Breville BEF450 User Manual

Breville Customer Service Centre

Australian Customers
Mail: PO Box 22

Botany NSW 2019
AUSTRALIA

Phone: [phone]
Fax: [phone]

Customer Service:

Email:

[e-mail]

www.breville.com.au

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Due to continued product improvement, the products illustrated/photographed

in this brochure may vary slightly from the actual product.

Copyright Breville Pty. Ltd. 2010.

New Zealand Customers
Mail: Private Bag 94411

Botany Manukau 2163
Auckland NEW ZEALAND

Phone:

0800 273 845

Fax: [phone]

Customer Service:

Email:

[e-mail]

BEF450 Issue - A11

the Thermal Pro Non-stick

Instruction Booklet

™

BEF450

CONGRATULATIONS

on the purchase of your new

Breville Thermal Pro Non-stick

™

CONTENTS

4 Breville recommends safety first

6 Know your Thermal Pro

Non-stick™

8 Operating your Thermal Pro

Non-stick™

11 Care & cleaning

14 Cooking techniques & tips

19 Recipes

3

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE

• Do not place frypan near the edge of a

bench or table during operation. Ensure
the surface is level, clean and free of
water.

• Remove any promotional stickers before

using the frypan for the first time.

• Do not place the frypan on or near a hot

gas or electric burner, or where it could
touch a heated oven. Place frypan at
least 20cm away from walls and curtains.

• Do not use on metal surfaces, for

example, a sink drain board.

• Always insert Temperature Control

Probe into probe socket and ensure is
fully inserted, before inserting power
plug into power outlet and switching
on appliance. Ensure the probe socket
is completely dry before inserting the
Temperature Control Probe.

• Ensure the cord is not touching the hot

pan.

• To protect against electric shock, do not

immerse cord or Temperature Control
Probe in water or any other liquid.

• Ensure the Temperature Control Probe

has cooled before removing from the
appliance.

• Always remove Temperature Control

Probe before cleaning the appliance.

• Only the Temperature Control Probe

included with the frypan must be used.

• If using plastic utensils, do not leave in

frypan when hot.

• Never immerse cord and/or heat probe

in water or any other liquid.

• Do not place hot glass lid under cold

water.

• Extreme caution must be used when

the appliance contains hot oil or other
liquid. Do not move the appliance
during cooking. Allow the frypan to cool
before removing oil or other liquid.

• Place frypan at least 200mm away from

walls and curtains.

• Do not touch hot surfaces.

• Do not leave the appliance unattended

when in use.

• Always turn the Temperature Control

Probe to the large dot, then switch off
at the power outlet and allow probe to
cool, then remove probe and unplug, if
appliance is to be left unattended, if not
in use and before cleaning.

• Keep the appliance clean. Follow the

cleaning instructions provided in this
book.

• Always use the appliance on a dry, level

surface.

4

BREVILLE RECOMMENDS SAFETY FIRST

IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES

• Unwind the cord before use.

• Do not let the cord hang over the edge of

a table or counter, touch hot surfaces, or
become knotted.

• This appliance is not intended for use

by young children or infirm persons
without supervision.

• Young children should be supervised

to ensure that they do not play with the
appliance.

• The appliance is not intended to be

operated by means of an external timer
or a separate remote-control system.

• It is recommended to inspect the

appliance regularly. Do not use the
appliance if power supply cord, plug,
probe or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.

• Any maintenance other than cleaning

should be performed at an authorised
Breville Service Centre.

• This appliance is for household use only.

Do not use this appliance for other than
its intended use.

• Do not use in moving vehicles or boats.

Do not use outdoors.

• The installation of a residual current

device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.

• Do not place this appliance on or near

a hot gas or electric burner, or where it
could touch a heated oven.

• Always switch appliance off, then switch

off at the power outlet, then unplug
the appliance when not in use, before
attempting to move appliance and
before cleaning.

SAVE THESE
INSTRUCTIONS

5

5

KNOW

your Thermal Pro Non-stick

™

KNOW YOUR THERMAL PRO NON-STICK™

A C D

B

K

FE

G

IH

J

A. Large 39(L) x 31(W) x 7.8(H)cm

banquet shaped frypan

Dishwasher safe.

B. Toughened glass high domed lid

Dishwasher safe.

C. Steam vent hole

Suitable size for insertion of meat probe.

D. Cast stainless steel handles
E. Cast-in butterfly element

2400 watts of power, provides even
distribution of heat over the entire
cooking surface.

F. Premium non-stick cooking surface

For Easy Cleaning.

G. Non-slip feet
H. Pan tilt lever
I. Precise variable temperature control

With 15 heat settings including SEAR.

J. Trivet

For steaming and roasting.

K. Pouring Spout

7

OPERATING

your Thermal Pro Non-stick™

OPERATING YOUR THERMAL PRO NON-STICK™

BEFORE FIRST USE

Remove any promotional materials and
packaging materials before use. Wash your
frypan and lid in hot soapy water. Rinse and
dry thoroughly.

Do not immerse the cord, plug and/or
Temperature Control Probe in water or any
other liquid.

1. Insert the Temperature Control Probe

into the probe socket on the appliance.
Plug into a 230/240V power outlet and
switch ‘On’. Always insert the probe into
the appliance first, then insert plug into
power outlet.

NOTE

Before inserting the Temperature
Control Probe into the probe socket,
ensure the interior of the socket is
completely dry. To do this, shake out
excess water then wipe the interior of
the socket with a dry cloth.

2. Turn the dial on the Temperature

Control Probe clockwise to the desired
setting. The red heating light on the
probe will illuminate.

3. The red heating light will remain

illuminated until the frypan reaches
the desired temperature. Once the
temperature has been reached, the red
light will cycle ‘On’ and ‘Off’ during
cooking to maintain the desired
temperature.

4. When cooking is completed, turn the

dial anti clock-wise until the large dot is
aligned with the red heating light.

Switch off at the power outlet and unplug.

5. Leave the Temperature Control Probe

connected to the appliance until cool.

NOTE

This frypan must be used with the
Temperature Control Probe provided.
Do not use any other probe or
connector.

Cooking

Off

9

OPERATING YOUR THERMAL PRO NON-STICK™

RECOMMENDED HEAT CONTROL
PROBE SETTINGS

DIAL SETTING USES

2-6

6-8

8-12

12-14 • Sealing steaks and

14 • High Sear

• Keeping food warm

• basting

• Slow cooking e.g.

casseroles, curries
and soups

• Cooking roasts

• Browning nuts

• Shallow frying

• Pancakes and

crepes

• Rice and pasta

roasts

• Cakes and self

saucing puddings

10

CARE & CLEANING

for your Thermal Pro Non-stick

™