Bravetti BB301 User Manual

OWNER’S MANUAL

Model BB301
120V~, 60Hz., 550 Watts

Electronic Blender

COPYRIGHT © EURO-PRO OPERATING LLC 2008

EURO-PRO Operating LLC

Boston, MA, 02465

1 [phone]

www.euro-pro.com

Printed in China

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be
followed, including the following:

READ AND KEEP ALL INSTRUCTIONS.

• To protect against risk of electrical shock, do not put blender base
in water or other liquid.

• Close supervision is necessary when any appliance is use d by
or near children, or incapacitated persons.

• Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.

• Avoid contact with moving parts.

• DO NOT operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or is dropped or damaged in
any manner. Return to Brave tti for examination, repair,
or electrical or mechanical adjustment.

• The use of attachments, including canning or ordinary jars
and processing assembly parts not rec o mmended by Bravetti
may cause a risk of injury to persons.

• Keep hands and utensils out of container while blending to prevent
the possibility of severe injury to persons and/or damage to the
blender. If scraping, folding, etc., is necessary, turn off and unplug
the blender, and only use a rubber spatula.

• Blades are sharp. Handle carefully.

• To red uce risk of injury to pe rsons, never place cutting blades
on base without blender container properly attached.

• Screw on container bottom firmly. Injury can result if moving blades
become exposed.

• Always operate blender with cover in place.

• Do Not Use Outdoors

• Do Not Allow Cord to Hang Over Edge of Table or Counter

• When Blending Hot Liquids, Remove Center Piece of Two Piece Cover.

This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

1

07/02A

2

BLENDER PARTS AND CARE

f

ASSEMBLING YOUR BLENDER

BLENDER PARTS AND CARE

COVER

The cover for your blender consists of two parts, the plastic feeder
cap and the vinyl cover. The cover is self-sealing, and is made o
vinyl which is resistant to absorption of odors and stains. The
feeder cap is removable for use as a measuring cup and provid es an
opening for the addition of other ingredients.

CONTAINER

The container for the blender is graduated for easy measurement
and is made of glass. The convenient handle and pouring lip permit
easy removal of liquid mixtures while thicker mixtures are more
easily removed through the bottom opening. The glass jar is
marked with indicators for convenient measuring.

PROCESSING ASSEMBLY

The processing assembly consists of three parts: a sealing ring used
as a cushion between the container and the agitator; agitator of
high-grade stainless steel; a threaded container bottom.

MOTOR AND MOTOR BASE

The powerful multi-speed motor is the heart of the appliance and is
designed just for this unit. It is completely enclosed within the
housing.

CAUTION:

mount blender container quickly and correctly.

Follow these important steps to assemble, tighten, and

INJURY MAY

RESULT IF MOVING BLADES ARE EXPOSED.

1. Turn container up-side down so the small opening is at the top.

2. Make sure that the sealed ring on container opening is tight.

HOW YOUR BRAVETTI BLENDER WORKS

Your blender is a multi-speed appliance which operates on a wide
range of speeds from very slow to very fast. This range of speeds
makes food preparation easy, interesting and also saves time because
your blender processes foods in seconds.

ALWAYS HOLD CONTAINER WITH ONE HAND WHILE
PROCESSING

!

LOW SPEED MODES includes PUREE, WHIP and MIX functions.
HIGH SPEED MODES include GRATE, BLEND and LIQUEFY
functions. By touching the control buttons, you can get the speed
mode you need.

Another choice is PULSE to crush ice.

1. Follow assembly steps as described above.

2. Fill container with 2 cups of ice cubes.

3. Place lid assembly on container.

4. Spin the knob to the ICE CRUSH/PULSE position.

5. Ice can be crushed by continuously spinning the knob until
desired consistency is reached.

6. Let go of the knob and let it revert to the OFF position
automatically. Unplug appliance.

7. Remove container from blender base.

3

4