QDE SERIES
RANGE HOOD
SPECIFICATION SHEET
A sleek, contemporary styled range hood with highperformance capability and Energy Star qualification.
FEATURES
• Clean, sleek appearance
• Durable, baked-on polyester finish paint or brushed finish
stainless steel
• Over 50% quieter than the average range hood
• Large, full filter design - dishwasher-safe for easy cleaning
• Dual fluorescent lights provide lighting for cooktop visibility
(lamps included)
• Centrifugal blower provides increased performance and
quieter operation.
• Flush-mounted rocker controls
• Versatile design allows for 3¼" x 10" vertical and horizontal
ducting
• Available in 30" width in White, Black, and Stainless Steel
• For indoor use only
SPECIFICATIONS
Volts 120
HZ 60
CFM, Normal (Horizontal / Vertical) 130 / 120
CFM, High (Horizontal / Vertical) 290 / 250
Watts, Normal (Horizontal / Vertical) 36.2 / 36.3
Sones, Normal (Horizontal / Vertical) 0.8 / 1.1
Sones, High (Horizontal / Vertical) 5.5 / 6.0
Amps 1.6
Controls 2-sp rocker
Fluorescent Light CFQ13W/G24q
†
2 bulbs included.
†
TYPICAL SPECIFICATION
Range hood shall be Broan QDE Series.
Unit will have clean, contoured appearance with no sharp
edges. Finish to be baked-on polyester paint (matte finish
stainless steel). It must have a fully-enclosed bottom and
dishwasher-safe, full filters.
Hood to be convertible between 3¼" x 10" vertical and
horizontal ducted (using two washable aluminum filters).
Range hood to have a centrifugal blower and (2) 13-watt
(max.) fluorescent lights. Blower and lights shall be operated
using rocker-type controls.
Air delivery shall be no less than 120 cfm and sound level no
greater than 1.1 Sones at normal speed (250 cfm and 6.0 Sones
at high speed). Air and sound ratings to be certified by HVI.
Unit shall be U.L. and CU.L. listed and Energy Star qualified.
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
LISTED
01D 99044151C