Brady B-7646 Catalog Page

THT Label Materials

PermaSleeve® Wire Marking Sleeves

B-7646 PermaSleeve® DR Diesel Resistant
Polyolen Wire Marking Sleeves

Brady’s B-7646 diesel resistant wire marking sleeves are a yellow, 3:1 ratio
heat shrinkable wire marking sleeves. These thermal transfer printable
sleeves feature a double-sided format.

B-7646 PermaSleeves have been developed for wire and cable
identification in applications that have exposures to organic fluids,
common fuels, lubricants and solvents for extended periods of time and at
high temperatures.

These heat shrinkable wire marking sleeves have an operating
temperature of -55°C to 135°C (-48°C to 57°C) and meet the following
industry specifications:

• SAE-AS-81531

• MIL-STD-202 method 215k

• NF F 00-608 Type A and H

Permasleeve Catalog Numbers:

PermaSleeve

Follow the steps below to assemble the B-7646 PermaSleeve® DR Wire Marking Sleeve catalog number
that meets your needs or view all available catalog number on the following pages.

Example catalog number:

DR - 125 - 2 - YL - 2

Product Diameter Width Color Pieces

Wire Markers

Available options for B-7642 PermaSleeve® DR Wire Marking Sleeve:

DR = Double Sided Printing, B-7642

1

⁄8" size fits wire diameter 0.062" - 0.110" and approx. wire gauge 20 to 16

125 =

3

⁄16" size fits wire diameter 0.094" - 0.151" and approx. wire gauge 16 to 10

187 =

1

⁄4" size fits wire diameter 0.125" - 0.215" and approx. wire gauge 12 to 8

250 =

3

⁄8" size fits wire diameter 0.188" - 0.320" and approx. wire gauge 8 to 4

375 =

1

⁄2" size fits wire diameter 0.250" - 0.450" and approx. wire gauge 6 to 1

500 =

2 = 2”

Optional*

Step 1: Choose Product Type

Step 2: Choose Diameter

Step 3: Choose Sleeve Width

Create your own:

- - - -

Product Diameter Width Color Pieces

Step 4: Choose Your Color

Standard Colors for DR: YL = Yellow

Step 5: Choose Roll Size

Note: Small size is standard

If sleeve diameter is 125–250:
Standard = 2,500

If sleeve diameter is 375:
Standard = 1,000

Step 6 (optional): Choose Pieces Per Sleeve

While 1 marker per sleeve is standard, if desired, the sleeve can be split into multiple pieces.
Insert number of pieces into “Pieces” blank.
Example: DR-187-2-WT-S-4 This “4” means this 2.000” sleeve is slit into four 0.500” pieces

Available options: 2, 3, or 4 pieces.

Recommended Ribbon Series: R6600 Series

Recommended Printer Series: Bradyprinter

™

Printer, BBP®72 Double Sided Printer

Brady IP

Software Compatibility: LabelMark™ Labeling Software

If sleeve diameter is 500:
Standard = 500

™

PR Plus Printer,

200

IP Series, PR Plus & BBP72 Print Ribbons on page 134.

Full Material Properties on page 227.

PermaSleeve® Wire Marking Sleeves

B-7646 PermaSleeve® DR Diesel Resistant Polyolen Wire Marking Sleeves:

Use the table below to browse all available single-sided printing, 2” width B-7646 PermaSleeve® DR Diesel Resistant Polyolefin
Wire Marking Sleeves or build your own catalog number on page 200.

Double-Sided Printable, 2” Sleeve Width

Catalog # Color

DR-125-2-YL Yellow 2500 22 to 16 0.046 (1.2) - 0.110 (2.8) 0.125 (3.2) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 2.000 (50.8) PR+, IP, BBP72 R6600
DR-125-2-YL-2 Yellow 5000 22 to 16 0.046 (1.2) - 0.110 (2.8) 0.125 (3.2) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 1.000 (25.4) PR+, IP, BBP72 R6600
DR-125-2-YL-3 Yellow 7500 22 to 16 0.046 (1.2) - 0.110 (2.8) 0.125 (3.2) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 0.500(12.7) PR+, IP, BBP72 R6600
DR-125-2-YL-4 Yellow 10000 22 to 16 0.046 (1.2) - 0.110 (2.8) 0.125 (3.2) 0.024 (0.6) .024 (0.6) ± .003 (0.07) 0.250 (6.4) PR+, IP, BBP72 R6600

DR-187-2-YL Yellow 2500 20 to 10 0.062 (1.6) - 0.150 (3.8) 0.187 (4.7) 0.062 (1.6) .020 (0.5) ± .003 (0.07) 2.000 (50.8) PR+, IP, BBP72 R6600
DR-187-2-YL-2 Yellow 5000 20 to 10 0.062 (1.6) - 0.150 (3.8) 0.187 (4.7) 0.062 (1.6) .020 (0.5) ± .003 (0.07) 1.000 (25.4) PR+, IP, BBP72 R6600
DR-187-2-YL-3 Yellow 7500 20 to 10 0.062 (1.6) - 0.150 (3.8) 0.187 (4.7) 0.062 (1.6) .020 (0.5) ± .003 (0.07) 0.500(12.7) PR+, IP, BBP72 R6600
DR-187-2-YL-4 Yellow 10000 20 to 10 0.062 (1.6) - 0.150 (3.8) 0.187 (4.7) 0.062 (1.6) .020 (0.5) ± .003 (0.07) 0.250 (6.4) PR+, IP, BBP72 R6600

DR-250-2-YL Yellow 2500 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR+, IP, BBP72 R6600
DR-250-2-YL-2 Yellow
DR-250-2-YL-3 Yellow 7500 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) 0.500(12.7) PR+, IP, BBP72 R6600
DR-250-2-YL-4 Yellow 10000 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) 0.250 (6.4) PR+, IP, BBP72 R6600

DR-375-2-YL Yellow 1000 12 to 4 0.125 (3.2) - 0.320 (8.13) 0.375 (9.5) 0.125 (3.1) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR+, IP, BBP72 R6600
DR-375-2-YL-2 Yellow 2000 12 to 4 0.125 (3.2) - 0.320 (8.13) 0.375 (9.5) 0.125 (3.1) .025 (0.6) ± .003 (0.07) 1.000 (25.4) PR+, IP, BBP72 R6600
DR-375-2-YL-3 Yellow 3000 12 to 4 0.125 (3.2) - 0.320 (8.13) 0.375 (9.5) 0.125 (3.1) .025 (0.6) ± .003 (0.07) 0.500(12.7) PR+, IP, BBP72 R6600
DR-375-2-YL-4 Yellow 4000 12 to 4 0.125 (3.2) - 0.320 (8.13) 0.375 (9.5) 0.125 (3.1) .025 (0.6) ± .003 (0.07) 0.250 (6.4) PR+, IP, BBP72 R6600

Sleeves
Per Roll

5000 16 to 8 0.094 (2.4) - 0.215 (5.5) 0.250 (6.4) 0.093 (2.4) .025 (0.6) ± .003 (0.07) 1.000 (25.4) PR+, IP, BBP72 R6600

Approx.
Wire
Gauge

Range of Wire Diameter

Inch (mm)

Min. Max.

Supplied
Diameter
Inch (mm)

Recovered
Diameter
Inch (mm)

Recovered Wall

Thickness
Inch (mm)

Sleeve Width
Inch (mm) Rec.Printer

Rec.
Ribbon

THT Label Materials

DR-500-2-YL Yellow 500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 2.000 (50.8) PR+, IP, BBP72 R6600
DR-500-2-YL-2 Yellow 1000 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 1.000 (25.4) PR+, IP, BBP72 R6600
DR-500-2-YL-3 Yellow 1500 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 0.500(12.7) PR+, IP, BBP72 R6600
DR-500-2-YL-4 Yellow 2000 8 to 1 0.187 (4.8) - 0.450 (11.4) 0.500 (12.7) 0.187 (4.7) .025 (0.6) ± .003 (0.07) 0.250 (6.4) PR+, IP, BBP72 R6600

YL = Yellow

While 1 or 2 markers per sleeve is standard, you may also choose to have each sleeve slit
multiple times to produce multiple pieces. Simply replace the double asterisks (**) in the
catalog number to fill in your desired pieces per marker.

Example: DR-187-2-YL-** becomes HDR-187-2-YL-4
This “4” means that this 2.000” sleeve is slit into four 0.500” pieces.

Standard Option:

1 marker per sleeve

** Choosing Your PermaSleeve Pieces (optional):

Other Available Slit Options:

3 or 4 markers per sleeve

Did You Know? Custom Label Offerings

Don’t see a stock material in the size, configuration or color
needed for your particular application?

Brady offers custom label capability for many of the materials in
this catalog. Our dedicated, experienced custom quoting team
can provide pricing for your unique label needs.

Contact Brady Customer Service at for more
information and to order your custom labels.

PermaSleeve Wire Markers

IP Series, PR Plus & BBP72 Print Ribbons on page 134
Full Material Properties on page 227.

201