Bowflex Revolution XP Lat Tower Owner's Manual
Lat Attachment
P/N: 001-7101 Rev A (4/19/07)
The Bowflex Revolution® XP
Lat Attachment
Assembly Instructions
2
Table of Contents
Before You Start ....................................... 2
Tools You Will Need / Hardware Contents .... 3
Box Contents and Shipping Weights ............ 4
Assembly ................................................. 5
Important Contact Numbers ....................... 8
Before You Start
Basic Assembly Principles
Here are a few basic tips that will make your assembly of the Bowflex Revolution™ XP quick and easy.
By using these principles, you can simplify each process and save yourself extra time and effort.
1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly
read the assembly instructions for that step prior to starting assembly for the step.
2. When tightening a locknut on a bolt, use a combination wrench to grip the locknut and ensure that
it is fastened securely.
3. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through
the holes.
4. As a general rule, and for all bolts and nuts on your Bowflex Revolution
toward the right to tighten and left to loosen. Or you can remember the mnemonic: “Righty tighty,
lefty loosey.”
™
XP, turn bolts or nuts
Tools You Will Need
2
3
1
4
These Tools Are Not Provided in the Box
Phillips Head Screwdriver
7/32” Allen Wrench for 3/8” Allen Screws
9/16” Wrench or Adjustable Wrench
* Tool and Hardware specifications subject to change
without notice.
Hardware
3
3
3
ITEM QTY. DESCRIPTION
1 2 NYLOCK NUT 3/8”
2 2 BUTTON HEAD CAP SCREW 3/8”x 4”
3 4 NARROW WASHER 3/8”
4 2 CABLE CLIP
Loading...