes

Env. Thick

Env. Thin

8.Close the paper stopper (available only for certain models).

9.Close the back cover (the face up output tray) until it locks in the closed position.

Related Information

• Load and Print Using the Multi purpose Tray (MP Tray)

Home > Paper Handling > Paper Settings

Paper Settings

•Change the Paper Size and Paper Type

•Select the Tray to Be Used For Printing

•Change the Check Paper Size Setting

Home > Paper Handling > Paper Settings > Change the Paper Size and Paper Type

Change the Paper Size and Paper Type

When you change the size and type of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time.

1.Press [Settings] > [All Settings] > [General Setup] > [Tray Setting] > [Paper Type].

2.Swipe up or down or press a or b to display the paper tray options, and then press the option you want.

3.Swipe up or down or press a or b to display the paper type options, and then press the option you want.

4.Press .

5.Swipe up or down or press a or b to display the [Paper Size] option, and then press [Paper Size].

6.Swipe up or down or press a or b to display the paper tray options, and then press the option you want.

7.Swipe up or down or press a or b to display the paper size options, and then press the option you want.

8.Press .

Related Information

• Paper Settings

Home > Paper Handling > Paper Settings > Select the Tray to Be Used For Printing

Select the Tray to Be Used For Printing

Change the default tray the machine will use for printing copies, received faxes, and print jobs from your computer.

DCP models do not support the fax feature.

1.Press [Settings] > [All Settings] > [General Setup] > [Tray Setting].

2.Swipe up or down or press a or b to display the [Tray Use: Copy], [Tray Use: Fax], or [Tray Use: Print] option, and then press the option you want.

3.Swipe up or down or press a or b to display the option you want, and then press it. For example, when you select the [MP>T1] option, the machine pulls paper from the MP tray until it is empty, and then from Tray 1.

4.Press .

• When you make a copy using the ADF and give priority to multiple trays, the machine looks for the tray with the most suitable paper and pulls paper from that tray.

•When you make a copy using the scanner glass, your document is copied from the higher priority tray even if more suitable paper is in another paper tray.

•(For models with facsimile function) Use the following sizes of paper for printing faxes: Letter, A4, Legal, Folio, Mexico Legal or India Legal. When an appropriate size is not in any of the trays, the machine stores received faxes and [Size Mismatch] appears on the touchscreen.

•(For models with facsimile function) If the tray is out of paper and received faxes are in the machine’s memory, [No Paper] appears on the touchscreen. Load paper in the empty tray.

Related Information

• Paper Settings

Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting

Change the Check Paper Size Setting

When you turn on your machine's Check Size setting, the machine displays a message when you remove a paper tray or load paper using the MP tray, asking if you changed the paper size and paper type.

The default setting is On.

1.Press [Settings] > [All Settings] > [General Setup] > [Tray Setting] > [Check Size].

2.Press [On] or [Off].

3.Press .

Related Information

• Paper Settings

Home > Paper Handling > Recommended Print Media

Recommended Print Media

To get the best print quality, we recommend using the paper listed in the table.

Paper Type	Item
Plain Paper	Xerox 4200DP 20 lb

	Hammermill Laser Print
	(24 lb = 90 g/m2)
Recycled Paper	No specific brand recommended

Labels	Avery laser labels white #5160

Envelopes	No specific brand recommended

Related Information

• Paper Handling

Home > Paper Handling > Load Documents

Load Documents

You can send a fax, make copies and scan from the Automatic Document Feeder (ADF) and from the scanner glass.

•Load Documents in the Automatic Document Feeder (ADF)

•Load Documents on the Scanner Glass

Home > Paper Handling > Load Documents > Load Documents in the Automatic Document Feeder (ADF)

Load Documents in the Automatic Document Feeder (ADF)

Use the ADF when copying or scanning multiple-page, standard-sized documents.

•The ADF can hold the following pages and feed each sheet individually:

-(DCP-L5500DN) up to 40 pages

-(MFC-L5700DW/MFC-L5705DW) up to 50 pages

-(DCP-L5600DN/DCP-L5650DN/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW) up to 70 pages

-(MFC-L6800DW) up to 80 pages

•Use standard 20 lb (80 g/m2) paper.

•Make sure documents with correction fluid or written in ink are completely dry.

IMPORTANT

•DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.

•DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted, or taped.

•DO NOT use cardboard, newspaper, or fabric.

•To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Document Sizes Supported

Length:	5.8 to 14.0 in. (147.3 to 355.6 mm)

Width:	4.1 in. to 8.5 in. (105 mm to 215.9 mm)

Weight:	17 to 24 lb (64 to 90 g/m2)

1. Unfold the ADF document output support flap.

2.Fan the pages well.

3.Stagger the pages of your document and load it face up and top edge first, into the ADF as shown in the illustration.

4. Adjust the paper guides to fit the width of your document.

Related Information

• Load Documents

Home > Paper Handling > Load Documents > Load Documents on the Scanner Glass

Load Documents on the Scanner Glass

Use the scanner glass to fax, copy, or scan one page at a time.

Document Sizes Supported

	• (DCP-L5500DN/MFC-L5700DW/MFC-L5705DW)
	Up to 11.8 in. (300 mm)
Length:	• (DCP-L5600DN/DCP-L5650DN/MFC-L5800DW/MFC-L5850DW/
	MFC-L5900DW/MFC-L6700DW/MFC-L6800DW)
	Up to 14 in. (355.6 mm)

Width:	Up to 8.5 in. (215.9 mm)

Weight:	Up to 4.4 lb (2 kg)

To use the scanner glass, the ADF must be empty.

1.Lift the document cover.

2.Place the document on the scanner glass face down.

3. Place the corner of the page in the upper left corner of the scanner glass.

4.Close the document cover.

If the document is a book or is thick, gently press on the document cover.

Related Information

• Load Documents

Home > Paper Handling > Unscannable and Unprintable Areas

Unscannable and Unprintable Areas

The figures in the table show maximum unscannable and unprintable areas from the edges of the most commonly-used paper sizes. These measurements may vary depending on the paper size or settings in the application you are using.

2 4

Do not attempt to scan, copy, or print into these areas; your output will not reflect anything in these areas.

Usage	Document Size	Top (1)	Left (2)
		Bottom (3)	Right (4)
Fax (Sending)	Letter, Legal	0.12 in. (3 mm)	0.16 in. (4 mm)

	A4	0.12 in. (3 mm)	(ADF)
			0.04 in. (1 mm)
			(Scanner Glass)
			0.12 in. (3 mm)

Copy 1	Letter, Legal	0.16 in. (4 mm)	0.16 in. (4 mm)
	A4	0.16 in. (4 mm)	0.12 in. (3 mm)

Scan	Letter	0.12 in. (3 mm)	0.12 in. (3 mm)

	A4	0.12 in. (3 mm)	Approximately 0.12 in. (3
			mm)

	Legal	Approximately 0.12 in. (3	Approximately 0.12 in. (3
		mm)	mm)

Print	Letter, Legal	0.16 in. (4.2 mm)	0.16 in. (4.2 mm)

	A4	0.16 in. (4.2 mm)	0.16 in. (4.2 mm)

Related Information

•Paper Handling

Related Topics:

•Printing Problems

1a single copy or a 1 in 1 copy

Home > Paper Handling > Using Special Paper

Using Special Paper

Always test paper samples before purchasing them to ensure desirable performance.

•DO NOT use inkjet paper; it may cause a paper jam or damage your machine.

•If you use bond paper, paper with a rough surface, or paper that is wrinkled or creased, the paper may exhibit degraded performance.

Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.

IMPORTANT

Some types of paper may not perform well or may cause damage to your machine.

DO NOT use paper:

•that is highly textured

•that is extremely smooth or shiny

•that is curled or warped

•that is coated or has a chemical finish

•that is damaged, creased or folded

•that exceeds the recommended weight specification in this guide

•with tabs and staples

•with letterheads using low temperature dyes or thermography

•that is multipart or carbonless

•that is designed for inkjet printing

If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement.

Related Information

• Paper Handling

Home > Print

Print

•Print from Your Computer (Windows)

•Print from Your Computer (Mac)

•Print One Page Duplicates on Different Types of Paper

•Cancel a Print Job

•Test Print

Home > Print > Print from Your Computer (Windows)

Print from Your Computer (Windows)

•Print a Document (Windows)

•Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)

•Print as a Poster (Windows)

•Print on Both Sides of the Paper (Windows)

•Print as a Booklet (Windows)

•Secure Print (Windows)

•Use a Macro from Your Computer (Windows)

•Use a Preset Print Profile (Windows)

•Change the Default Print Settings (Windows)

•Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language

Emulation) (Windows)

•Monitor the Status of the Machine from Your Computer (Windows)

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Print a Document (Windows)

Print a Document (Windows)

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Make sure you have loaded the correct size paper in the paper tray.

4.Click the Paper Size drop-down list, and then select your paper size.

5.In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.

If your application contains a similar setting, we recommend that you set the orientation using the application.

6.Type the number of copies (1-999) you want in the Copies field.

7.Click the Media Type drop-down list, and then select the type of paper you are using.

8.To print multiple pages on a single sheet of paper or print one page of your document on multiple sheets, click the Multiple Page drop-down list, and then select your options.

9.Change other printer settings if needed.

10.Click OK.

11.Complete your print operation.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)

Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.

If your application contains a similar setting, we recommend that you set the orientation using the application.

4.Click the Multiple Page drop-down list, and then select the 2 in 1, 4 in 1, 9 in 1, 16 in 1, or 25 in 1 option.

5.Click the Page Order drop-down list, and then select your page order.

6.Click the Border Line drop-down list, and then select your border line type.

7.Change other printer settings if needed.

8.Click OK.

9.Complete your print operation.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Print as a Poster (Windows)

Print as a Poster (Windows)

Enlarge your print size and print the document in poster mode.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Click the Multiple Page drop-down list, and then select the 1 in 2x2 Pages, 1 in 3x3 Pages, 1 in 4x4 Pages, or 1 in 5x5 Pages option.

4.Select the Print cut-out line check box, if needed.

Print cut-out line

Prints a faint cut-out line around the printable area so that you can easily cut it out.

5.Change other printer settings if needed.

6.Click OK.

7.Complete your print operation.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Print on Both Sides of the Paper (Windows)

Print on Both Sides of the Paper (Windows)

•Select Letter, Legal, Mexico Legal, India Legal or Folio sized paper when using the automatic 2-sided printing function.

•Make sure the back cover is closed.

•If paper is curled, straighten it and put it back in the paper tray.

•Use regular paper or thin paper. DO NOT use bond paper.

•If the paper is too thin, it may wrinkle.

•When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print quality.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.

If your application contains a similar setting, we recommend that you set the orientation using the application.

4. Click the 2-sided / Booklet drop-down list, and then select the 2-sided or 2-sided (Manual) option.

Option		Description
2-sided(available only for		Automatically prints on both sides of the paper.
certain models)

2-sided (Manual)		The machine prints all the even-numbered pages on one side of the paper
		first. Then, the printer driver instructs you (with a pop-up message) to
		reinsert the paper.

5.Click the 2-sided Settings button.

6.Select one of the options from the 2-sided Type menu.

When 2-sided is selected, four types of 2-sided binding are available for each orientation:

Option for Portrait		Description
Long Edge (Left)

Long Edge (Right)

Short Edge (Top)

Short Edge (Bottom)

Option for Landscape Description Long Edge (Top)

Long Edge (Bottom)

Option for Landscape Description

Short Edge (Right)

Short Edge (Left)

7.Select the Binding Offset check box if you want to specify the offset for binding in inches or millimeters.

8.Click OK.

9.Change other printer settings if needed.

10.Do one of the following:

•For automatic 2-sided printing, click OK again, and then complete your print operation.

•For manual 2-sided printing, click OK again and follow the on-screen instructions.

If the paper is not feeding correctly, it may be curled. Remove the paper, straighten it, and put it back in the paper tray.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Print as a Booklet (Windows)

Print as a Booklet (Windows)

Use this option to print a document in booklet format using 2-sided printing. The document's pages will be arranged according to the correct page number and will allow you to fold the print output at the center, without having to change the order of the printed pages.

•Select Letter, Legal, Mexico Legal, India Legal or Folio sized paper when using the automatic 2-sided printing function.

•Make sure the back cover is closed.

•If paper is curled, straighten it and put it back in the paper tray.

•Use regular paper or thin paper. DO NOT use bond paper.

•If the paper is too thin, it may wrinkle.

•When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print quality.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.

If your application contains a similar setting, we recommend that you set the orientation using the application.

4. Click the 2-sided / Booklet drop-down list, and then select the Booklet or Booklet (Manual) option.

Option		Description
Booklet (available only for certain models)		Automatically prints as a booklet.

Booklet (Manual)		Manually prints as a booklet.

5.Click the 2-sided Settings button.

6.Select one of the options from the 2-sided Type menu.

There are two types of 2-sided binding directions available for each orientation:

Option for Portrait Description

Left Binding

Right Binding

Option for Landscape Description

Top Binding

Bottom Binding

7. Select one of the options from the Booklet Printing Method menu.

Option Description

All Pages at Every page will be printed in booklet format (four pages to every piece of paper, two pages Once per side). Fold your printout in the center to create the booklet.

Divide into This option prints the whole booklet in smaller individual booklet sets, allowing you to fold at Sets the center of the smaller individual booklet sets without having to change the order of the

printed pages. You can specify the number of sheets in each smaller booklet set (from 1-15). This option can be helpful when folding a printed booklet that has a large number of pages.

8.Select the Binding Offset check box if you want to specify the offset for binding in inches or millimeters.

9.Click OK.

10.Change other printer settings if needed.

11.Do one of the following:

•For automatic booklet printing, click OK again, and then complete your print operation.

•For manual booklet printing, click OK again and follow the on-screen instructions.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Secure Print (Windows)

Secure Print (Windows)

Use Secure Print to ensure that confidential or sensitive documents do not print until you enter a password on the machine's control panel.

•The secure data is deleted from the machine when you turn off the machine.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Click the Advanced tab.

4.Click the Settings button in the Secure Print field.

5.Select the Secure Print check box.

6.Type your four-digit password in the Password field, and then click OK.

You must set a separate password for each document.

7.Click OK.

8.Complete your print operation.

9.On the machine's control panel, swipe left or right or press d or c to display the [Secure Print] option, and then press [Secure Print].

10.Swipe up or down or press a or b to display user names, and then press your user name. The LCD displays the list of secured jobs for your name.

11.Swipe up or down or press a or b to display the print job, and then press it.

12.Enter your four-digit password, and then press [OK].

13.Enter the number of copies you want.

14.Press [Start].

The machine prints the data.

After you print the secured data, it will be cleared from the machine's memory.

Related Information

• Print from Your Computer (Windows)

Home > Print > Print from Your Computer (Windows) > Use a Macro from Your Computer (Windows)

Use a Macro from Your Computer (Windows)

If you have stored the electronic forms (macros) in your machine's memory, you can use the macro to print the data as an overlay on the print job you want.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Click the Advanced tab.

4.Click the Other Print Options button.

5.Select Macro.

6.Click the Macro Settings button.

7.Enter Macro ID and Macro Name you want to use.

8.Select Insert Macro Command.

9.Select the page to overlay the macro data.

Option

All Pages

Page

Add to Top of Page

Add to End of Page

Description

Lets you insert the macro onto all pages.

Lets you insert the macro onto a specific page. Select this option, and then enter a page number within the range 1 to 255.

Send the macro data to the top of the page.

Send the macro data to the bottom of the page.

When Booklet has been selected, the Page setting in Insert Macro Command is disabled.

10.Click OK.

11.Click OK to return to the printer driver window.

12.Click OK.

13.Complete your print operation.

The macro data is printed as an overlay.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print One Page Duplicates on Different Types of Paper

Brother DCP-L5500DN, DCP-L5600DN, DCP-L5650DN, MFC-L5700DW, MFC-L5705DW User's Guide

Home > Print > Print from Your Computer (Windows) > Use a Preset Print Profile (Windows)

Use a Preset Print Profile (Windows)

Print Profiles are presets designed to give you quick access to frequently-used printing configurations.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Click the Print Profiles tab.

4.Select your profile from the print profile list.

The profile settings are shown on the left side of the printer driver window.

5.Do one of the following:

•If the settings are correct for your print job, click OK.

•To change the settings, go back to the Basic or Advanced tab, change settings, and then click OK.

To display the Print Profiles tab at the front of the window the next time you print, select the Always show Print Profiles tab first. check box.

Related Information

• Print from Your Computer (Windows)

• Create or Delete Your Print Profile (Windows)

Related Topics:

• Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Use a Preset Print Profile (Windows) > Create or Delete Your Print Profile (Windows)

Create or Delete Your Print Profile (Windows)

Add up to 20 new print profiles with customized settings.

1.Select the print command in your application.

2.Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Click the Basic tab and the Advanced tab, and configure the print settings you want for the new Print Profile.

4.Click the Print Profiles tab.

5.Do one of the following:

To create a new print profile:

a.Click Add Profile.

The Add Profile dialog box appears.

b.Type the new profile name in the Name field.

c.Click the icon you want to use to represent this profile from the icon list.

d.Click OK.

The new Print Profile name is added to the list in the Print Profiles tab.

To delete a print profile that you created:

a.Click Delete Profile.

The Delete Profile dialog box appears.

b.Select the profile you want to delete.

c.Click Delete.

d.Click Yes.

e.Click Close.

Related Information

• Use a Preset Print Profile (Windows)

Home > Print > Print from Your Computer (Windows) > Change the Default Print Settings (Windows)

Change the Default Print Settings (Windows)

When you change print settings from within a program, the changes apply only to the items you are printing in that program, at that time. To select print settings to use for all of your Windows programs, all the time, use these steps to change the default print settings.

1.Do one of the following:

•(For Windows XP and Windows Server 2003) Click Start > Printers and Faxes.

•(For Windows Vista and Windows Server 2008)

Click (Start) > Control Panel > Hardware and Sound > Printers.

•(For Windows 7 and Windows Server 2008 R2) Click (Start) > Devices and Printers.

•(For Windows 8)

Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware and Sound group, click View devices and printers.

•(For Windows Server 2012)

Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware group, click View devices and printers.

•(For Windows Server 2012 R2)

Click Control Panel on the Start screen. In the Hardware group, click View devices and printers.

2.Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.

3.Click the General tab, and then click the Printing Preferences... or Preferences... button. The printer driver dialog box appears.

• To configure the tray settings, click the Device Settings tab.

•To change the printer port, click the Ports tab.

4.Select the print settings you want to use as defaults for all of your Windows programs.

5.Click OK.

6.Close the printer properties dialog box.

Related Information

•Print from Your Computer (Windows)

•Configure the Optional Tray Settings (Windows)

Related Topics:

•Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Change the Default Print Settings (Windows) > Configure the Optional Tray Settings (Windows)

Configure the Optional Tray Settings (Windows)

Access your machine's Properties to auto-detect your machine's Optional Tray and serial number.

The printer driver automatically detects the Optional Tray during the driver installation. If you added the Optional Tray after the driver installation, follow these steps.

1.Do one of the following:

•(For Windows XP and Windows Server 2003) Click Start > Printers and Faxes.

•(For Windows Vista and Windows Server 2008)

Click (Start) > Control Panel > Hardware and Sound > Printers.

•(For Windows 7 and Windows Server 2008 R2) Click (Start) > Devices and Printers.

•(For Windows 8)

Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware and Sound group, click View devices and printers.

•(For Windows Server 2012)

Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware group, click View devices and printers.

•(For Windows Server 2012 R2)

Click Control Panel on the Start screen. In the Hardware group, click View devices and printers.

2.Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.

3.Select the Device Settings tab.

4.Click the Auto Detect button.

The Optional Tray and the machine's serial number are automatically detected.

5.Click the Apply button.

The Auto Detect function is not available under the following machine conditions:

•The machine power switch is off.

•The machine is in an error state.

•The machine is in a network shared environment.

•The cable is not connected to the machine correctly.

Related Information

• Change the Default Print Settings (Windows)

Home > Print > Print from Your Computer (Windows) > Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows)

Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows)

The BR-Script3 printer driver lets you print PostScript® data more clearly.

To install the PS driver (BR-Script3 printer driver), launch Brother's installation CD-ROM, select Custom in Select Machine section, and then check PS Driver check box.

1.Select the print command in your application.

2.Select Brother XXX-XXXX BR-Script3 (where XXXX is the name of your model), and then click the printing properties or preferences button.

The printer driver window appears.

3.Click the Layout, Paper/Quality, or Secure Print tab to change basic print settings.

Click the Layout or Paper/Quality tab, and then click the Advanced... button to change advanced print settings.

4.Click OK.

5.Complete your print operation.

Related Information

• Print from Your Computer (Windows)

Home > Print > Print from Your Computer (Windows) > Monitor the Status of the Machine from Your Computer (Windows)

Monitor the Status of the Machine from Your Computer (Windows)

The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of errors.

•To display the Status Monitor icon on your task tray, click the button. The (Status Monitor) icon will appear in the small window. Drag the icon to the task tray.

•Do one of the following:

-Double-click the icon in the task tray.

-(Windows XP, Windows Vista and Windows 7)

Click (Start) > All Programs > Brother > Brother Utilities.

Click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar, and then click Status Monitor.

-(Windows 8)

Click (Brother Utilities), and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar, and then click Status Monitor.

-(Windows 8.1)

Move your mouse to the lower left corner of the Start screen and click (if you are using a touchbased device, swipe up from bottom of the Start screen to bring up the Apps screen). When the Apps

screen appears, tap or click (Brother Utilities), and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar, and then click Status Monitor.

Troubleshooting

Click the Troubleshooting button to access the troubleshooting website.

Visit the Genuine Supplies website

Click the Visit the Genuine Supplies website button for more information on Brother genuine supplies.

When you enable Status Monitor, if you selected Automatic Firmware Update during installation, this feature will detect and download any updates for your machine.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Printing Problems

Home > Print > Print from Your Computer (Windows) > Print Settings (Windows)

Print Settings (Windows)

Basic Tab

1.Paper Size

Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.

2.Orientation

Select the orientation (portrait or landscape) of your printout.

If your application contains a similar setting, we recommend that you set the orientation using the application.

3.Copies

Type the number of copies (1-999) that you want to print in this field.

Collate

Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose. If this option is not selected, then each page will print according to the number of copies chosen before the next page of the document is printed.

4.Media Type

Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type.

5.Resolution

Select the print resolution. As print resolution and speed are related, the higher the resolution, the longer it will take to print the document.

6.Print Settings

Select the type of document you want to print.

Manual Settings...

Specify advanced settings such as brightness, contrast, and other settings.

Graphics

Use Printer Halftone

Select this option to use the printer driver to express halftones.

Brightness

Specify the brightness.

Contrast

Specify the contrast.

Graphics Quality

Select either Graphics or Text for the best print quality, based on the type of document you are printing.

Improve Gray Printing

Select this option to improve the image quality of shaded areas.

Improve Pattern Printing

Select this option to improve the pattern printing if printed fills and patterns are different from the fills and patterns you see on your computer screen.

Improve Thin Line

Select this option to improve the image quality of thin lines.

Use System Halftone

Select this option to use Windows to express halftones.

TrueType Mode

Mode

Select how the fonts are processed for printing.

Use Printer TrueType Fonts

Select whether to use built-in fonts for the font processing.

7.Multiple Page

Select this option to print multiple pages on a single sheet of paper or print one page of your document on multiple sheets.

Page Order

Select the page order when printing multiple pages on a single sheet of paper.

Border Line

Select the type of border to use when printing multiple pages on a single sheet of paper.

8.2-sided / Booklet

Select this option to print on both sides of the paper or print a document in booklet format using 2-sided printing.

2-sided Settings button

Click this button to select the type of 2-sided binding. Four types of 2-sided bindings are available for each orientation.

9.Paper Source

Select the paper source setting according to your print conditions or purpose.

First Page

Select the paper source to use for printing the first page.

Other Pages

Select the paper source to use for printing the second and subsequent pages.

Advanced Tab

1.Scaling

Select these options to enlarge or reduce the size of the pages in your document.

Fit to Paper Size

Select this option to enlarge or reduce the document pages to fit a specified paper size. When you select this option, select the paper size you want from the drop-down list.

Free

Select this option to enlarge or reduce the document pages manually. When you select this option, type a value into the field.

2.Reverse Print

Select this option to rotate the printed image 180 degrees.

3.Use Watermark

Select this option to print a logo or text on your document as a watermark. Select one of the preset watermarks, add a new watermark, or use an image file you have created.

4.Header-Footer Print

Select this option to print the date, time and PC login user name on the document.

5.Toner Save Mode

Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but are still legible.

6.Secure Print

This feature ensures that confidential or sensitive documents do not print until you enter a password on the machine's control panel.

7.Administrator

This feature allows you to change the administrator password and restrict various printing functions.

8.User Authentication

This feature allows you to confirm the restrictions for each user.

9.Other Print Options button

Macro

Select this feature to print an electronic form (macro), which you have stored in your machine's memory, as an overlay on the print job.

Density Adjustment

Specify the print density.

Improve Print Output

Select this option to reduce the amount of paper curling and improve the toner fixing.

Skip Blank Page

Select this option to allow the printer driver to automatically detect blank pages and exclude them from printing.

Print Text in Black

Select this option when you want to print color text in black.

Print Archive

Select this option to save the print data as a PDF file to your computer.

Eco settings

Select this option to reduce printing noise.

Related Information

•Print from Your Computer (Windows)

Related Topics:

•Print a Document (Windows)

•Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)

•Print as a Poster (Windows)

•Print on Both Sides of the Paper (Windows)

•Print as a Booklet (Windows)

•Use a Preset Print Profile (Windows)

•Change the Default Print Settings (Windows)

Home > Print > Print from Your Computer (Mac)

Print from Your Computer (Mac)

•Print a Document (Mac)

•Print on Both Sides of the Paper (Mac)

•Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)

•Secure Print (Mac)

•Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac)

•Monitor the Status of the Machine from Your Computer (Mac)

•Print Options (Mac)

Home > Print > Print from Your Computer (Mac) > Print a Document (Mac)

Print a Document (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

1.Make sure you have loaded the correct size paper in the paper tray.

2.From an application, such as Apple TextEdit, click the File menu, and then select Print.

3.Select Brother XXX-XXXX (where XXXX is your model name).

4.Type the number of copies you want in the Copies field.

5.Click the Paper Size pop-up menu, and then select your paper size.

6.Select the Orientation option that matches the way you want the document to print.

7.Click the application pop-up menu, and then select Print Settings. The Print Settings options appear.

8.Click the Media Type pop-up menu, and then select the type of paper you are using.

9.Change other printer settings, if needed.

10.Click Print.

Related Information

•Print from Your Computer (Mac)

Related Topics:

•Print Options (Mac)

Home > Print > Print from Your Computer (Mac) > Print on Both Sides of the Paper (Mac)

Print on Both Sides of the Paper (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

•Select Letter, Legal, Mexico Legal, India Legal or Folio sized paper when using the automatic 2-sided printing function.

•Make sure the back cover is closed.

•If paper is curled, straighten it and put it back in the paper tray.

•Use regular paper or thin paper. DO NOT use bond paper.

•If the paper is too thin, it may wrinkle.

•When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print quality.

1.From an application, such as Apple TextEdit, click the File menu, and then select Print.

2.Select Brother XXX-XXXX (where XXXX is your model name).

3.Select the Orientation option that matches the way you want the document to print.

4.For automatic 2-sided printing, do the following:

a.Click the application pop-up menu, and then select Layout. The Layout setting options appear.

b.In the Two-Sided section, select the Short-Edge binding or Long-Edge binding option.

c.Change other printer settings, if needed.

d.Click Print.

5.For manual 2-sided printing, do the following:

a.Click the application pop-up menu, and then select Paper Handling. The Paper Handling options appear.

b.In the Pages to Print pop-up menu, select Even Only.

c.Change other print settings, if needed.

d.Click the Print button.

e.After the machine prints the even-numbered pages, remove the printed pages from the output paper tray.

f.Make sure the pages are completely flat, and put the paper back in the tray, blank side facing down.

g.Repeat steps 1-3, selecting the same printer and settings you used to print the even-numbered pages.

h.Click the application pop-up menu, and then select Paper Handling. The Paper Handling options appear.

i.In the Pages to Print pop-up menu, select Odd Only.

j.Click Print.

Related Information

•Print from Your Computer (Mac)

Related Topics:

•Print Options (Mac)

Home > Print > Print from Your Computer (Mac) > Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)

Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

1.From an application, such as Apple TextEdit, click the File menu, and then select Print.

2.Select Brother XXX-XXXX (where XXXX is your model name).

3.Click the application pop-up menu, and then select Layout. The Layout setting options appear.

4.Click the Pages per Sheet pop-up menu, and then select the number of pages to print on each sheet.

5.Select the Layout Direction option.

6.Click the Border pop-up menu, and then select your border line type.

7.Change other printer settings if needed.

8.Click Print.

Related Information

•Print from Your Computer (Mac)

Related Topics:

•Print Options (Mac)

Home > Print > Print from Your Computer (Mac) > Secure Print (Mac)

Secure Print (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

Use Secure Print to ensure that confidential or sensitive documents do not print until you enter a password on the machine's control panel.

•The secure data is deleted from the machine when you turn off the machine.

1.From an application, such as Apple TextEdit, click the File menu, and then select Print.

2.Select Brother XXX-XXXX (where XXXX is your model name).

3.Click the application pop-up menu, and then select the Secure Print option. The Secure Print options appear.

4.Select the Secure Print check box.

5.Type your user name, job name and a four-digit password.

6.Click Print.

7.On the machine's control panel, swipe left or right or press d or c to display the [Secure Print] option, and then press [Secure Print].

8.Swipe up or down or press a or b to display user names, and then press your user name. The LCD displays the list of secured jobs for your name.

9.Swipe up or down or press a or b to display the print job, and then press it.

10.Enter your four-digit password, and then press [OK].

11.Enter the number of copies you want.

12.Press [Start].

The machine prints the data.

After you print the secured data, it will be cleared from the machine's memory.

Related Information

• Print from Your Computer (Mac)

Home > Print > Print from Your Computer (Mac) > Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac)

Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

The BR-Script3 printer driver lets you print PostScript® data more clearly.

•Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the PS driver (BR-Script3 printer driver).

•Make sure you have added the BR-Script3 printer driver from Print & Scan or Printers & Scanners in the

System Preferences list on your Mac.

1.Make sure you have loaded the correct size paper in the paper tray.

2.From an application, such as Apple TextEdit, click the File menu, and then select Print.

3.Select your machine.

4.Type the number of copies you want in the Copies field.

5.Click the Paper Size pop-up menu, and then select your paper size.

6.Select the Orientation option that matches the way you want the document to print.

7.Click the print options pop-up menu, and then click Printer Features. The Printer Features options appear.

8.Click the Print Quality pop-up menu, and then select the resolution.

9.Click the Media Type pop-up menu, and then select the type of paper you are using.

10.Change other printer settings, if needed.

11.Click Print.

Related Information

• Print from Your Computer (Mac)

Home > Print > Print from Your Computer (Mac) > Monitor the Status of the Machine from Your Computer (Mac)

Monitor the Status of the Machine from Your Computer (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

The Status Monitor utility is a configurable software tool for monitoring the status of a device, allowing you to get immediate notification of error messages, such as paper empty or paper jam, at preset update intervals. You can also access Web Based Management.

1.Click the System Preferences menu, select Print & Scan or Printers & Scanners, and then select your machine.

2.Click the Options & Supplies button.

3.Click the Utility tab, and then click the Open Printer Utility button. Status Monitor starts.

Troubleshooting

Click the Troubleshooting button to access the troubleshooting website.

Visit the Genuine Supplies website

Click the Visit the Genuine Supplies website button for more information on Brother genuine supplies.

Updating the machine's status

To view the latest machine status while the Status Monitor window is open, click the icon. You can set

the interval at which the software updates machine status information. Click Brother Status Monitor in the menu bar, and then select Preferences.

Web Based Management (Network Connection Only)

Access the Web Based Management System by clicking the machine icon on the Status Monitor screen. You can use a standard Web Browser to manage your machine using HTTP (Hyper Text Transfer Protocol).

Related Information

•Print from Your Computer (Mac)

Related Topics:

•Printing Problems

Home > Print > Print from Your Computer (Mac) > Print Options (Mac)

Print Options (Mac)

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/

MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW

Page Setup

1.Paper Size

Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.

2.Orientation

Select the orientation (portrait or landscape) of your printout.

If your application contains a similar setting, we recommend that you set the orientation using the application.

3.Scale

Type a value into the field to enlarge or reduce the pages in your document to fit the selected paper size.

Layout

1.Pages per Sheet

Select the number of pages to print on a single sheet of paper.

2.Layout Direction

Select the page order when printing multiple pages on a single sheet of paper.

3.Border

Select the type of border to use when printing multiple pages on a single sheet of paper.

4.Two-Sided (available only for certain models)

Select whether to print on both sides of the paper.

5.Reverse page orientation

Select this option to rotate the printed image 180 degrees.

6.Flip horizontally

Select this option to reverse the printed image on the page horizontally from left to right.

Paper Handling

1.Collate pages

2.Pages to Print

Select which pages you want to print (even pages or odd pages).

3.Page Order

Select the page order.

4.Scale to fit paper size

Select this option to enlarge or reduce the pages in your document to fit the selected paper size.

5.Destination Paper Size

Select the paper size to print on.

6.Scale down only

Select this option if you want to reduce the pages in your document when they are too large for the selected paper size. If this option is selected and the document is formatted for a paper size that is smaller than the paper size you are using, the document will be printed at its original size.

Print Settings

1.Media Type

Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type.

2.Print Quality

Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document.

3.Paper Source

Select the paper source setting according to your print conditions or purpose.

4.Advanced

Toner Save Mode

Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but are still legible.

Graphics Quality

Select either Graphics or Text for the best print quality, based on the type of document you are printing.

Improve Print Output

Select this option to reduce the amount of paper curling and improve the toner fixing.

Density Adjustment

Specify the print density.

Quiet Mode

Select this option to reduce printing noise.

Other Print Options

Skip Blank Page

Select this option to allow the printer driver to automatically detect blank pages and exclude them from printing.

Secure Print

1.Secure Print

This feature ensures that confidential or sensitive documents do not print until you enter a password on the machine's control panel.

Related Information

•Print from Your Computer (Mac)

Related Topics:

•Print a Document (Mac)

•Print on Both Sides of the Paper (Mac)

•Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)

Home > Print > Print One Page Duplicates on Different Types of Paper

Print One Page Duplicates on Different Types of Paper

Use the Carbon Copy function to make multiple copies of the same print data, as if printing on carbon paper. Send the data to individual paper trays that you pre-loaded with different paper types or colors.

For example, you may want to set the machine to send your print data to Tray1, which you have pre-loaded with blue colored paper, and then reprint the data in a certain location on the page from the MP Tray, which you have pre-loaded with yellow colored paper that already contains text.

If you load blue paper in Tray 1 and yellow paper in the MP tray, the printer will automatically feed paper for Sheet 1 from Tray 1 and Sheet 2 from the MP Tray.

If you enable the Carbon Copy function, the machine will always make copies automatically.

(Windows)

The carbon copy function also allows you to select a different printing macro for each page.

1.Press [Settings] > [All Settings] > [Printer] > [Carbon Menu] > [Carbon Copy] > [On].

2.Swipe up or down or press a or b to display the [Copies] option, and then press the [Copies] option.

3.Enter the number of copies you want, and then press [OK].

4.Swipe up or down or press a or b to display the [Copy1 Tray] option, and then press the [Copy1 Tray] option.

5.Swipe up or down or press a or b to display the paper tray you want to configure the [Copy1 Tray] option, and then press the paper tray.

(Windows)

a.Swipe up or down or press a or b to display the [Copy1 Macro] option, and then press the [Copy1 Macro] option.

b.Swipe up or down or press a or b to display the ID number of macro you want to use, and then press it.

6.Repeat these steps until you have selected all the tray settings for each copy.

7.Send your print job to the machine.

Related Information

• Print

Related Topics:

• Use a Macro from Your Computer (Windows)

Home > Print > Cancel a Print Job

Cancel a Print Job

1. Press .

To cancel multiple print jobs, press and hold for about four seconds.

Related Information

• Print

Related Topics:

• Printing Problems

Home > Print > Test Print

Test Print

If there are problems with print quality, follow these instructions to do a test print.

1.Press [Settings] > [All Settings] > [Printer] > [Print Options] > [Test Print] >

[Yes].

2.Press .

Related Information

• Print

Related Topics:

• Improve the Print Quality

Home > Scan

Scan

•Scan Using the Scan Button on Your Brother Machine

•Scan from Your Computer (Windows)

•Scan from Your Computer (Mac)

•Configure Scan Settings Using Web Based Management

Home > Scan > Scan Using the Scan Button on Your Brother Machine

Scan Using the Scan Button on Your Brother Machine

•Scan Photos and Graphics

•Save Scanned Data to a Folder as a PDF File

•Save Scanned Data to a USB Flash Drive

•Scan to an Editable Text File (OCR)

•Scan to Email Attachment

•Send Scanned Data to an Email Server

•Scan to FTP

•Scan to SSH FTP (SFTP)

•Scan to Network (Windows)

•Scan to SharePoint

•Web Services for Scanning on Your Network (Windows Vista SP2 or greater, Windows 7 and Windows 8)

•Change Scan Button Settings from ControlCenter4 (Windows)

•Change Scan Button Settings from ControlCenter2 (Mac)

•Change Scan Button Settings from Brother iPrint&Scan

•Configure Certificate for Signed PDF

•Disable Scanning from Your Computer

Brother DCP-L5500DN, DCP-L5600DN, DCP-L5650DN, MFC-L5700DW, MFC-L5705DW User's Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Before You Use Your Brother Machine

Applicable Models

Definitions of Notes

Notice - Disclaimer of Warranties (USA and Canada)

Trademarks

Important Note

Introduction to Your Brother Machine

Before Using Your Machine

Control Panel Overview

Touchscreen LCD Overview

How to Navigate the Touchscreen LCD

Settings Screen Overview

Setting the Home Screen

Access Brother Utilities (Windows)

Uninstall the Brother Software and Drivers (Windows)

Paper Handling

Load Paper

Load and Print Using the Paper Tray

Load Plain Paper, Letterhead, Colored Paper, Thin Paper and Recycled Paper in the Paper Tray

Load Thick Paper in the Paper Tray

Load and Print Thick Paper and Labels Using the MP Tray

Load and Print on Envelopes Using the MP Tray

Paper Settings

Change the Paper Size and Paper Type

Select the Tray to Be Used For Printing

Change the Check Paper Size Setting

Recommended Print Media

Load Documents

Load Documents in the Automatic Document Feeder (ADF)

Load Documents on the Scanner Glass

Unscannable and Unprintable Areas

Using Special Paper

Print

Print from Your Computer (Windows)

Print a Document (Windows)

Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows)

Print as a Poster (Windows)

Print on Both Sides of the Paper (Windows)

Print as a Booklet (Windows)

Secure Print (Windows)

Use a Macro from Your Computer (Windows)

Use a Preset Print Profile (Windows)

Create or Delete Your Print Profile (Windows)

Change the Default Print Settings (Windows)

Configure the Optional Tray Settings (Windows)

Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows)

Monitor the Status of the Machine from Your Computer (Windows)

Print Settings (Windows)

Print from Your Computer (Mac)

Print a Document (Mac)

Print on Both Sides of the Paper (Mac)

Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)

Secure Print (Mac)

Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac)

Monitor the Status of the Machine from Your Computer (Mac)

Print Options (Mac)

Print One Page Duplicates on Different Types of Paper

Cancel a Print Job

Test Print

Scan

Scan Using the Scan Button on Your Brother Machine