Bravetti BP100 User Manual

Food Processor with Blender

Use and Care Instruction Manual

Model BP100

Read Instruction Manual Before Use

EURO-PRO Operating LLC

Boston, MA, 02465

1 [phone]

www.euro-pro.com

IMPORTANT SAFEGUARDS

Read Instruction Manual Before Use

When using electrical appliances, basic safety precautions should always be followed, including the
following:

1. Read all instructions before using the appliance. It is suggested that you keep these instructions
in a safe place for future reference.

2. Your voltage must correspond to the voltage printed on the bottom of the appliance.

3. To protect against electrical shock, do not immerse the motor housing (base), cord, or plug in
water or other liquid.

4. Close supervision is necessary when the appliance is used by or near children.

5. Unplug appliance from outlet when not in use, before putting on or taking off parts and before
cleaning.

6. Avoid touching moving parts at all times.

7. Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner. Return the appliance to the nearest service facility
for examination, repair, electrical or mechanical adjustment.

8. The use of attachments including canning jars not recommended by the manufacturer may
cause fire, electric shock or injury to persons.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter or touch hot surfaces.

11. Keep hands and utensils away from moving blades or discs while processing food to reduce the
risk of severe injury to persons or damage to the food processor. A scraper may be used but must
be used only when the food processor is not running.

12. Blades are sharp. Handle carefully. When handling the chopper blade (C) always hold it by the
plastic hub.

13. To reduce the risk of injury, never place cutting blades or discs on the base without first putting
bowl properly in place.

14. Be certain cover is securely locked in place before operating appliance.

15. Never feed food by hand. Always use food pusher.

16. Do not attempt to by-pass the cover interlock mechanism.

17. Always operate blender with the cover in place.

18. When blending hot liquids, remove center piece of two-piece cover.

IMPORTANT NOTICE

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical
shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

REV. 06/02C

Congratulations! As the owner of a new Bravetti Food Processor, you are about to use a very
versatile and powerful kitchen appliance that will quickly become an indispensable item in
your kitchen. Bravetti products are engineered to meet the highest quality standards and are
designed to offer the ultimate in ease of operation and convenience.

IMPORTANT INFORMATION

Please read all the following instructions carefully.

IMPORTANT

For your protection, the Bravetti Food Processor has a double safety switch so that it cannot
run unless the food processor lid (13) is locked in place and either the safety cover (2) or the
blender (8) is also locked in place.

PLEASE NOTE

A. To remove safety cover (2) or Blender (8), you must first remove the processor lid (13).
B. To operate the food processor, the safety cover (2) must be properly locked in place.
C. To operate the blender (8), processor lid (13) must be locked in place.
D. When operating blender (8) make sure that all attachments are first removed from the food

processor bowl (11).
E. Do not attempt to use both blender and food processor at the same time.
F. Do not attempt to by-pass the cover (2) safety interlock mechanism or the main lid

interlock.

To remove the
blender, you must
first unlock and
remove the
processor lid (A).
Then unlock and
remove the
blender (B) by
twisting clockwise.

IMPORTANT: Remove chopping blade

protective cover before use. Chopping
blade protective cover is to be used
only for storage.

WARNING:

Always remove
the blender and fit
the safety cover
(2) into the
processor body
when using the
processor.

1

Food Processor with Blender

Voltage: 120V., 60 Hz

Wattage: 800 Watts

MAIN COMPONENTS AND ACCESSORIES

1. Processor Body

2. Safety Cover

3. Safety Cover/Blender
Location

4. On/Off Speed Control Dial

5. Pulse Button

6. Drive Shaft

7. Storage Compartment

8. Blender

9. Blender Lid

10. Measuring Cap

11. Processor Bowl

12. Spindle

13. Processor Lid

14. Food Pusher

15. Storage Dome

16. Spatula

17. Blade Holder

18. Fine Shredding Blade

19. Coarse Shredding Blade

20. Coarse Slicing Blade

21. Fine Slicing Blade

22. French Fry Blade

23. Chopping Blade

24. Chopping Blade
Protective Cover

25. Plastic Dough Blade

26. Whisk Head

27. Whisk Beater

28. Juice Extractor/Filter

29. Juice Extractor Lid

30. Juice Extractor Pusher

31. Citrus Juice Filter

32. Juice Reamer

33. Shredding / Grating Blade

34. Whipping Attachment

33

34

2

STORAGE

The Bravetti food processor
is designed so that most of
the attachments can be
stored on-board.

Storage Compartment

1. Lift the lid of the storage
compartment (7).

2. Place whisk head (26) in
storage compartment as
shown.

Storage Dome

1. Fit the processor bowl (11)
& processor lid (13) onto
the processor base.

2. Place the the storage
dome (15) onto the
processor lid.

3. Add the spindle (12) into
the circular hole in the
storage dome.

3. Place the protective cover
(24) onto the chopping
blade (23) and place into
storage compartment. The
highest part of the blade
should be placed at the
back of the compartment.

4. Push shaft of whisk beater
(27) firmly into the hole.

5. Close the lid of the storage
compartment.

Spatula Storage

Slide the spatula (16) into the
slot provided on the side of
the processor body (1).

4. Place the plastic blade
holder (17) & French fry
blade(22) into the two
longer slots.

5. Add the slicing blades
(20, 21) & the shredding
blades (18, 19) into their
slots in the storage dome.

Cord Storage

The power supply cord can
be stored by feeding it into
the opening at the back of
the food processor body.

3