Braven Stryde XL User Manual

USER GUIDE

GET TO KNOW YOUR BRAVEN

RESET

BAT TER Y STATU S BUT TO N

EXTERNAL USB
CHARGING PORT

BAT TER Y STATU S LED

BRAVEN CHARGING PORT

3.5 MM AUDIO-IN JACK

V O L U M E U P ,

SKIP TRACK (press and hold)

VOICE CONTROL,

ANSWER / END CALL

VOLUME DOWN,

SKIP BACK (press and hold)

PLAY / PAUSE

BLUETOOTH PAIRING

POWER ON / OFF

ENGLISH | 2

POWER AND BLUETOOTH® PAIRING

1. Press the Power button for 2-3 seconds to turn your BRAVEN STRYDE XL™ on / off.

2. Activate Bluetooth® in the settings of your mobile device (check the

user manual of your device for further instruction).

3. Press and hold the Bluetooth® pairing button for 2-3 seconds until the audio cue signals.

4. Select BRAVEN STRYDE XL™ in your device’s Bluetooth® settings to establish the connection.

5. Cancel Bluetooth® pairing mode by pressing the Bluetooth® button until the audio cue signals.

Your BRAVEN STRYDE XL
Bluetooth® device menu to re-connect.

NOTE: If your BRAVEN is powered on with an inactive Bluetooth

power off. Turn your BRAVEN on again by holding the power button for 2-3 seconds until you hear the audio cue.

™

remembers the last eight devices it paired with. Tap BRAVEN STRYDE XL™ in your

®

connection for 30 minutes, it will automatically

VOLUME AND PLAYBACK CONTROL

Increase volume by short pressing the “+” button or decrease volume by pressing the “–” button. An audio cue will
indicate when you’ve reached max volume.

Skip to the next trap by long pressing the “+” button or play the previous track by long pressing the “–” button.

ENGLISH | 3