Bradley Corporation S59-2005 User Manual
• Durable Construction from Brass and Stainless Steel
• Reliable Wax-Filled Thermostat
• Responds to Changes of Incoming Pressure or Temperature
• ASSE 1016, Type T Certified
• Checkstops on Inlets
• Adjustable Set Point within Temperature Range
• Easy Installation and Serviceability
• Dirt and Lime Resistant
• Factory Assembled and Tested
• Standard NPT Plumbing
Specification
Thermostatic water mixing valve shall consist of a piston control mechanism with positive
shut-off of hot water when cold water supply is lost. Construction shall be bronze body and
cap with replaceable corrosion resistant components, including stainless steel piston and
liner. Valve shall be certified to ASSE 1016, Type T. Thermostatic valve shall be Bradley
Model S59-2005.
Valve Specifications
Maximum Operating Pressure
125 PSI (860 kPA)
Maximum Inlet Temperature
180° F (82° C)
Temperature Range* Set Point
Cold to 110° F (43° C) 110° F (43° C)
Std.
Flow Capacities – GPM (L/Min)
Pressure Drop – PSI (Bar)
10
15
(1.5)
2.25
(10.0)
20
(2.0)
2.5
(11.5)
(1.0)
2.0
(8.0)
30
(2.5)
3.0
(13.0)
45
(3.0)
4.0
(14.5)
60
(4.0)
4.5
(16.5)
Model
S59-2005
Min
Flow
0.5
(2.0)
5
(.5)
1.5
(6.0)
Shower Valve
Thermostatic Mixing Valves
Built-in Valve with Lever Handle
(Shown with Check-Stops)
(mm)Dimensions
4-1/2" (114) Diameter Wall Opening Required
HOT COLD
* Temperature range is based on a hot water inlet of at least 130° F (54° C).
Exact temperature range may vary slightly.
Engineer's Approval
Page 1 of 1 5/18/2016
This information is subject to change without notice.
Bradley_TMV_PointOfUse_S59-2005
6-1/2" (165)
With Stops
2-1/2" (64)
Without Stops
1/2" (13) NPT
1-1/2" (38)
1/2" (13) NPT
Pipe Plug
3-1/8" (79) Min.
3-7/8" (98) Max.
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
© 2016 Bradley
bradleycorp.com
Loading...