Page 1
Subwoofer Amplier
SA1000
Listening is believing
This new 2U rack mount Class D subwoofer amplier is based upon ICEpower® technology and is purposely designed
to drive the CT subwoofers. This Class D amplier is incredibly powerful and stable and will allow the CT subwoofers
to produce fantastic amounts of tight slamming bass. The SA1000 allows for up to two of the same subwoofers to be
driven simultaneously.
Technical Specications
Description
Amplier functions
Amplier inputs
Amplier outputs
Amplier power output
Input impedance
Signal / noise
1000W rack-mount amplier with built-in subwoofer
equalisation
Front panel:
Rotary volume (line in)
Rotary low-pass lter frequency (4th-order Linkwitz,
40Hz - 140Hz)
Low-pass lter defeat 2-posn switch
Phase 0º/180º 2-position switch
Bass extension 3-position switch
Movie/music EQ 2-position switch
On/auto/standby 3-position switch
Status LED
Fault LED
Rear panel:
Model select 3-position switch (CT SW10/CT SW 12/
CT SW15)
2x RCA Phono socket, line in
2x RCA Phono socket, link out
1x XLR socket, line in
1x XLR socket, link out
3.5mm jack - 12V trigger on/standby (overrides
manual standby setting)
3.5mm jack - 12V trigger equalisation movie/music
1x Neutrik® Speakon® 4-pole speaker socket
2x pairs of Binding Posts
1000W
33kΩ
80dB
www.bowers-wilkins.com
Amplier rated power
consumption
Dimensions
Net weight
Finish
Kevlar is a registered trademark of DuPont.
ICEpower is a registered trademark of B&O ICEpower A/S.
Speakon is a registered trademark of Neutrik AG
Copyright © B&W Group Ltd. E&OE
B&W Group Ltd reserves the right to amend details of the
specification without notice in line with technical developments
300W – 1/8 full power
34W – Idling
Height: 100mm (3.9 in) [88.5mm (3.5 in) plus feet]
Width: 430mm (16.9 in)
Depth: 322mm (12.7 in)
Front panel Height: 2U 88.1mm (3.5 in)
6.45kg (14.3 lb)
Black
Loading...