Brother BAS-415 User Manual
BAS--
BAS
415 --
415
Quick Reference Guide
Quick Reference Guide
For Technical Assistance Please Call 1-877-4BROTHER
ENTERING DISK DATA & SETTING THE COLOR SEQUENCE
1.
Insert floppy disk into disk drive
Use BACK and FORWARD keys
to pick an empty memory location.
2.
3.
4.
5.
6.
7.
ENTER
ENTER
START
Press ENTER.
Press UP or DOWN arrow to begin
reading the disk.
Press UP or DOWN arrows to scroll
the disk directory.
Press (*) key to read
*
Press ENTER to copy the design to
the machine memory.
Press START to calculate design
size and number of color changes.
the design name.
ENTER A DESIGN FROM EDITOR MODE
Use BACK and FORWARD keys
to pick an empty memory location.
ENTER
#
ENTER
START
Program color sequence (see Step 8)
Use ARROW keys to center your design (see Step 12)
Press ENTER.
Press the (#) key until “EDITOR”
appears on the screen.
Press UP or DOWN arrows to begin
reading computer directory.
Press ENTER to copy the design to
the machine memory.
Press START to calculate design
size and number of color changes.
8.
9.
10.
11.
12.
13.
NEEDLE
SET
END
#
Press NEEDLE SET to enter
color programming mode.
Press UP or Down arrow keys to
assign needle number (Color).
A = Needle Number 10
B = Needle Number 11
C = Needle Number 12
Press FORWARD arrow to select
next color of design or BACK arrow
for previous color of design.
Press END to exit needle set mode.
Use ARROW keys to center your
design in the frame.
Press (#) key to trace the mask
(outside edge) of the design.
Press (#) key to trace the mask of the design (see Step 13)
Press START to start sewing (see Step 14)
ENTER A DESIGN FROM THE MACHINE MEMORY
Use BACK and FORWARD keys
to pick a design from memory.
ENTER
START
Program color sequence (see Step 8)
Use ARROW keys to center your design (see Step 12)
Press (#) key to trace the mask of the design (see Step 13)
Press START to start sewing (see Step 14)
Press ENTER to view design name
Press START to calculate design
size and number of color changes.
14.
START
Press START to start sewing.
SETTING THE ROTATE, MIRROR, REPEAT
ERASING A STORED DESIGN FROM MEMORY
After loading your design and at the
display below, do the following.
Set STR_P. Co. # #
N_No. # # # # # # # # #
EDIT
EDIT
END
START
To enter EDIT mode.
To select which option you wish
to change.
To enter that options EDIT
values.
To change the values of the
option you choose
To EXIT the edit mode
To return to the above display
with changes in effect.
Use BACK and FORWARD keys
to pick a design from memory.
ENTER
CLEAR
END
SETTING HOOP FEED POSITION
HOOP
FEED
Press ENTER to view design name
Press CLEAR to delete the design
from machine memory.
Press END to return to
“FileNo” screen
Press HOOP FEED to move the frame to
the current HOOP FEED position
If you wish to change the position
Use the ARROW keys to move the frame
to a new position
“FLOATING” THROUGH A DESIGN
To move through a design after you have started
sewing you must first STOP the machine.
R_St: # # # # # # # # # Co. # #
N_No. # # # # # # # #
Press “#” to display a “J” in the grey
#
#
#
box
To move by 100 stitches either
FORWARD or BACK in design
Press “#” again to display a “C” in
the grey box
To move by color changes either
FORWARD or BACK in design
Press “#” again to display a “T” in
the grey box
To move BACK only to the first stitch
of the design
ENTER
HOOP
FEED
NEEDLE
SELECT
END
Press ENTER to store the new HOOP
FEED position
Press HOOP FEED to toggle between
sewing position and hoop feed position
MOVING THE NEEDLE CASE
To enter the NEEDLE
SELECT mode
To move the needle case left
and right.
To EXIT the NEEDLE SELECT
mode
#
Press “#” To display a “I” in the grey
box
To move the frame in small increments
to correct registration
Loading...