Broan AER110LBN Specifications

MODEL AER110LBN
ROOMSIDE SERIES
DECORATIVE FAN / LIGHT

SPECIFICATION SHEET

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated motor - engineered for continuous
operation

• Dynamically balanced centrifugal blower wheel for quiet, efficient
performance

• Low RPM for quiet operation

HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• Polymeric, 4” duct connector with tapered sleeve and no metallic
clatter

• 5-3/4” height allows for 2” x 6” ceiling installations

• Sturdy, easy, four-point mounting directly to joist

LIGHT FIXTURE:

• Low-profile, consumer-validated design

• Bright nickel corrosion-resistant trim

• Adapter bracket for constant air flow completely covers drywal cuts

• Acrylic lens

• Light fixture is plug-in and removable

• Dimmable,16-Watt intergrated LED lighting for energy efficiency

• 3500K color temperature provides soft white light - ideal for
bathroom illumination

• LED lasts up to 15,000 hours for maintenance-free convenience

CONTROLS (Purchase separately):

• Refer to Broan’s catalog for a complete line of accessories to
effectively adapt this fan to your construction requirements.

DIMMING CONTROLS :

• May not be compatible with all dimmer controls

• Each application is unique and various factors such as load,
common neutrals or other electrical products on the circuit can, in
certain instances, cause variance in system performance.

• Dimmer model numbers vary slightly depending on
color, packaging type, etc. such that variations of Model
numbers may be suitable. Consult dimming system
manufacturer for additional support in operation

* For a list of compatible controls, see Broan.com.
For installation in flat ceilings only.

U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty

TYPICAL SPECIFICATION

Fan / Light shall be Broan Model AER110LBN.
Fan / Light shall have corrosion resistant galvanized steel

housing with four-point mounting capability. It shall be ducted
to a roof or wall cap using 4” round ductwork.

Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed
for continuous operation.

Non-metallic damper/duct connector shall be included.
Light fixture assembly shall be plug-in, removable and include

a acrylic lens. It will have a corrosion-resistant base.
LED shall be 16-Watt with 3500K color temperature and 1100

lumen output (min.).
Air delivery shall be no less than the airflow values and

no greater than the sound level values listed in the HVI
Performance Specifications provided in this specification (see
following chart). All air and sound ratings shall be certified by
HVI.

Ceiling Ventilator shall be cULus Listed for use in insulated
ceilings (Type I.C.).

JA8-2019

Broan Hartford, Wisconsin www.broan.com 800-558-1711

Venmar Ventilation ULC Drummondville (Québec), Canada www.broan.ca 877-896-1119

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

02B 1101791C

PERFORMANCE RATINGS

AERN110SLW

MODEL AER110LBN ROOMSIDE SERIES
DECORATIVE FAN / LIGHT

HVI PERFORMANCE

Static Pressure CFM Sones Fan Watts Duct

0.1 110 1. 5 26.1

0.25 89

HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.

4" Round

ELECTRICAL & WEIGHT

Volts Hz Amps*

120 60 0.6 16.5 lbs.

* Total connected load.

Shipping

Weight

AIR FLOW PERFORMANCE

0.700

0.600

0.500

0.400

0.300

Static Pressure

0.200

O - Inches of Water Gauge)

2

0.100

(in. H

0.000
0 20 40 60 80 100 120 140

Air Flow (CFM - Cubic Feet per Minute)

Broan Hartford, Wisconsin www.broan.com 800-558-1711
Venmar Ventilation ULC Drummondville (Québec), Canada www.broan.ca 877-896-1119