Broan APE130SS Specsheet
APE1 SERIES
SPECIFICATION SHEET
ENERGY STAR
®
PRO-STYLE RANGE HOOD
Designed to meet the performance needs of today's
higher BTU conventional cooking appliances and
consumers' desire for ENERGY STAR® qualification.
FEATURES
Professional styling in Stainless Steel only
•
Available in 30" width only
•
Infinite speed rotary control with solid state blower memory
•
and separate on/off switch
Two-position light switch for "bright" or "night-light" illumination
•
Single 42W GX24Q4 Fluorescent lamp with 4W C-7 night
•
light (included)
High efficiency dual centrifugal blower with resilient anti-
•
vibration motor mounts
Broan Heat Sentry
•
speed when excess cooking heat is detected
Two washable, micromesh aluminum grease filters with
•
anitmicrobial protection that inhibits the formation of odorproducing bateria and protects filter from discoloration
Hemmed bottom for safety and good looks
•
Damper/duct connector included
•
Non-Ducted Recirculation Kit - NDK358 Series
•
- ENERGY STAR® qualification is void if hood is used in a
non-ducted application
Replacement filters (package of 2):
•
- Grease with anitmicrobial protection - 97017456
(BPAPFA)
- Grease without anitmicrobial protection - 97017455
(BPRPFA)
- Non-Ducted - 97007662 (88F)
For indoor use only
•
TM
- automatically turns blower to high
TYPICAL SPECIFICATION
Range hood shall be Broan APE1 Series.
Unit shall have a backdraft damper and be ducted
vertically (horizontally) to the outside.
Unit shall have washable micromesh aluminum filters with
special antimicrobial protection.
Unit shall have a permanently lubricated, dual centrifugal
blower resiliently mounted and controlled with an infinite
speed, solid state control. RPM not to exceed 1618.
Hood shall have an infinite speed rotary control with
memory and a separate, two-position light switch. Sides
shall be straight and bottom hemmed - with no sharp
edges. Stainless steel shall be 24-gauge, 430 series.
Air delivery shall be no less than 440 cfm and sound levels
no greater than 7.0 Sones. All air and sound ratings shall
be certified by HVI.
Unit shall be U.L. and cU.L. listed and ENERGY STAR®
qualified.
NDK358 SERIES
NON-DUCT
RECIRCULATION
KIT
SPECIFICATIONS
CFM SONES
VOLTS AMPS HZ MAX. NORM. MAX. NORM.
120 1.8 60
440 200 7.0 0.9 3¼" x 10" (Vert.)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
440 200 7.0 0.7 3¼" x 10" (Horiz.)
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies a nd procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
DUCT
APE1 SERIES
PRO-STYLE
RANGE HOOD
01M 99044694A
Loading...