Boss Audio BV9980 User Manual

44

EE

10R-02121810R-021218

00

Contents

1

Before You Start

Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 9 Specifications 11

2

Installation

Wiring Connections 12 Install the Unit 13 Detach the Unit 14 Install the Front Panel 15 Detach the Front Panel 15

3

Common Operations

Reset the Unit 16 Turning the Unit On/Off 16 Volume Control 16 Setting the Sound Characteristics 16 EQ Setting 16 Turning Loudness On 16 Eject a Disc 17 Open the Monitor 17 Angle Setting 17 Mute Function 17 Clear 17 Mode Selector 17 Menu Setup Button 17 Infrared Sensor 17 Eject a Disc Compulsively 17

5

4

Main Menu

Main Menu Setup 18 Audio Adjust 18

2

Video Adjust 19 Source Setup 19 Others 19

5

DVD

Playing a DVD 23 DVD Setup 23 Selecting Tracks Fast 23 Stop the Playback 23 Pause the Playback 23

Skip Backward/Forward/F.F/F.REW the Playback

Number Buttons 23 Repeat Playing 23 System Switch 24 Slow Motion Playback 24 Increase Picture Size 24 On Screen Display 24 Setting the Playback Time 24 Changing the Viewing Angle 24 Changing Audio Language 25 Changing the Subtitle Language 25 Selecting Menu 25 DVD Setup Menu 25

6

MP3/USB/SD

Playing a MP3/USB/SD Disc 32 Selecting Tracks Fast 32 Repeat Playing 32 Number Buttons 32 Stop Playing 32 Selecting Tracks 32 Pause the Playback 32 Skip Backward/Forward/F.F/F.REW the Playback 33

On Screen Display 33

Exit an USB 33 Exit a SD Card 33

23

11

Additional Information

Simple Troubleshooting Guide

The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist .below

Contents

00

Problem

No power.

Some errors occur in LCD or no function pressing the button.

Unable to receive stations.

Poor effect on receiving a station.

CDs cannot be loaded.

Sound skips.

No images.

Images skip.

Note:

If any of the problem persist after check list had been made, consult your nearest service dealer. Never

attempt to disassemble your unit by yourself.

the

when

Cause/Solution

.

Check and make sure whether the fuse is blown, replace with the proper value if necessary.

.

Press RESET button.

.

Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly.

.

Antenna may not be the proper length. Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

.

The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location.

.

A CD is loaded in the mechanism.

.

The CD is dirty or damaged.

.

The Video line from main unit to the TV is not connected properly.

.

Improper setting of the color system. Set the color system according to the

to PAL or NTSC

connected television.

Due to continuous product improvement, the operations are subject to run the model.

7

VCD/CD

Playing a VCD/CD Disc 34 Selecting Tracks Fast 34 Repeat Playing 34 Playing Tracks at Random 34 Number Buttons 34 Stop Playing 34 Pause the Playback 34

Skip Backward/Forward/F.F/F.REW the Playback 34

System Switch 35 Slow Motion Playback 35 Increase Picture Size 35 On Screen Display 35 Setting the Playback Time 35 Selecting Channel 36 Selecting Title 36 Program Playing 36

8

MP4(AVI,MPEG4)

Basic Operation of MP4 37 Number Buttons 37 Stop the Playback 37 Pause the Playback 37 On Screen Display 37 Repeat Playing 37 Setting the Playback Time 37

Slow Motion Playback 37

Selecting Tracks Fast 38

Skip Backward/Forward/F.F/F.REW the Playback 38 Playing Tracks at Random 38 Increase Picture Size 38 Changing Audio Language 38 Changing the Subtitle Language 38

9

Tuner

Listening to the Radio 39 Band Selector 39 Manual/Automatic Tuning 39 DX/LOC Selector 39 Selecting the Stored Station 39 MO/ST Selector 40 Scanning/Memorizing Stations Automatically 40 Number Buttons 40 On Screen Display 40

10

AUX

AUX Touch Screen Menu 41

11

Additional Information

Simple Troubleshooting Guide 42

42

3

Before You Start

AUX

10

IMPORTANT SAFEGUARDS

Be sure to connect the color coded leads

1

according to the diagram. Incorrect con-

2

3

4

5

6

7

8

9

10

11

12

nections may cause the unit to malfunction or damage the vehicle s electrical system.

Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.

Make sure all the connections are completely correct before turning on your unit.

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.

Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.

To

lest the driver distrack his attention from, please i place.

Using the unit after starting the engine, otherwise cause used up.

The unit must be screened from direct sunlight, or the will be wasting for the high temperature.

Do not use the unit in extreme high temperature or such low temperature conditions, and also avoid humidity and direct sunlight.

Take care of the magnetism of the unit. Do no put the credit card, cassette or watch around the unit, or they would be broken or some information in them lose.

To lest disturb the video frequency, keep far away from the unit when using your phone.

Do not put the remote under high temperature or where the sun strikes it, or else the control remote can not work normally.

nstall the unit in an apt

the unit can not be started, be-

the electric energy of battery was

electric energy of battery

,

control

About this manual

This unit features a number of sophisticated functions ensuring superior operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This manual will help you understand the functions and operations of the unit. This manual main explains remote control operation. However, in addition to those functions related with DVD/VCD/CD/MP3/MP4 operation that can only be operated by the remote control, there are also functions can be operated by the buttons provided for the main unit.

AUX Touch Screen Menu

Press SRC to switch to the AUX mode:

AV SET

SRC

AV SET

For more details please refer to pages 18 to 19. To adjust VIDEO ADJUST, a DVD should be inserted and played normally at first.

VOL+

To increase the volume

VOL-

To decrease the volume

41

09

Before You StartTuner

01

MO/ST Selector

6

Press ST button on the remote control

MONO mode or STEREO

select mode.

Stereo reception is charged when STEREO appears. It is switched to mono mode when MONO appears. ST OFF appears on the display to switch to MONO compulsively.

Note:

It is only valid on remote control.

*

Switch to MONO compulsively to improve

*

the listening quality when week signal.

It is only valid in FM tuning.

*

to

Scanning/Memorizing Stations Automatically

During radio status, you can press AMS button on the remote control to scan each

station

stored 5 seconds respectively which stored in 6) You can press responding Number Buttons or ton when your desired station is And it starts playing that station.

When press and hold AMS for more than 2 seconds, automatically memory storing The radio automatically selects and

has it stored in any one of Number

Buttons (from1 to 6).

Note:

* The unit can be stored up to 6 stations each band. * Press in the monitor performs the same function.

for

23

Number Buttons (from 1 to .

the cor

AMS but

charged.

4

it will activate

function.

the

4

button

a station

23

Number Buttons

During radio status, press Number Buttons to receive the stored stations.

During radio status, Number Buttons (from 1 to 6) can help you your

favorite station. You can follow the as below:

1

When receiving a station,press and hold any one of the Number Buttons (from 1 to 6) until the number app-

ears on the LCD, which indicates that station is already stored in the corresponding number button.

2

Press AMS button to receive stations automatically, and store them in 1 to 6 number respectively.

3

Press and hold another number button more than 2 seconds when listening in a station in one number button s, the button number button.

Note:

Press in the monitor performs the

*

same function.

23

4

station will be stored in that

5

store

steps

On Screen Display

During radio mode, press OSD to

8

display the edition information and the LCD display the current time.

Note:

It is only valid on remote control.

*

PRECAUTIONS

This unit can play the following discs only:

Type of disc

DVD

VCD

CD

MP3

MPEG-4

NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.

Do not attempt to modify the unit, modifying the unit may cause an accident.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit .

To enjoy optimum sound and images while playing, handle the discs as follows:

Handle the disc by its edge to keep

the disc clean, and do not touch the surface.

Label on the disc Recorded material

Sound and moving pictures

Sound only

Sound and moving pictures

Do not use your CDs with paste residue

or ink attached.

Do not use CDs with labels or stickers attached, which may leave a sticky residue while beginning to peel off. (Shown as the picture)

Clean the discs with an optional cleaning cloth. Wipe each disc from the center out. (Shown as the picture)

Size of disc

40

Besides playing the discs above, the unit also can be connected to other connector. Please refer to the details on page 19 before you playing them.

5

01

TunerBefore You Start

09

Maintenance

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer.

!

Warning

Never use the fuse with the rated

amperage more than that supplied to

your unit, otherwise it will damage the

unit.

Replacing the Battery

When the range of the operation of the card remote control becomes short or no functions while operating. Replace the lithium battery with a new button cell (CR2025). Make sure the battery polarity before replace.

Gently pull out the Battery Holder while pressing the Stopper.

Put the button-type battery with mark(+) upward into the Battery Holder.

6

Insert the Battery Holder into the Remote Control.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Make sure the proper polarity when loading with the battery.

To prevent short circuit, do not use metal tweezer to clip the battery.

!

Warning!

Improper handle with the battery may

lead to explosion.

It cannot be charged , disassembled or

thrown into a fire.

Listening to the radio

2 3

1

5

FM1 CH:1 87.50MHz

87.50M

90.00M

98.00M

6 78 9

1

Band Indicator

Shows which band the radio is tuned to.

2

Preset Number Indicator

Shows what preset has been selected.

Frequency Indicator

3

Shows which frequency the tuner is tuned.

4

SEEK+/SEEK-

Briefly press to tune by the presettable range, hold and press to tune automatically.

5

The 6 stations of the current band.

Briefly press to select station, hold and press to save the current station to one of the 6 stations.

6

BAND

To select the bands.

7

AMS

Briefly press to scan the current station, hold and press to tune automatically.

8

MENU

Press this button to set the main menu.

9

SRC

Press this button to select the signal source.

87.50M

108.00M

106.00M

Band Selector

During radio status, repeatedly press

3

BAND button to select bands in

lowing order:

fol

4

FM1

AM2 AM1

Note:

* Press BAND on the head unit or in the monitor performs the same function.

the

FM2

FM3

6

Manual/Automatic Tuning

Manual Tuning: ress ( button on the remote control continuously to select a or respectively.

station downward upward

Automatic Tuning: ress and for more than 3

) button seconds, the ra-

automatically searches down-

dio a station ward upward

or respectively and plays when

it finds a station.

Note:

Press / on the head unit or in the

*

monitor performs the same function.

Por )

P hold ( or

DX/LOC Selector

During radio status, press LOC button to select or weak station reception.strong

LOC ON appears on the display and

only local station is available. LOC OFF appears on the display both distance and local stations can be received.

Note:

The function is only valid on remote

*

control. The function is invalid in AM tuning.

*

5

Selecting the Stored Station

During radio status, press button to select the stored station upward, press to select downward.the stored station

Note:

The function is only valid on remote

*

control.

27

39

08

MP4(AVI,MPEG4)

Before You Start

01

Selecting Tracks Fast

During MP4(AVI,MPEG4) playback, first

21

press to return to the beginning of the current track, press again within 3 seconds to play previous track, press

21

to play next track.

Note:

* Pressing and button on the head unit or and in the monitor performs

the same function.

also

Skip backward/forward/F.F /F.REW the playback

20

Press ( or ) on remote control to perform fast reward or fast forward. Each

press will change as the following

2X 4X 8 X 16X

Note:

* Press and in the monitor performs the same function.

Playing Tracks at Random

During MP4(AVI,MPEG4) playback,

16

RDM button on the remote control to

any track at

play random under the directory which you select. P

ress it again to cancel

this function.

Note:

* The function is only valid on remote control.

press

Increase the size of the picture

During MP4(AVI,MPEG4) mode, Press ZOOM to increase the picture in size. There

9

are different sizes and they are as follows. Each pressing will increase the size til it reaches the maximum.

2X 3X 4X

No Change

38

Note:

The function is only valid on remote

*

control. To remove the image by pressing button.

*

27

Changing audio language (Multi-audio)

With MP4(AVI,MPEG4) disc featuring multi-audio recordings, you can press

6

AUDIO to switch between language and audio systems during playback.

Selection options switch as follows:

AUDIO 1 AUDIO 2 AUDIO 3

Note:

* This function is operated by using remote control.

* This function only operates with disc

the

featuring multi-audio recordings. * The number in the mark on a

2

disc package indicates the number of recorded languages/audio systems.

Changing the subtitle language (Multi-subtitle)

With MP4(AVI,MPEG4) disc featuring multi-subtitle recordings. You can press SUB-T to switch between subtitle languages during playback.

Selection options switch as follows:

Subtitles 1

Subtitles 2

Subtitles OFF

Note:

* This function is operated by using remote control.

* This function only operates with disc featuring multi-subtitle recordings. * The number in the mark on a disc

2

package indicates the number of recorded subtitle languages.

5

the

Location of the Controls

The Expanding

13

The Whole

16

7

8

3

20

1

4

5

18

2

19

10

12

6

11

17

15

14

7