Broan RMP17004 Specifications
RMP17004
POWER PACK
SPECIFICATION SHEET
Designed to fit flush with the bottom of a cabinet or
custom hood for an exceptional custom mounted
look.
FEATURES
430 Stainless Steel #4 Brushed facing
•
Fully enclosed bottom
•
6” round duct connector/backdraft damper
•
400 cfm centrifugal blower
•
Multi-speed control
•
Halogen lighting, Type GU10, MR16, shielded, 120V 50W
•
max. (2 bulbs included)
Dishwasher-safe aluminum filter features a quick-release
•
latch and professional style appearance
27-9/16” wide design fits cabinet orcustom hood that’s 30”
•
to 42” wide
Heat Sentry
•
when excess cooking heat is detected
TM
- automatically turns blower to high speed
OPTIONS
Replacement grease filter
•
Non-ducted filter (Model FILTEREB40)
•
Stainless liner (RML7030L, RML7036L, RML7048L,
•
RML7030S, RML7036S, RML7048S)
Exterior blower version (RMPE7004) available, providing
•
600, 900, 1200, or 1500 CFM exhaust
TYPICAL SPECIFICATION
Range hood shall be Broan Model RMP17004.
Unit shall be for indoor use only.
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using a non-ducted filter).
Motor to be permanently lubricated.
Unit shall have multi-speed fan switch and separate light switch.
Bottom shall be fully enclosed.
Air delivery shall be no less than 400 CFM.
Unit shall be U.L. and
cUL listed.
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.53 400 9.0 6” round
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada, Inc. Mississauga, Ontario www.broan.ca 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Mount power pack so bottom of unit is
24” to 30” above cooking surface.
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by the
Home Ventilating Institute, for off-the-shelf products, as
they are available to consumers. Product performance
is rated at 0.1 in. static pressure, based on tests
conducted in a state-of-the-art test laboratory. Sones
are a measure of humanly-perceived loudness, based
on laboratory measurements.
90M 99043177F
RMP17004 MOUNTING
18” - 24”
9-5/8”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN INSIDE CABINET DIMENSIONS)
RMP17004 MOUNTING
HOLE IN THE BOTTOM
OF THE CABINET
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada, Inc. Mississauga, Ontario www.broan.ca 877-896-1119
Loading...