Brandt AD995XC Use Manual Installation Instruction
AD995XC
COOKER HOOD
USE MANUAL
INSTALLATION INSTRUCTION
Table of Contents
•
From the Manufacturer 3
•
Specifications 4
•
SAFETY : Read this first ! 5
•
Description of Parts 7
•
Ducted vs. Recirculation version 8
•
Installation
Wall drilling and bracket fixing 9
Mounting the hood body 11
Connections 11
Chimney assembly 13
•
Cleaning & Maintenance 13
•
Operation 14
•
Troubleshooting 15
•
Schematic Diagram 15
2
Troubleshooting
Schematic Diagram
Symptoms Possible Cause Action
Ensure the plug
Motor does not No electrical supply is connected properly.
working
Reset circuit breaker.
Aluminum Clean the filters and
Poor airflow filters clogged replace when dry
Charcoal filters Replace the new
clogged charcoal filters
Motor running but Butterfly valve Contact technician
no airflow jammed
High temperature The kitchen is not
Motor cuts after a safety device activated. sufficiently ventilated.
few minutes
The hood is installed too The hood must be at
near the cooking stove. least 75cm from stove.
Oil dripping onto Aluminum filter Wash the aluminum
stove saturated. filters.
Whirring sound
Foreign object in contact Contact technician.
with fan blade.
Lamps do not Lamps are burnt out. Change the lamps.
light up
Lamps are loose. Tighten the lamps.
15
Loading...