Brother DCP 1000 User Manual

Power Cord

Drum Unit Assembly

With Free

Starter

Toner Cartridge

(Up to 1000 pages)

CD-ROM

Paper Support

Warranty Registration (For USA Only)

Software License Agreement

Accessory Order Form

Owner’s Manual

Quick Setup Guide

Filter Core for

Bi-directional

IEEE 1284

Filter Core for

USB Cable

Cable Tie

DCP-1000

Quick Setup Guide

THANK YOU!

CONGRATULATIONS ON PURCHASING THE ULTIMATE BROTHER MACHINE. WE ARE SURE YOU WILL BE THRILLED WITH THE CONVENIENT WAY YOUR NEW MACHINE PERFORMS SO MANY TASKS WITH DAZZLING RESULTS!

Follow these simple instructions in numerical order.

For more details, press Reports and on your machine or see your Owner’s Manual.

If you cannot solve a problem: Refer to Frequently Asked Questions (FAQs) on Brother World Wide Web;

URL: http://solutions.brother.com

Call Brother Customer Service at:

USA: 1-800-284-4329 (9AM-5PM EST)

1-800-284-3238 (TTY service for the hearing impaired)

In Canada: 1-877-BROTHER (8AM-8PM EST)

1-514-685-6464 (in Montreal)

Packing List

Keep the packing materials for possible future transport. If you do not pack the machine properly, it may void your warranty.

A. Unpack the drum unit assembly, and gently

Install the Drum Unit

rock it from side to side five or six times to distribute the toner evenly inside the cartridge.

To prevent damage to the drum, do not expose it to light for longer than a few minutes.

Do NOT remove the clear plastic starter sheet-this will be ejected while the DCP is warming up.

Starter Sheet

B. Open the scanner cover of the machine by

pulling the lever toward you and lifting the cover.

C. Holding the drum unit by its handles, insert it

into the DCP.

Attach the Plastic Supports

A. Attach the plastic paper

B. Pull out the paper tray and

C. If your paper size is A4 or

and Pull out the Paper Tray

support to the multi-purpose sheet feeder.

the extension.

Letter, unfold the paper stopper by pulling it toward you.

(For legal paper)

A. Adjust the guides to the position for the paper

B. Fan the paper well.

C. Push down the paper lever. Load the paper

Load Paper

size you are using.

(with the lever down). Make sure the print side is toward the DCP and the paper level is stacked below the paper mark. The feeder can hold up to 200 sheets of paper, or up to 10 envelopes.

D. Close the scanner cover.

Load the paper with the lever down

Press and slide

– 1 –

Turn the power switch OFF.

Install Power Cord

Do Not connect the Parallel or USB Cable.

(For A4/Letter paper)

version B

Setting Up the DCP and PC to Work Together

1234567890123456789012345678901212345678901234567890123456789012

Before You begin

• You must set up the hardware and install the driver before you can use your DCP as a printer and scanner with your application.

• Please see the README.WRI file in the root directory of the CD-ROM for last-minute important installation and troubleshooting information.

• Please purchase the appropriate interface cable you intend to use (Parallel or USB).

• If you have any problem for installation, visit us at: http://solutions.brother.com

Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).

Follow the instructions in this guide for your operating system and interface.

For Windows® 95/98/98SE/Me/2000 Users

Step 1.

Turn the DCP power switch OFF and disconnect your DCP from your computer if you already connected an interface cable.

Step 2.

For Windows® 2000 Professional, you must be logged on as the Administrator.

Step 3.

Turn on your computer.

Insert the CD-ROM into the CD-ROM drive. If the model name screen appears,

click on your model name. The CD-ROM main menu will appear.

(If this window does not appear, use Windows directory of the Brother CD-ROM.)

Explorer to run the setup. exe program from the root

1. Click Install Software.

5. When the PaperPort

displays your Name and Company, either change or accept them, and then click Next.

Setup window

2. Click Multi-Function Link

Pro Suite

in Main Application. *1

6. When the Choose Destination Location

window displays the path where the PaperPort change or accept, and then click Next.

files will be installed, either

3. Click Install.

7. When Register Today screen appears,

click Next. This is registration for Paper

. Follow the instructions.

Por t

For Parallel

23456789012345678901234567890121234567890123456789012345678901

Please see NEXT PAGE

23456789012345678901234567890121234567890123456789012345678901

For USB

23456789012345678901234567890121234567890123456789012345678901

4. The InstallShield Wizard Setup

window will appear briefly, followed by the PaperPort Yes.

Setup window. Click

8. When the Brother MFL Pro Suite

Installation window appears, click Next to begin installing the MultiFunction Link

Pro Suite. *2

9. When the Setup Type window appears,

select Standard, and then click Next. The application files will be copied to your computer.

ScanSoft True Type fonts. PaperPort viewing scanned documents. ScanSoft into PaperPort inserts it into your default word processor.

*1 Multi-Function Link® Pro Suite includes Printer Driver, Scanner Driver,

™

PaperPort®, ScanSoft™Text Bridge® software, Remote Setup and

, is an OCR application that converts an image into text and

is a document management application for

10. The Connect Cable window will appear.

™

TextBridge®, which is integrated

*2 If an error message appears during the installation

process, or you have previously installed MFL Pro Suite, you will first have to uninstall it. From the

Start menu, select Programs, Brother, Brother MFL Pro Suite, Uninstall, and then follow the

instructions on the screen.

– 2 –

*3 Even if you select NO, later you will be able to

launch the Brother Control Center to use the Scan key. See

Center

, Chapter 8 in the On-Line

AutoLoad the Brother Control

Documentation (Owner’s Manual) on the CDROM.

+ 2 hidden pages

Brother DCP 1000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual