Breville BOV650XL User Manual
The Compact Smart Oven™
Instruction Booklet Livret d’instructions
BOV650XL
2
CONGRATULATIONS
On the purchase of your new Breville Compact Smart Oven™
CONTENTS
4 Breville recommends safety first
7 Know your Breville Compact
Smart Oven™
11 Before first use
- Preparing the oven for use
- A note on cooking times
- A note on STANDBY mode
- A note on optional settings
18 Operating your Breville Compact
Smart Oven™
19 - TOAST function
21 - BAGEL function
23 - BAKE function
26 - ROAST function
28 - BROIL function
31 - PIZZA function
35 - COOKIES function
37 - REHEAT function
40 Using the plate warming tray
42 Care and cleaning
- Cleaning the outer body and door
- Cleaning the interior
- Cleaning the crumb tray
- Cleaning the wire rack, broil rack,
and baking pan.
- Storage
46 Troubleshooting
48 Recipes
72 One year limited warranty
4
5
BREVILLE RECOMMENDS SAFETY FIRST BREVILLE RECOMMENDS SAFETY FIRST
We at Breville are very safety conscious. We design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind.
When using electrical appliances, basic
safety precautions should always be
followed including:
Remove and safely discard any packing •
materials and promotional labels before
using the oven for the first time.
To eliminate a choking hazard for young •
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
Do not place the oven near the edge of a •
bench or table during operation. Ensure
the surface is level, clean and free of
water, flour, etc.
Always operate the oven on a stable, •
heat resistant surface. Do not use on a
cloth-covered surface, near curtains or
other flammable materials.
A fire may occur if the oven is covered •
or touches flammable material, including
curtains, draperies, walls, and the like,
when in operation.
Do not place the oven on or near a hot •
gas or electric burner, or where it could
touch another heated oven.
Do not let the power cord hang over the •
edge of a table or counter, or touch hot
surfaces.
To protect against electric shock do not •
immerse the oven, power cord or power
plug in water or any other liquid.
When operating the oven, keep a •
minimum distance of 4” (10cm) of space
on both sides of the appliance. This will
allow for adequate air circulation and help
prevent the possibility of wall discoloration
due to radiated heat.
Do not touch hot surfaces. Appliance •
surfaces, including the door and outer
surface of the oven are hot during and after
operation. To prevent burns or personal
injury, always use protective hot pads or
insulated oven mitts, or use handles and
knobs where available, when inserting,
removing or handling items from the oven.
Alternatively, allow the oven to cool down
before handling.
Extreme caution must be used when •
removing pans, dishes and accessories
such as the included broil rack and baking
pan, that contain hot oil or other hot liquids.
The glass of the oven door has been •
specially treated to make it stronger, more
durable and safer than ordinary glass,
however it is not unbreakable. If struck
extremely hard, it may break or weaken, and
could at a later time, shatter into many small
pieces without apparent cause.
Do not leave the door standing open for •
extended periods of time when the oven is
turned ON.
The top of the oven is very hot during and •
after operation. Do not store any item on
top of the oven when in operation. The only
exceptions are described on Page 40 - one
layer of ceramic plates for warming, and
the any accessory provided by Breville for
use in the ribbed section on top of the oven.
If the ribbed section is used as a warming
tray during operation, protective hot
pads or insulated oven mitts should
be used when removing heated items.
Alternatively, allow the oven to cool down
before handling.
Do not place cardboard, plastic, paper, •
or other flammable materials in the oven.
Caution should be exercised when using •
pans and dishes constructed of materials
other than metal. If using ceramic or
glass pans or dishes it is important that
they are oven safe to prevent cracking.
Caution should be exercised when using •
lids in the oven, as pressure build up in
a covered pan or dish may cause hot
ingredients to expel or the dish to crack.
Oversized foods and metal utensils must •
not be inserted in the oven as they may
create fire or risk of electric shock.
Metal utensils such as knives should not •
be inserted in the oven to remove food
residue from the quartz tube elements.
This can damage the elements as well as
lead to electrocution.
It is recommended to use only the •
accessories supplied with this oven.
When broiling, the broil rack must be
inserted into the supplied baking pan.
The use of any accessory attachments •
not recommended by Breville may cause
injuries.
Do not use the toast function for •
purposes other than toasting foods.
Do not place hands inside the oven •
during operation.
This appliance is for household use only.•
Do not use the appliance for anything •
other than its intended purpose as
described in this booklet. Do not use
outdoors. Do not use in moving vehicles
or boats.
Do not attempt to operate the oven by •
any method other than those described
in this booklet.
Do not leave the appliance unattended •
when in use.
Close supervision is necessary when the •
appliance is used by or near children.
This appliance is not intended for use by •
persons (including children) with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
To turn OFF the oven, press the START/•
CANCEL button on the control panel.
The oven is OFF when the button
surround illumination is OFF and LCD
is blue.
To disconnect from the wall outlet, first •
turn OFF the oven, and then remove the
power plug from the wall outlet.
When the oven is not in use or when left •
unattended, disconnect the oven from
the wall outlet.
Before attempting to move the oven, •
or before assembling or disassembling
parts, cleaning or storing, turn OFF the
oven, allow to cool, and disconnect from
the wall outlet.
Strictly follow the Care and Cleaning •
instructions on Page 42.
Do not clean with metal scouring pads.
Pieces can break off the pad and touch
electrical parts, creating a risk of electric
shock.
Regularly clean the crumb tray to discard •
crumbs. Ensure to turn OFF the oven,
remove the power plug from the wall
outlet and allow the oven to cool before
pulling the crumb tray out.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE
AND SAVE FOR FUTURE REFERENCE
6
7
BREVILLE RECOMMENDS SAFETY FIRST
Always ensure the crumb tray is •
thoroughly dried after cleaning. Ensure to
re-insert the crumb tray before operating
the oven.
Do not store any materials other than the •
supplied accessories in the oven when
not in use.
This appliance is equipped with a power •
cord having a grounding wire with a
grounding plug. The appliance must
be grounded using a 3-hole properly
grounded outlet. In the event of an
electrical short circuit, grounding reduces
the risk of electrical shock.
If the power outlet is a standard •
2-prong wall outlet, it is your personal
responsibility and obligation to have
it replaced with a properly grounded
3-prong wall outlet.
Do not, under any circumstances, cut or •
remove the third (ground) prong from the
power cord or use an adapter.
Consult a qualified electrician if the •
grounding instructions are not completely
understood, or if doubt exists as to
whether the appliance is properly
grounded.
The installation of a residual current •
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operation current not exceeding 30mA
be installed in the electrical circuit
supplying the appliance. See your
electrician for professional advice.
Regularly inspect the supply cord, plug •
and actual appliance for any damage.
Do not operate if damaged in anyway
or after the appliance malfunctions.
Immediately cease use of the appliance
and call Breville Customer Service at
1-866-BREVILLE for examination, repair
or adjustment.
For any maintenance other than cleaning, •
call Breville Customer Service at
1-866-BREVILLE.
Your Breville appliance comes with
a unique Assist Plug™, conveniently
designed with a finger hole in the power
plug for easy and safe removal from
the wall outlet. For safety reasons it is
recommended you plug your Breville
appliance directly into its own electrical
outlet on a dedicated circuit separate from
other appliances. If the electric circuit is
overloaded with other appliances, your
appliance may not function properly. Use in
conjunction with a power strip or extension
cord is not recommended.
SHORT CORD
INSTRUCTIONS
Your Breville appliance is fitted with a
short power supply cord as a safety
precaution to prevent personal injury or
property damage resulting from pulling,
tripping or becoming entangled with a
longer cord. Do not allow children to use
or be near this appliance without close
adult supervision. If an extension cord is
used, (1) the marked electrical rating of the
cord set or extension cord should be at
least as great as the electrical rating of the
appliance, (2) the cord should be arranged
so that it will not drape over the countertop
or tabletop where it can be pulled on by
children or tripped over unintentionally
and (3) the extension cord must include a
3-prong grounding plug.
KNOW
your Breville Compact Smart Oven™
SAVE THESE
INSTRUCTIONS
8
9
LCD screen. L.
START/CANCEL button. M.
FUNCTION dial. N.
TEMPERATURE and TIME dial. O.
TEMPERATURE CONVERSION P.
button.
FROZEN FOODS BUTTON.Q.
DO NOT TOUCH HOT SURFACES.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALLOW THE
OVEN TO COOL DOWN BEFORE
HANDLING.
KNOW YOUR BREVILLE COMPACT SMART OVEN™KNOW YOUR BREVILLE COMPACT SMART OVEN™
10" x 10" enamel broil rack.A.
10" x 10" enamel baking pan.B.
Door handle.C.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
Ribbed plate warming tray.D.
NOTE:
Only place items in the ribbed
section on top of the oven as
described on Page 40.
Top rack height position: BROIL E.
function.
Middle rack height position: TOAST, F.
BAGEL, PIZZA and COOKIE functions.
Bottom rack height position: BAKE, G.
ROAST, and REHEAT functions.
Wire rack. H.
Crumb tray.I.
Ventilation slotsJ.
Breville Assist Plug™K.
!
!
NOTE:
When the oven is plugged into a
wall outlet, the oven alert will sound
twice and the LCD screen will
illuminate blue for 10 minutes before
entering STANDBY mode.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
PQ
10
11
BEFORE FIRST USE
of your Breville Compact Smart Oven™
PREPARING THE OVEN FOR USE
Remove and safely discard any packing 1.
material, promotional labels and tape
from the oven.
Remove the crumb tray, wire rack, broil 2.
rack, and baking pan from the polyfoam
packaging. Wash them in warm soapy
water with a soft sponge, rinse and dry
thoroughly. Insert the crumb tray into
the oven.
Wipe the interior of the oven with a soft 3.
damp sponge. Dry thoroughly.
Place the oven on a flat, dry surface. 4.
Ensure there is a minimum distance of
4" (10cm) of space on both sides of the
appliance. Ensure there are no items on
top of the oven.
Unwind the power cord completely and 5.
insert the power plug into a grounded
wall outlet.
The oven alert will sound twice and the 6.
LCD screen will illuminate.
NOTE:
In order to remove any protective
substances on the heating elements,
it is necessary to run the oven
empty for 15 minutes.
NOTE:
Ensure the area is well ventilated
as the oven may emit vapors. These
are safe and not detrimental to the
performance of the oven.
Turn the FUNCTION dial until the 7.
indicator reaches the PIZZA function.
The figure on the LCD screen indicates
the preset temperature of '425°F'. The
preset FROZEN FOODS setting will
also be displayed.
Press the center of the TEMP/TIME
dial. The LCD screen will indicate the
preset time of '15 MINS'.
Press the START/CANCEL button to 8.
activate this setting. The oven alert
will sound, the button surround will
illuminate red and the LCD screen will
illuminate orange.
The LCD screen will indicate a 9.
blinking ‘PREHEATING’. Once the oven
has reached the set temperature, the
temperature alert will sound.
BEFORE FIRST USE
WHEN AT
TEMP.
12
13
Toast
Searing top and bottom heat: seals and
crisps.
Bake
Even heating: cooks right through.
It is normal to notice the following occur
during the cooking cycle:
It is normal that during the BROIL •
function, the bottom set of elements
turn off while the top set is heating at
full power.
It is normal that the ends of each heating •
element will glow more brightly than the
middle of the element.
It is normal that the elements are heating •
even if they are not lighting up.
The cooking temperature can be •
adjusted in 10°F increments, from 120°F
to a maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to a
maximum 230°C).
b) To change the cooking time, press the
center of the TEMP/TIME dial until the
LCD screen displays the time screen.
Turn the dial to the left to reduce the •
cooking time, or to the right to increase
the cooking time.
The cooking time can be adjusted in •
one minute increments up to 1 hour,
and in 5 minute increments between
1 and 2 hours.
This cooking technology allows foods to
cook more evenly and quickly, significantly
reducing cooking times. The oven’s preset
cooking temperatures and times, as well
as the cooking temperature and time
directions on pre-packaged foods, may
need to be changed depending on the
recipe, the amount of food and your
personal taste.
We recommend experimenting with the
temperature and time settings to produce
the desired results.
The cooking temperature and time can
be adjusted before or during the cooking
cycle.
Pressing the center of the TEMP/TIME dial
changes the display on the LCD screen
from TEMPERATURE to TIME and vice
versa; while rotating the dial increases or
decreases the TEMPERATURE or TIME.
NOTE:
The TEMP/TIME dial also functions
as the Darkness and Slice selection
control on the TOAST and BAGEL
functions.
a) To change the cooking temperature,
press the center of the TEMP/TIME
dial until the LCD screen displays the
temperature screen.
Turn the dial to the left to reduce the •
temperature, or to the right to increase
the temperature.
A NOTE ON COOKING TIMES
The Breville Compact Smart Oven™
features Element IQ™ - a unique cooking
technology that adjusts the power of the
cooking elements for optimum results.
Broil
High temperature top heat, and low bottom
heat: melts and browns.
BEFORE FIRST USEBEFORE FIRST USE
The time will be displayed and 10.
automatically begin to count down in
one minute increments.
At the end of the cooking cycle, the 11.
oven alert will sound three times. The
START/CANCEL button surround
will no longer illuminate red and LCD
screen will illuminate blue.
The oven is now ready to use.12.
NOTE:
The cooking cycle can be stopped
at any time by pressing the START/
CANCEL button. The START/
CANCEL button surround will no
longer illuminate red and the LCD
screen will illuminate blue.
14
15
BEFORE FIRST USEBEFORE FIRST USE
A NOTE ON RACK HEIGHT
POSITIONS
Cooking results are significantly affected
by the position of the wire rack as this
determines how close the food is to the
heating elements. We highly recommend
following the rack height position for each
function as printed on the right hand side
of the oven door’s glass window. However,
these are a guide only. Certain foods may
require a different rack height position
depending on the recipe, the amount and
size of the food and your personal taste.
Top rack height position: BROIL function.
Middle rack height position: TOAST,
BAGEL, PIZZA and COOKIE functions.
Bottom rack height position: BAKE,
ROAST, and REHEAT functions.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom rack height
position. This is to minimize the risk
of the metal foil coming into contact
with the top heating elements.
For optimum cooking results:
The wire rack should always be inserted •
into the rack height position with the
spokes facing upwards.
Food should be positioned on the center •
of the wire rack, broil rack or baking tray
to let maximum airflow reach the food.
A NOTE ON STANDBY MODE
When the oven is plugged into a wall outlet,
the oven alert will sound twice and the
LCD screen will illuminate for 10 minutes
before entering STANDBY mode. When
in STANDBY mode, the LCD screen will
cease to illuminate, however the word
'STANDBY' will be visible.
To re-activate the oven out of STANDBY
mode, press the START/CANCEL button
on the control panel, or turn any dial.
The LCD screen will re-illuminate. Press
the START/CANCEL button to activate
the oven.
The oven is ON (preheating and cooking)
when the oven alert sounds, the button
surround is illuminated red and the LCD
screen illuminates orange. The oven is
OFF when the START/CANCEL button
is pressed a second time, the button
surround no longer illuminates red, and
the LCD screen illuminates blue.
A NOTE ON OPTIONAL SETTINGS
Temperature Conversion Button
The temperature reading on the oven is
preset to Fahrenheit. Pressing the
TEMPERATURE CONVERSION button
allows the Fahrenheit temperature reading
to be converted to Celsius. The
corresponding ‘C˚’ or ‘F ˚’ symbol is
displayed on the LCD screen.
The TEMPERATURE CONVERSION
button may be selected when using the
BAKE, ROAST, BROIL, PIZZA, COOKIE
and REHEAT functions.
NOTE:
The TEMPERATURE
CONVERSION button can be used
as an electronic temperature
conversion tool, particularly
convenient for international recipes.
NOTE:
If you have changed the default
Fahrenheit temperature reading to
Celsius, the setting will remain in the
memory of the oven until the
TEMPERATURE CONVERSION
button is pressed a second time or
the oven is unplugged from the wall
outlet. When the oven is plugged
back into the wall outlet, the
temperature reading will
automatically return to the preset
Fahrenheit setting.
16
17
BEFORE FIRST USE
On the PIZZA function, FROZEN FOODS
is the default setting, and the frozen symbol
is displayed on the LCD screen. When
cooking fresh pizzas, the setting can be
de-selected by pressing the
FROZEN FOODS button.
NOTE:
If you have de-selected the
FROZEN FOODS setting, the
setting will remain in the memory
of the oven and be activated for
each subsequent PIZZA cycle until
the FROZEN FOODS button is
pressed a second time, or the oven
is unplugged from the wall outlet.
When the oven is plugged back
into the wall outlet, the function will
automatically return to the preset
PIZZA function with the FROZEN
FOODS setting.
Frozen Foods Button
The FROZEN FOODS button adds the
recommended, additional time required
to defrost and then toast frozen bread or
bagels and cook frozen pizza or cookie
dough.
The FROZEN FOODS button may be
selected when using the TOAST, BAGEL,
BAKE and COOKIE functions, and is the
default setting on the PIZZA function.
On the TOAST, BAGEL, BAKE and COOKIE
functions, the FROZEN FOODS button
can be selected before or during the cycle.
The setting can be de-selected by pressing
the FROZEN FOODS button a second
time. The frozen symbol is displayed on
the LCD screen whenever this setting is
selected.
NOTE:
If you have selected the FROZEN
FOODS button and the frozen
symbol is displayed on the LCD
screen, the setting will remain in
the memory of the oven and be
activated for each subsequent
TOAST/BAGEL/BAKE/COOKIE
cycle until the FROZEN FOODS
button is pressed a second time,
or the oven is unplugged from
the wall outlet. When the oven is
plugged back into the wall outlet,
the function will automatically return
to the preset TOAST/BAGEL/BAKE/
COOKIE function without the
FROZEN FOODS setting.
18
19
TOAST FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
The TOAST function browns and crisps
the outside of your bread while keeping the
inside soft and moist. This function is also
ideal for English muffins and frozen waffles
Insert the wire rack into the middle rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
If toasting 1-2 slices, center the slices 2.
on the wire rack. If toasting 3-4 slices,
evenly space them with 1-2 slices at the
front of the wire rack and 1-2 slices at
the back of the rack.
Close the oven door.3.
Turn the FUNCTION dial until the 4.
indicator reaches the TOAST function.
The left figure on the LCD screen
indicates the preset browning or
'Darkness' setting '4', while the right
figure on the LCD screen indicates the
preset number of slices '2'.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — TOAST
OPERATING
your Breville Compact Smart Oven™
The browning setting and number of 5.
slices can be adjusted before or during
the toasting cycle.
a)
To change the browning setting,
press the center of the TEMP/
TIME (Darkness/Slices) dial until
the LCD screen displays a flashing
'DARKNESS'.
Turn the dial to the left to reduce the
browning setting, or to the right to
increase the browning setting.
NOTE:
The browning settings range from
‘1’ (lightest) to ‘7’ (darkest).
As a general guide:
Desired Toast Color Setting
Light color toast 1 or 2
Medium color toast 3, 4 or 5
Dark color toast 6 or 7
When using the TOAST function for the first
time, we recommend toasting on the
preset browning setting ‘4’ so you can
adjust the browning setting to your
preference - considering the type,
thickness and freshness of the bread.
20
21
BAGEL FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
The BAGEL function crisps the insides of
your cut bagel while only lightly toasting
the outside. This function is also ideal for
toasting crumpets or thick sliced specialty
breads which require one side to be
toasted more than the other.
NOTE:
If you like your bagel halves equally
crisp on both the top and bottom,
we recommend using the TOAST
function to toast your cut bagel.
Insert the wire rack into the middle rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
Slice each bagel into two equal halves.2.
If toasting 1-2 bagel halves, center 3.
the halves on the wire rack. If toasting
3-4 halves, evenly space them with 1-2
halves at the front of the wire rack and
1-2 halves at the back of the rack.
NOTE:
The inside (cut side) of the bagel
must always face upwards towards
the top heating elements. This
allows the cut side to be crisp while
the crust is only lightly toasted.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BAGELOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — TOAST
For example, raisin toast, white
light-textured breads or thinly sliced bread
may require a lighter setting, whilst heavier
textured rye, whole wheat or fresh breads
may require a darker setting.
b) To change the number of slices,
press the center of the TEMP/TIME
(Darkness/Slices) dial until the LCD
screen displays a flashing 'SLICES'.
Turn the dial to the left to reduce
the number of slices, or to the right
to increase the number of slices. The
number of slices range from ‘1’ to ‘4’.
NOTE:
Your customized TOAST browning
setting and number of slices will
remain in the memory of the oven
until you change them or unplug the
oven from the wall outlet. When the
oven is plugged back into the wall
outlet, the TOAST function will
automatically return to the preset
browning setting ‘4’ and preset
number of slices ‘2’.
Press the START/CANCEL button to 6.
activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange.
The timer will be displayed and begin to 7.
count down. The time can be adjusted
during the toasting cycle by turning the
TEMP/TIME dial.
NOTE:
Element IQ™ will automatically
adjust the toasting time depending
on the heat already present inside
the oven. For example, if the oven
is already warm after one cycle of
toasting, the toasting time for the
second cycle will be less.
During the toasting cycle,
condensation may form on the oven
door and steam may be emitted.
This is normal. Condensation
and steam occur as a result
of the moisture content of the
bread. Freshly baked and frozen
breads generally produce more
condensation.
At the end of the toasting cycle, the 8.
oven alert will sound three times. The
START/CANCEL button surround will no
longer illuminate red and LCD screen will
illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
The toasting cycle can be stopped at any 9.
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
!
Close the oven door.4.
Turn the FUNCTION dial until the 5.
indicator reaches the BAGEL function.
The left figure on the LCD screen
indicates the preset browning or
'Darkness' setting '4', while the right
figure on the LCD screen indicates the
preset number of bagel halves '2'.
The browning setting and number of 6.
bagel halves can be adjusted before or
during the bagel cycle.
a)
To change the browning setting,
press the center of the TEMP/TIME
(Darkness/Slices) dial until the
LCD screen displays a flashing
'DARKNESS'.
Turn the dial to the left to reduce the
browning setting, or to the right to
increase the browning setting.
22
23
NOTE:
We recommend using the bottom
rack height position during the
BAKE function. However this is a
guide only. The position of the rack
may vary depending on the type
and size of food being baked. Some
baked goods such as brownies or
pastries may be more suited to the
middle rack height position.
Close the oven door.2.
Turn the FUNCTION dial until the 3.
indicator reaches the BAKE function.
The LCD screen indicates the preset
BAKE temperature of ‘320°F’.
The baking temperature and time 4.
can be adjusted before or during the
baking cycle:-
a) The preset '320°F’ is displayed as
default baking temperature on the
LCD screen. To select the baking
temperature, turn the TEMP/TIME
dial to adjust the baking temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
Press the START/CANCEL button 7.
to activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen
will illuminate orange.
The timer will be displayed and begin to 8.
count down. The time can be adjusted
during the bagel cycle by turning the
TEMP/TIME dial.
NOTE:
During the BAGEL function,
Element IQ™ will automatically
adjust the power of the cooking
elements for optimum results. It is
normal to notice the bottom set of
elements turn off while the top set
is heating at full power. This ensures
the inside of the bagel is crisp while
the crust is only lightly toasted.
NOTE:
Element IQ™ will automatically
adjust the toasting time depending
on the heat already present inside
the oven. For example, if the oven
is already warm after one cycle of
toasting, the toasting time for the
second cycle will be less.
At the end of the cooking cycle, the 9.
oven alert will sound three times. The
START/CANCEL button surround will no
longer illuminate red and LCD screen will
illuminate blue.
NOTE:
The browning settings range from
‘1’ (lightest) to ‘7’ (darkest).
As a general guide:
Desired Bagel Color Setting
Light color bagel 1 or 2
Medium color bagel 3, 4 or 5
Dark color bagel 6 or 7
When using the BAGEL function for the
first time, we recommend toasting on the
preset browning setting ‘4’ so you can
adjust the browning setting to your
preference - considering the type and
freshness of the bagel.
b) To change the number of bagel
halves, press the center of the
TEMP/TIME (Darkness/Slices)
dial until the LCD screen displays
a flashing 'SLICES'.
Turn the dial to the left to reduce the
number of bagel halves, or to the right
to increase the number halves. The
number of bagel halves range from
‘1’ to ‘4’.
NOTE:
Your customized BAGEL browning
setting and number of bagel halves
will remain in the memory of the
oven until you change them or
unplug the oven from the wall outlet.
When the oven is plugged back into
the wall outlet, the BAGEL function
will automatically return to the
preset browning setting ‘4’ and
preset number of bagel halves ‘2’.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BAKEOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BAGEL
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
The bagel cycle can be stopped at any 10.
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
!
BAKE FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Bottom rack height position.
Optional Settings
FROZEN FOODS button.
TEMPERATURE CONVERSION button.
The BAKE function cooks food evenly
throughout. This function is ideal for baking
cakes, muffins, brownies and pastries. The
BAKE function is also ideal for cooking
pre-packaged frozen meals including
lasagna and pot pies.
Insert the wire rack into the bottom 1.
rack height position. The wire rack
should be positioned with the spokes
facing upwards.
24
25
After the PREHEATING alert has 8.
sounded, the timer will automatically
begin to count down in one minute
increments. The temperature and time
can be adjusted during the baking cycle
by turning the the TEMP/TIME dial.
Toggle between the temperature and
time LCD screen by pressing the center
of the TEMP/TIME dial.
At the end of the cooking cycle, the 9.
oven alert will sound three times. The
START/CANCEL button surround will
no longer illuminate red and LCD
screen will illuminate blue.
10.The baking cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
b) To select the baking time, press the
center of the TEMP/TIME dial until the
LCD screen displays the preset baking
time of ':30 MINS’.
Turn the dial to adjust the baking time
in one minute increments up to 1 hour,
and in 5 minute increments between
1 and 2 hours.
NOTE:
Your customized BAKE temperature
and time settings will remain in
the memory of the oven until you
change them or unplug the oven
from the wall outlet.
When the oven is plugged back
into the wall outlet, the BAKE
function will automatically return to
the preset temperature of ‘325°F’
and preset time of ‘:30 MINS’.
Press the START/CANCEL button to 5.
activate this setting. The button surround
will illuminate red, the oven alert will sound
and the LCD screen will illuminate orange.
The LCD screen will indicate a 6.
blinking ‘PREHEATING’. Once the oven
has reached the set temperature, the
temperature alert will sound.
Place food, positioned on the Breville 7.
enamel baking pan or in an oven-proof
dish, on the center of the wire rack so air
flows around the sides of the food.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
NOTE:
The following bakeware will fit into
the oven:
- 7 ½" x 11" baking pan no handles
- 9" square baking pan
- 6 cup muffin tin
- 9" loaf pan
- Up to 11" pie plate
NOTE:
For questions regarding the use of
oven safe and specialty bakeware in
compact ovens, please contact the
bakeware manufacturer directly.
WHEN AT
TEMP.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom rack height
position. This is to minimize the risk
of the metal foil coming into contact
with the top heating elements.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BAKE OPERATING YOUR BREVILLE SMART OVEN™ — BAKE
!
26
27
NOTE:
Your customized ROAST
temperature and time settings will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the ROAST function will
automatically return to the preset
temperature of '350˚F' and preset
time of ‘1:00 HRS’.
Press the START/CANCEL button to 5.
activate this setting. The button surround
will illuminate red, the oven alert will
sound, and the LCD screen will
illuminate orange.
The LCD screen will indicate a blinking 6.
‘PREHEATING’. Once the oven has
reached the set temperature, the
temperature alert will sound.
Place food, positioned on the Breville 7.
enamel baking pan or in an oven-proof
dish, on the center of the wire rack so air
flows around the sides of the food.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
NOTE:
When roasting, the Breville enamel
broil rack may be inserted into
Breville enamel baking pan. When
assembled together, the broil rack
is designed to drain grease and fats
away from meats for healthier
cooking. The baking pan collects
these pan drippings and helps
prevent spattering.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom rack height
position. This is to minimize the risk
of the metal foil coming into contact
with the top heating elements.
OPERATING YOUR BREVILLE SMART OVEN™ — ROASTOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — ROAST
ROAST FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Bottom rack height position.
Optional Settings
TEMPERATURE CONVERSION button.
The ROAST function is ideal for cooking a
variety of meats and poultry that are tender
and juicy on the inside and roasted to
perfection on the outside.
Insert the wire rack into the bottom rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
Close the oven door.2.
Turn the FUNCTION dial until the 3.
indicator reaches the ROAST function.
The LCD screen indicates the preset
ROAST temperature of ‘350°F’.
The roasting temperature and time can be 4.
adjusted before or during the roasting cycle.
a) The preset '350°F' is displayed as
default roasting temperature on the
LCD screen. Turn the TEMP/TIME
dial to adjust the roasting temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
b) To select the roasting time, press
the center of the TEMP/TIME dial until
the LCD screen displays the preset
roasting time of '1:00 HRS'.
Turn the dial to adjust the roasting time
in one minute increments up to 1 hour,
and in 5 minute increments between
1 and 2 hours.
NOTE:
Use the table below as a guide only
to estimate and plan cooking times.
We recommend checking doneness
with a reliable meat thermometer.
Type/Cut
Roasting time
per 1lb (500g)
Beef - Rib Eye, Round or
Rib Roast
30 minutes
Pork - Loin (bone in/out) 35 minutes
Lamb - Leg (bone in/out) 30 minutes
Chicken - Whole 30 minutes
NOTE:
We recommend limiting the weight
of meats and poultry to be roasted
to 4.5 lbs (2kg). However the
actual maximum weight will vary
depending on the type, cut, shape
and size of the meat.
!
28
29
NOTE:
When broiling, the Breville enamel
broil rack must be inserted into the
Breville enamel baking pan. When
assembled together, the broil rack
is designed to drain grease and fats
away from meats for healthier
cooking. The baking pan collects
these pan drippings and helps
prevent spattering.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
BROIL FUNCTION
Elements
Top heating elements cycle on and off to
regulate the correct temperature.
Rack Position
Top rack height position.
Optional Settings
TEMPERATURE CONVERSION button.
The BROIL function is ideal for open
sandwiches, small cuts of meat, poultry,
fish, sausages and vegetables. Broiling
can also be used to brown the tops of
casseroles and gratins.
Insert the wire rack into the top rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
NOTE:
We recommend using the top rack
height position during the BROIL
function. However this is a guide
only. Certain foods may require
the middle rack height position
depending on the recipe, the
amount and size of the food and
your personal taste.
For example, the middle rack height
position may be more appropriate
for taller foods that may touch
the heating elements, thicker
foods such as hamburger patties,
marinated foods such chicken
wings, or foods that require a
gentle broil.
We recommend experimenting with
the rack height position, as well as
the temperature and time settings to
produce the desired results.
Insert the Breville enamel broil rack into 2.
the enamel baking pan. Place food on
the assembled broil rack or in an
oven-proof dish, then place on the center
of the wire rack so air flows around the
sides of the food.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BROILOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BROIL
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
After the PREHEATING alert has 8.
sounded, the timer will automatically
begin to count down in one minute
increments. The temperature and time
can be adjusted during the roasting
cycle by turning the TEMP/TIME dial.
Toggle between the temperature and
time LCD screen by pressing the center
of the TEMP/TIME dial.
At the end of the cooking cycle, the oven 9.
alert will sound three times. The START/
CANCEL button surround will no longer
illuminate red and LCD screen will
illuminate blue.
NOTE:
Check doneness with a reliable
meat thermometer. Use an
independent timer to remind you to
check the meat temperature.
The roast cycle can be stopped at any 10.
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
30
31
Close the oven door.3.
ALWAYS ENSURE THE OVEN
DOOR IS COMPLETELY
CLOSED WHEN USING THE
BROIL FUNCTION.
Turn the FUNCTION dial until the 4.
indicator reaches the BROIL function.
The LCD screen indicates the preset
BROIL temperature of ‘HI’.
The broiling temperature and time can 5.
be adjusted before or during the broiling
cycle.
a) The preset 'HI’ is displayed as
default broiling temperature on the
LCD screen. To select the broiling
temperature, turn the dial to select
either ‘HI’ (high) or ‘LO’ (low).
NOTE:
The two preset broiling temperatures
allow you to change the broiling
speed – how quickly the tops of your
food brown - depending on the food
to be broiled, quantity of food & your
personal taste. While we suggest
most foods should be broiled using
the preset 'HI', we recommend
experimenting with the broiling
temperature and time settings to
produce the desired results.
NOTE:
Your customized BROIL
temperature and time settings will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the BROIL function will
automatically return to the preset
temperature of 'HI', and preset time
of ‘:10MINS’.
Press the START/CANCEL button to 6.
activate this setting. The button surround
will illuminate red, the oven alert will
sound, and the LCD screen will
illuminate orange.
The timer will be displayed and 7.
begin to count down in one minute
increments. The temperature and time
can be adjusted during the broiling
cycle by turning the TEMP/TIME dial.
Toggle between the temperature and
time LCD screen by pressing the center
of the TEMP/TIME dial.
NOTE:
Depending on the food being
broiled, it may be necessary to
turn food over half way through
the cooking time to achieve even
cooking and browning.
At the end of the cooking cycle, the oven 8.
alert will sound three times. The START/
CANCEL button surround will no longer
illuminate red and LCD screen will
illuminate blue.
b) To select the broiling time, press the
center of the TEMP/TIME dial until the
LCD screen displays the preset broiling
time of ':10 MINS'.
Turn the dial to adjust the broiling
time in one minute increments up
to a maximum of 20 minutes.
Type/Cut Weight /
thickness
Broiling
time
Beef
Sirloin
Hamburger
1" (2.5cm)
1" (2.5cm)
12-15 mins
10-15 mins
Pork
Chops
Ribs
Bacon
1" (2.5cm)
1 rack
3 rashers
15 mins
20 mins
10 mins
Lamb
Neck chops
Cutlets
4 pieces
8 pieces
15 mins
10-12 mins
Sausages
Thin
Thick
8 pieces
6 pieces
8 mins
12 mins
Chicken
Wings
Breast or
Thigh
1lb (500g)
0.5lbs (250g)
12-15 mins
20 mins
Fish 0.5lbs (250g)
1lb (500g)
8 mins
8-10 mins
Cheese Melt
3-5 mins
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — PIZZAOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — BROIL
!
PIZZA FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
TEMPERATURE CONVERSION button
FROZEN FOODS button
The PIZZA function melts and browns
cheese and toppings, while crisping the
pizza crust.
Insert the wire rack into the middle rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
Close the oven door.2.
!
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
The broiling cycle can be stopped at any 9.
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
32
33
NOTE:
Your customized PIZZA
temperature and time settings will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the PIZZA function will
automatically return to the preset
temperature of ‘450°F’, preset time
of ':15 MINS' and preset FROZEN
FOODS setting.
Press the START/CANCEL button to 5.
activate this setting. The button surround
will illuminate red, the oven alert will
sound, and the LCD screen will
illuminate orange.
The LCD screen will indicate a blinking 6.
‘PREHEATING’. Once the oven has
reached the set temperature, the
temperature alert will sound.
Place the pizza pan or pizza on the 7.
wire rack so air flows around the sides
of the food.
NOTE:
Pizza pan color, size, and thickness
can affect browning/crispiness of
the pizza base.
b) To select the cooking time, press
the center of the TEMP/TIME dial until
the LCD screen displays the preset
cooking time of ':15 MINS'.
Turn the dial to adjust the cooking time
in one minute increments up to 1 hour,
and in 5 minute increments between 1
and 2 hours.
NOTE:
The cooking technology in The
Compact Smart Oven(TM) allows
foods to cook more evenly and
quickly, significantly reducing
cooking times. The oven’s preset
cooking temperatures and times,
as well as the cooking temperature
and time directions on pre-packaged
foods, may need to be changed
depending on the recipe, the amount
of food and your personal taste.
We recommend experimenting with
the temperature and time settings to
produce the desired results.
NOTE:
Due to the wide variety of pizzas
available, you will need to consider
whether you are cooking a fresh or
frozen pizza or a thin crust or deep
dish, and adjust the cooking time to
produce the ideal result.
For example, frozen pizzas may
need additional cooking time.
Thick crust pizzas may also require
slightly more cooking time.
OPERATING YOUR BREVILLE SMART OVEN™ — PIZZAOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — PIZZA
NOTE:
We recommend using the middle
rack height position during the
PIZZA function. However this is a
guide only. The position of the rack
may vary depending on the type and
size of the pizza. Some fresh pizza's
may be more suited to the bottom
rack height position.
We recommend experimenting with
the rack height position, as well as
the temperature and time settings to
produce the desired results.
Turn the FUNCTION dial until the 3.
indicator reaches the PIZZA function.
The LCD screen indicates the preset
PIZZA temperature of ‘450°F’.
The preset FROZEN FOODS setting
will also be displayed (see Page 34 if
cooking fresh pizza).
The pizza cooking temperature and time 4.
can be adjusted before or during the
cooking cycle.
a) The preset cooking temperature of
425°F is displayed as the default on
the LCD screen. Turn the TEMP/TIME
dial to adjust the cooking temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
NOTE:
If cooking a frozen pizza, ensure
to remove all packaging, including
cardboard, plastic, paper, or other
flammable materials before placing
the pizza in the oven.
Use a pizza pan when cooking a
pizza. It is not recommended to
cook pizzas directly onto the wire
rack as melted cheese and other
ingredients may come into contact
with elements and create a potential
fire risk.
Oven accessories available at
breville.com.
After the PREHEATING alert has 8.
sounded, the timer will automatically
begin to count down in one minute
increments. The temperature and time
can be adjusted during the cooking cycle
by turning the TEMP/TIME dial. Toggle
between Temperature and Time by
pressing the TEMP/TIME button.
NOTE:
Some large pizzas may brown
unevenly in compact ovens. Open
the oven door half way through the
cooking time and carefully rotate
the pizza 90 degrees for more
even browning.
34
35
The baking temperature and time can 4.
be adjusted before or during the baking
cycle.
a) The preset baking temperature of
350˚F is displayed as the default on
the LCD screen. Turn the TEMP/TIME
dial to adjust the baking temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
b)
To select the baking time, press the
center of the TEMP/TIME dial until the
LCD screen displays the preset baking
time of : '11 MINS'.
Turn the dial to adjust the cooking
time in one minute increments up to
a maximum of 1 hour.
NOTE:
Due to the wide variety of cookie
types, you will need to consider
whether you’re baking fresh,
refrigerated or frozen cookie dough,
and adjust the baking time to
produce the ideal result.
For example, frozen cookie dough
may need additional baking time.
The amount of dough per cookie or
the thickness of the cookie many
also vary the cooking time.
At the end of the cooking cycle, the 9.
oven alert will sound three times, the
START/CANCEL button will cease to
illuminate and the LCD back light will
illuminate blue.
NOTE:
Be sure to use protective hot pads
or insulated ovens mitts when
removing the pizza from the oven
as melted cheese and toppings will
be hot.
The pizza cycle can be stopped at any 10.
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go
out and the LCD screen will
illuminate blue.
A note on pizza stones
When using a pizza stone, it is necessary
to first heat the stone (without a pizza) for
optimum results.
Insert the wire rack into the middle rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
Place the pizza stone on the center of 2.
the wire rack so air flows around the
sides of the stone.
Close the oven door.3.
Press the START/CANCEL button 4.
to activate this setting. The button
surround will illuminate red, the oven
alert will sound, and the LCD screen
will illuminate orange.
The LCD screen will indicate a blinking 5.
‘PREHEATING’. Once the oven has
reached the set temperature, the
temperature alert will sound.
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — COOKIEOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — PIZZA
COOKIE FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
The top middle element is off.
Rack Position
Middle rack height position.
Optional Settings
TEMPERATURE CONVERSION button
FROZEN FOODS button
The COOKIE function is ideal for baking
homemade or commercially prepared
cookies and other baked treats.
Ready-to-bake crescent rolls, cinnamon
scrolls, biscuits and strudels are ideally
baked using this function.
Insert the wire rack into the middle rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
Close the oven door.2.
Turn the FUNCTION dial until the 3.
indicator reaches the COOKIE function.
The LCD screen indicates the preset
temperature of ‘350°F’.
The timer will be displayed and 6.
automatically begin to count down in
one minute increments.
At the end of the pizza stone heating 7.
cycle, the oven alert will sound three
times, the START/CANCEL button will
cease to illuminate and the LCD back
light will illuminate blue.
Now carefully place the frozen pizza on 8.
the heated pizza stone.
NOTE:
If cooking a fresh pizza, we
recommend using protective hot
pads or insulated oven mitts to
remove the entire wire rack with
pizza stone, and place on the open
oven door or bench. This will assist
in transferring the fresh pizza dough
onto the heated pizza stone. Always
use protective hot pads or insulated
oven mitts to re-insert the wire rack
with pizza stone and pizza, inside
the oven.
Select the desired pizza setting and 9.
press the START/CANCEL button to
restart the pizza cycle.
36
37
NOTE:
Your customized COOKIE
temperature and time settings will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the COOKIE function will
automatically return to the preset
temperature of ‘350°F’, and preset
time of ':11 MINS'.
Press the START/CANCEL button 5.
to activate this setting. The button
surround will illuminate red, the oven
alert will sound, and the LCD screen
will illuminate orange.
The LCD screen will indicate a blinking 6.
‘PREHEATING’. Once the oven has
reached the set temperature, the
temperature alert will sound.
Place food on the Breville enamel baking 7.
pan or in an oven-proof dish, then place
on the center of the wire rack so air flows
around the back, as well as the front of
the food.
After the PREHEATING alert has 8.
sounded, the timer will automatically
begin to count down in one minute
increments. The temperature and time
can be adjusted during the baking cycle
by turning the TEMP/TIME dial. Toggle
between Temperature and Time by
pressing the TEMP/TIME button.
At the end of the baking cycle, the oven 9.
alert will sound three times, the START/
CANCEL button will cease to illuminate
and the LCD screen will illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
The baking cycle can be stopped at any 10.
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
REHEAT FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
The top middle element is off.
Rack Position
Bottom rack height position.
Optional Settings
TEMPERATURE CONVERSION button
The REHEAT function is ideal for reheating
leftovers without browning.
Insert the wire rack into the bottom rack 1.
height position. The wire rack should
be positioned with the spokes facing
upwards.
Place food on the Breville enamel baking 2.
pan or in an oven-proof dish, then place
on the center of the wire rack so air flows
around the sides of the food.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
It may be necessary to lightly grease
or line the enamel baking pan with
baking paper to prevent cookies
from sticking.
NOTE:
Caution should be exercised
when using metal foil to cover
accessories, pans, and dishes.
Be sure that the metal foil is fitted
securely as close contact with the
oven's heating elements can cause
overheating and risk of fire.
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ — REHEATOPERATING YOUR BREVILLE COMPACT SMART OVEN™ — COOKIE
!
WHEN AT
TEMP.
38
39
The reheating temperature and time 5.
can be adjusted before or during the
reheating cycle.
a) The preset reheating temperature of
330˚F is displayed as the default on
the LCD screen. Turn the TEMP/TIME
dial to adjust the cooking temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
b) To select the reheating time, press
the center of the TEMP/TIME dial until
the LCD screen displays the preset
reheating time of ':15 MINS'.
Turn the dial to adjust the cooking
time in one minute increments up to
a maximum of 1 hour.
NOTE:
Your customized REHEAT
temperature and time settings will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the REHEAT function will
automatically return to the preset
temperature of ‘325°F’, preset time
of ‘:15 MINS’.
OPERATING YOUR BREVILLE SMART OVEN™ — REHEATOPERATING YOUR BREVILLE SMART OVEN™ — REHEAT
Press the START/CANCEL button 6.
to activate this setting. The button
surround will illuminate red, the oven
alert will sound, and the LCD screen
will illuminate orange.
The timer will be displayed and begin to 7.
count down in one minute increments.
The temperature and time can be
adjusted during the reheating cycle by
turning the corresponding
TEMP/TIME dial.
At the end of the reheating cycle, 8.
the oven alert will sound three times,
the START/CANCEL button will
cease to illuminate and the LCD back
light will illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS WHEN
INSERTING, REMOVING OR HANDLING ITEMS FROM
THE OVEN.
The reheating cycle can be 9.
stopped at any time by pressing the
START/CANCEL button. This will
cancel the cycle. The button surround
illumination will go out and the LCD
screen will illuminate blue.
!
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
Close the oven door.3.
Turn the FUNCTION dial until the 4.
indicator reaches the REHEAT function.
The LCD screen indicates the preset
temperature of '330°F'.
40
41
USING THE PLATE
WARMING TRAY
of your Breville Compact Smart Oven™
The top of the oven is very hot during and
after operation. Do not store any item on
top of the oven when in operation.
The only exceptions are:
One layer of ceramic plates for warming.•
The optional Bamboo Cutting Board •
and Serving Tray accessory provided
by Breville for use in the ribbed section
on top of the oven. Visit breville.com.
for more information and refer to the
Accessories Card enclosed.
THE USE OF ANY ACCESSORY
ATTACHMENTS NOT
RECOMMENDED BY BREVILLE
MAY CAUSE INJURIES.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS OR
INSULATED OVEN MITTS WHEN
INSERTING, REMOVING OR
HANDLING ITEMS FROM THE
OVEN. ALTERNATIVELY, ALLOW
THE OVEN TO COOL DOWN
BEFORE HANDLING.
!
!
USING THE PLATE WARMING TRAY
42
43
CARE & CLEANING YOUR BREVILLE COMPACT SMART OVEN™
CARE & CLEANING
your Breville Compact Smart Oven™
Ensure the oven is turned OFF by pressing
the START/CANCEL button on the control
panel. The oven is OFF when the button
surround illumination is no longer red.
Remove the power plug from the wall
outlet. Allow the oven and all accessories
to cool completely before disassembling
and cleaning.
NOTE:
Do not use abrasive cleansers,
metal scouring pads or metal
utensils on any of the interior or
exterior surfaces of the oven,
including the crumb tray.
Do not use abrasive cleansers,
metal scouring pads or metal
utensils to clean any of the
accessories as they may damage
the porcelain enamel finish of the
baking pan and broiling rack.
Cleaning the outer body and door
Wipe the outer body with a soft, damp 1.
sponge. A non-abrasive liquid cleanser or
mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the oven surface, before
cleaning.
To clean the glass door, use a glass 2.
cleaner or mild detergent and a soft,
damp sponge or soft plastic scouring
pad. Do not use an abrasive cleanser or
metal scouring pad as these will scratch
the oven surface.
Let all surfaces dry thoroughly prior to 3.
inserting the power plug into a wall outlet
and turning the oven ON.
DO NOT IMMERSE THE BODY,
POWER CORD OR POWER PLUG
IN WATER OR ANY OTHER
LIQUID AS THIS MAY CAUSE
ELECTROCUTION
Cleaning the interior
The walls on the inside of the oven 1.
feature a non-stick coating for easy
cleaning. To clean any spattering that
may occur while cooking, wipe the
walls with a soft, damp sponge.
A non-abrasive liquid cleanser or mild
spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the oven surface, before
cleaning. Avoid touching the quartz
heating elements.
USE EXTREME CAUTION WHEN
CLEANING THE QUARTZ
HEATING ELEMENTS. ALLOW
THE OVEN TO COOL
COMPLETELY, THEN GENTLY
RUB A SOFT, DAMP SPONGE OR
CLOTH ALONG THE LENGTH OF
THE HEATING ELEMENT. DO NOT
USE ANY TYPE OF CLEANSER
OR CLEANING AGENT. LET ALL
SURFACES DRY THOROUGHLY
PRIOR TO INSERTING THE
POWER PLUG INTO A WALL
OUTLET AND TURNING THE
OVEN ON.
Let all surfaces dry thoroughly prior to 2.
inserting the power plug into a wall outlet
and turning the oven ON.
!
!
44
CARE & CLEANING YOUR BREVILLE COMPACT SMART OVEN™
Cleaning the crumb tray
After each use, slide out the crumb tray 1.
and discard crumbs. Wipe the tray with a
soft, damp sponge. A non-abrasive liquid
cleanser may be used to avoid build-up
of stains. Apply the cleanser to the
sponge, not the tray, before cleaning.
Dry thoroughly.
To remove baked-on grease, soak the 2.
tray in warm soapy water then wash with
a soft sponge or soft plastic scouring
pad. Rinse and dry thoroughly.
Always ensure to re-insert the crumb tray 3.
into the oven after cleaning and prior to
inserting the power plug into a wall outlet
and turning the oven ON.
Cleaning the wire rack, broil rack,
and baking pan.
Wash all accessories in warm soapy 1.
water with a soft sponge or soft plastic
scouring pad. Rinse and dry thoroughly.
To extend the life of your accessories, we 2.
do not recommend that these be placed
in the dishwasher.
Storage
Ensure the oven is turned OFF by 1.
pressing the START/CANCEL button on
the control panel. The oven is OFF when
the button surround illuminationis no
longer red. Then remove the power plug
from the wall outlet.
Allow the oven and all accessories to 2.
cool completely.
Ensure the oven and all accessories are 3.
clean and dry.
Ensure the crumb tray is inserted into the 4.
oven, the broil rack is inserted into the
baking pan and resting on the wire rack
in the middle rack height position.
Ensure the door is closed.5.
Store the appliance in an upright position 6.
standing level on its support legs. Do not
store anything on top.
Loading...