Boss BV10.1B User Manual

To ensure safety while driving

and to comply with laws,

drivers should not watch video or

operate the video device while driving.

-1-

Content

Content..............................................................................................

Installation steps...............................................................................

Remote control..................................................................................

Controls on main unit.........................................................................

Remote Control Description...............................................................

Universal functions..........................................................................

Radio operation................................................................................

Bluetooth Operation.........................................................................

Disc/USB/card operation...................................................................

1. Loading or unloading a disc, USB or card.....................................

1.1 Loading a disc, USB or card.......................................................

1.2 Unloading a disc, USB or card....................................................

2. Function Icons.............................................................................

2.1 Function Icons-board of Digital Video/CD(Video)/MPEG4/Image

/MP3/WMA.................................................................................

2.2 CD interface..............................................................................

3. Function of controls on the touch screen/main unit/remote

control........................................................................................

AUX IN operation..............................................................................

iPod operation..................................................................................

Rear View Camera.............................................................................

Troubleshooting...............................................................................

Specification....................................................................................

1

2

7

8

9

10

13

15

18

18
18
19
19

19
20

21

30

31

32

33

34

-2-

1. Remove the chassis from Slide Bracket Housing;

1) Press the REL button to release the control panel ;

2) Hold the right side of the control panel to pull it rightwards a little and then to

you for removing it ;

3) Remove the PLASTIC FRAME from the chassis (see the Installation diagram);

4) Insert the 2 KEY PLATES into the grooves at the both sides of the chassis till
they click(see the Installation diagram);

5) Pulling the two KEY PLATES to remove the chassis from the Slide Bracket
Housing ;

2. Mount the Sliding Bracket Housing in the position of car multimedia system and
bend some tabs of Sliding Bracket Housing to fix it.

3. Connecting all wires:

1) Connecting all wires according ot the wiring diagram on next page;

INSTALLATION STEPS

REL button

1

2

-3-

WIRING DIAGRAM

NOTE:

1. Must use 4 ohm speakers.

2. After con necting park ing brake inpu t line, video on scre en of control pa nel

will be d isplayed only after

3. Before finishing wiri ng, do not attach control panel ont o chassis.

apply ing parking br ake.

SUBWOOFER GREY

VIDEO INPUT YELLOW

RCH RED

LCH WHITE

REAR AU DIO OUTPU T

LCH WHITE

RCH RED

VIDEO OUTPUT YELLOW

FRONT A/V OUTPUT

REAR CAMERA IN PUT YELLOW

BROWN

PINK

(B+)12V
REAR CAMERA SWITCH

(B-)PARKI NG BRAKE

GREY

GREY /B LACK

VIOL ET

VIOL ET /BLACK

WHIT E

WHITE/ BL AC K

GREE N

GREE N/ BLACK

AUTO ANTENNA

BLUE

GROUND( B-)

MEMORY BACK-U P(B+)

IGNITION SWITC H(B+)

RED

YELL OW

BLAC K

CHOK E
BOX

RADIO ANTENNA

Not used

Fron t Left

Rear L eft

Fron t Right

Rear R ight

Opening

Clip

1

2

-4-

2) Attaching the control panel onto the chassis;

(1) Insert the left side of the control panel into the opening of the chassis .
(NOTE : the “clip” point on the control panel must be attached into the opening
of the chassis .)

(2) Gently push the right side of the control panel till you feel a “ Click” .

3) Testing it for making sure that it can work properly .

4. Installing chassis according to the installation diagram on next page:

1) Insert the chassis of the car multimedia system into the Sliding Bracket Housing.

2) Use the metal strap to fix the rear part of chassis.

5. Installing the monitor refer to next next page.

* Removing the chassis:

1) removing the monitor refer to next next page

2) Remove the metal strap from the chassis ;

3) Remove the control panel from the chassis;

4) Remove the plastic frame from the chassis;

5) Insert 2 key plates into the left and right sides of the chassis and draw the chassis
out of the sliding bracket housing.

Installation Diagram

-5-

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove
the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into
left and right side of chassis as above illustration.

DASH B OARD

METAL MOUNT ING
STRA P

HEX NU T

SPRI NG WASHE R

PLAI N WASHER

TAPPING S CREW

CONS OLE

SLID E BRACK ET
HOUS ING

HEX BO LT

SCRE WDRIV ER

TABS

KEY PLATE

KEY PLATE

PLAS TIC FRA ME

Installing the monitor.

1) Press the OPEN/MONITOR-ANGLE button to slide the monitor holder out and
stand it up.

2) Insert the 2 bulges of the monitor into the 2 hollows of the monitor holder and
flip up the monitor, then push the top middle part of the monitor to make the
monitor attach onto the monitor holder.

Removing the monitor.

1) Push the MONITOR REL to detach the monitor from the monitor holder;

2) Hold the top part of the monitor to pull away from the monitor holder and lift it
up to remove it.

-6-

Opening

Clip

Opening

Clip

MONITOR REL

1. Removing insulating sheet

If

)

)

)

.

)

)

)

.

)

)

using remote control for the first time, you
can see an insulating sheet at the bottom
side of remote control as right.

you must remove the insulating sheet as right.
Otherwise, the remote control is disabled.

2. Replace battery

If the electric energy of battery is weak,
replace it.

1 Press and hold the movable block as direction
indicated by arrow 1 as right, at one time pull
batteryl holder out of remote control as
direction indicated by arrow 2 as right.

2 Replace the old battery by a new one with (+)
polarity side upward as right.

3 Insert the battery holder into remote control
again as right.

3 Note about using remote control

1 You should face the emitting window of remote control towards the sensor
window of the unit.

2 Operation angle for front panel: About 30 degree

3 The distance between the emitting window of remote control and the sensor
window of the unit : < 5M .

4 Battery Warning

leakage may cause damage to remote control.1 Battery

2 Do not throw batteries into fire.
.

3.To avoid risk of accident, keep batteries out of reach of children.

REMOTE CONTROL

-7-

-8-

Controls on Main Unit

1. AUX IN JACK

2. USB PORT and C OVER

3. SEL BUT TON and V OL KNOB

4. REL BUT TON

5. IR SENSOR WIN DOW

6. RESET BUTTON

7. EJECT BUTTON

8. POWER/SOU RCE B UTTON

9. BAND/ BUTTON

10. MUTE BUTTON

11. >>| B UTTON

12. |<< BUTTON

13. >|| BUTTON

14. SD/MMC CAR D SLO T

15. LCD SREEN

16. OPEN BUTTON

17. MICROPHO NE

18. BUTTON

Control P anel

Sliding Pl ate di agram afte r remo ving Co ntro l Panel

6

14

2 3

4

7

9

1

11

10

8

5

13

16

15

17

12

18

MIC

-9-

1

2

6

10

11

3

20

21

33

9

12

17

34

23

4

5

7

8

13

14

15

16

18

19

22

24

25

26

27

28

29

30

31

32

Remote Control Description

16. VOL - BUTTON

17. SEL BUTTON

18. SET UP BUTTON

19. GOTO or * BUTTON

20. >|| BUTTON

21. STOP BUTTON

22. AUD IO or MO/ST BUTTON

23. ZOOM or ANGLE BUTTON

24. EQ or L OUD BUTTON

25. CLK B UTTON

26. ^ BUTTON

27. >>| BUTTON

29. > BUTTON

30. V BUTTON

31. |<< BUTTON

32. INT or 3 BUTTON

33. 6 BUTTON

34. +10 o r # BUTTON

35. 9 BUTTON

36. 0 BUTTON

37. RPT or 2 BUTTO N

38. 5 BUTTON

39. 7 and 8 BUTTON

28. ENTER BUTTON

1. POWER/SOURCE BUTTO N

2. MUTE BUTTON

3. or REDIAL BUTTON

4. BUTTON

5. Or PAI R BUTTON

6. MENU o r SW BUTTON

7. >> BUTTON

8. SUBTITL E or LO/DX BUTTON

9. < BUTTON

BAND or O SD

<< BUTTON

12. A/PS or TITLE/PBC BUT TON

13. TOP or 1 BUTTON

14. VOL + BUTTON

15. RDM o r 4 BUTTON

10. BUTTON

11.

35

36

37

38

39

-10-

Universal Functions

1. POWER butto n and i con
In power off mode, pres sin g POWER button on remote co ntr ol or pressi ng PO WER button on
control pane l pow ers on main unit.

In power on mode , lon g pressing POWER button o n con trol panel or on remot e con trol or touch
icon on source m enu p owers off ma in unit.

2. VOL kno b & VOL +/VOL- button s
To adj ust volume level, ro tat e VOL knob on cont rol p anel or press or hold VO L+ or V OL- button
on remote cont rol .

3. SEL but ton
To switch betwe en BA SS,TREBLE,B ALA NCE, FADE,COLOR,B RIG HTNESS,CONTRAS T, TINT
and VOLUME, br ief ly and repeatedly press S EL button.

After switchi ng on t he desired mode above, ro tate VOL knob or p res s VOL+/VOL- button s to se t it.

To switch betwe en BL UETOO TH, LOUD, SWF, EQ, DX /LO CAL(in radio mode), STE REO/MONO(in
radio mode), T IME 1 2H/24H, CLOCK, BUZ Z,EUR/USA FREQ,AN IMATIO N, BG and LED COLOR,
long press SEL button to switch on BL UETOOTH, t hen briefly and repeate dly press SEL bu tto n.

After switchi ng on t he desired mode above, ro tate VOL kn ob or p ress VOL+/VOL- but ton s to set it.

4. MUTE button
To switch MUTE mo de on o r off, pr ess MUTE button o n rem ote control or press MUTE b utton on
control pane l.

5. To swit ch between EQ modes
To select a desir ed pr eset EQ mode from JAZZ , CLA SSIC, POP, ROCK and USER, press E Q/LOUD
button on remo te co ntrol continuously.

6. To switch LOUD mode
To switch LOUD mo de be tween ON and OFF, l ong p res s EQ/LOUD butto n on re mote control.

7. SW button
To switch SWF bet wee n ON and OFF, long pr ess S W button on remote con tro l.

8. CLK button
Press CLK butt on on r emote control to dis pla y clock time .

9. OPEN or butto ns an d icon

To slide the moni tor h older out and stand it u p or in to the monitor holde r slo t(after removing t he
monitor), pr ess O PEN button on contro l pan el or press button on re mot e control;

To adjust the angle of th e mon itor, long press OPEN b utton on control pan el or b utton on
remote contr ol or t ouch icon on source me nu .

10. SOURCE button a nd so urce menu
To switch work so urc e between RADIO, DIS C(a fter inserting a dis c), U SB(after inserti ng a US B
storage), CA RD( after inserti ng a ca rd) , AUX IN, and BT MUSIC , pre ss SOURCE button on re mot e
control or pre ss SO URCE button on contr ol pa nel continuously.

During disc( non -CD)/USB/card pl ayb ack, touch screen to pop up F unc tion Icons-board a nd th en
touch the icon i n the F unction Icons-bo ard t o enter the display st atu s of the source menu
before enter ing D isc/USB/Card mod e(r efer to Disc/USB/Card O per ation) .

During AUX playbac k, touch screen to pop u p AUX i nterface and then to uch icon to enter the
display stat us of t he source menu befor e ent ering AUX mode(refe r to AUX o peration).

In radio,bluetooth music o r CD mo de, touch icon to e nte r the display status o f the s ource menu
before enter ing r adio,BL UETOO TH mu sic or CD mode(re fer t o Radio Operation, Blue tooth
Operation an d Dis c/U SB/Card Operatio n).

-11-

The source menu displays as follows:

In source menu, touch one icon of DISC, RADIO, BLUETOOTH music, AU X, US B and S D Car d
to enter one work source of DISC, RADIO, BLUETOOTH music, AUX IN, USB and SD Card.

11. ico n

1) Settings System
In source menu, touch icon to display SYSTEM page of SETUP menu as follows:

In the SYSTEM page of SETUP men u, re pea ted ly to uch t he or icon to highli ght one
setting item of BRIGHTNESS, CONTRAST, COLOR, TINT, A NIM ATION, WALLPAPER , LED
and BLUETOOT H. After highl igh tin g a des ire d setting item, touch the or icon to set it.

2) SETTING SOUND
In SOUND menu, touch SOUND icon to display SOUND page of SETUP menu a s fol low s:

Source Me nu

System pa ge of SET UP menu

Sound pag e of SETU P menu

16

Contrast

Color

Tint

00

BAL ANCE

FADE

BAS S

-12-

In the SOUND page of SETUP men u, repeatedl y touch the or icon to highlight one se tting

item of TREBLE, BASS, BALANCE, FADE, SUB WOOFER, LOUDNESS, RADIO LOC/D X(entering
Sourc e Menu in radio mo de), RADIO STEREO(entering So urce Menu in rad io mode) and BUZ ZER
ON/OFF. Af ter highligh ting a desired s etting item, touch the or icon to set it.

3) SETTING TIME
In CLOCK menu, touch TIME ic on to display TI ME page of SETUP menu as follows:

In the TIME page of SETUP menu , repeatedly t ouch the or icon to hig hlight one set ting
item of HOUR, MINUTE and 24H /12H. After hi ghlighting a d esired setting item, touch the or
icon to set it.

After finishing setting, touch icon to r eturn back to no rmal playbac k.

12.RE SET button
When LC D displays wrongly or some button s are not availa ble or sound is di storted, press REL

button to detach the contr ol panel and rem ove it, then use t he sharp end of a po inted object to
press R ESET button o n the chassis fa ce to reset the pr ogram to zero.

13.RE L butto n
To d etach control panel, press REL butt on on control panel.

After de taching control panel, hold the right part of the c ontrol panel a nd pull it rightwards a little
and the n you can remove i t from chassis.

Time page of SETUP me nu

11: 36AM

MINUTE

24/12H

HOUR

-13-

Radio Operation

1. To ente r RADIO mode(SOURCE button or RA DIO i con )
When you use S OUR CE button or source menu (tapping RAD IO ic on) to enter RADIO
mode, it will dis pla y radio interface as follows:

* Some icons o n rad io interface correspond with t he bu tto ns on remote control or control
panel as follow s:

SWF icon = SW bu tto n(r emo te control)(long pressi ng)
LOUD icon = EQ b utt on( remote control)(long press ing )
MUTE icon = MUTE bu tto n

and icons = VOL- an d VOL + buttons = VOL kno b
EQ icon = EQ button
: To e nte r source menu.
icon : press i t to po p up BT P HON E interface(after pairing an d con necting a mobile
phone with blue too th fu nction)

2. To switch between bands (BAND)
The BA ND icon or button can switch betwe en ba nds of FM1, FM2, FM3, AM1 and AM2,
and the word FM1, FM2 ,FM 3,AM1 or AM2 will be displayed o n scr een.

3. To search for a station ( and icons or v and ^ or |<< and >> | but tons)

1) Long touc hin g or ic on or long pressing v or ^ button on rem ote c ontrol or long

pressing |<< or > >| bu tto n on control panel can automatic all y search down or up for
an availab le st ati on beginning from the curre nt fr equency.

2) Briefly touc hin g or ic on or briefly pressing v or ^ but ton o n rem ote control or
briefly press ing | << or >>| button on control panel can man ual ly search down or up
for a your desire d sta tion beginning from the curren t fre quency.

4. To preset and scan all memory stations (A PS ic on or A/PS button)

1) When long touc hin g APS icon or long pressing A/PS bu tto n on remote control , the radio

searches f rom t he lo west frequency and checks t he si gnal strength level until 1 cycl e
search is fi nis hed, and the 6 strongest stations are pres et to c orresponding preset number
memory ban k for t he cu rrent band.

The presettin g fun ction can be implemented in sele cte d FM or AM band. (It can presets
3x6 stations fo r FM an d 2x6 stations for AM in all)

2) When brie fly t ouc hing APS icon or briefly pressing A/ PS button, th e radio scans for each
preset statio n in FM o r AM band from NO.1 bank, each preset s tat ion b roadca sts for 5
seconds. Af ter f ini shing a circle of scanning, i t wil l resume broadcasting the station i n NO.
1 bank.

NOTE: In FM band, FM1, FM2 a nd FM3 are preset and scaned as o ne ba nd at a time;
In AM band, AM1 a nd AM2 a re preset and scaned as one ban d at a ti me.

87.5 087.5 0

90.1 090.1 0

98.1 098.1 0

106. 10106. 10

107. 00107. 00

88.5 088.5 0

87.5087.50

FM1FM1

MHZMH Z

-14-

5. To preset and listen to a memory station(1~6 icons or 1~6 buttons or CH1-6 button )

1) Long touching one of 6 number(1~6) icons or long pressing one of 6 number(1~6)

buttons can preset the current broadcasting station of the current band in the number
memory bank; .

2) Briefly touching one of 6 number(1~6) icons or briefly pressing one of 6 number(1~6)
buttons can listen to the memory station in the current band preset in the number
memory bank.

6. To switch on between stereo and mono mode (MO/ST button)

Press MO/ST button on remote control to select STEREO or MONO mode for FM band.

When the STEREO mode is activated, it can get better audio effect; when the

MONO mode is activated, it can get clearer audio signal.

7. To switch on between local and distance mode (LO/DX button)

Press LO/DX button to turn LOC on to tune for local stations with weak interference;

Press LO/DX button to turn DX on to tune for distance stations with stronger signal.

-15-

Bluetooth Operation

1. Pairing and Connecting
Prior to using the bluetooth device named Boss Audio as a handfree system for a

bluetooth-enabled mobile phone for the first time, you must
as follows:

* Prior to pairing and connecting, when displaying No Video interface of radio, CD,
AUX IN or bluetooth music, the logo BT flashes in the touch screen.

* During using the bluetooth device named Boss Audio as a handfree system for a
bluetooth- enabled mobile phone, place the bluetooth-enabled mobile phone in 3
meters from the Car A/V System;

1) Long press PAIR button on remote control or button on control panel to enter
pairing mode and flash the logo of the BT with blue frame(pressing BAND button
can exit pairing mode).

2).Switch on the bluetooth mode of your mobile phone; then s
bluetooth device and enter it; device car

Boss Audio , select it and enter it; then it will
show an interface that asks you to input a password, input 8888 and enter it; then
i with the bluetooth device Boss Audio of the car A/V system,
Confirm it, then the frame of the BT logo will be filled by blue color and they are
light all the time.

* finishing pairing and ing
or the mobile phone
plays music

2. BLUETOOTH PHONE

1) Make a call

(1) Dial with mobile phone directly;

(2)Dial with the controls on BT PHONE interface or on remote control or on control
panel

a. Long press button on remote control or on control panel or touch icon to
pop up BLUETOOTH PHONE interface as follows:

pair and connect them

elect the item to find a

When it finds the bluetooth of the A/V

system, the name will be displayed

t will pair and connect

When connect , the audio of the mobile phone transfers

to the car audio system whenever a call is made or received

.

: Same as MUTE button.

& : Same as VOL+ and VOL- or
VOL knob.

-16-

b. Use the number icons or buttons to input your desired phone number;

* When inputting a wrong digit, use icon or < button to delete it.

c. After finishing inputting, touch icon or press button on control panel or press
button on remote control to dial out.

2) Redial last dialed phone number

Touch icon or long press button on remote control to dial out the last dialed
phone number.

3) Answer a call

During an incoming call, the incoming telephone number displays in the the BT
PHONE interface. If you want to receive it, touch icon or press button on
control panel or press button on remote control; if you want to reject it, touch
icon or press button on control panel or press button on remote control.

4) Ending a call

When ending a call, touch icon or use or button.

5) Switch the audio between the unit and your device

During phone bluetooth handfree system of the car A/V system,

if you want to change the phone audio to your mobile phone, touch icon or
press button on control panel or press button on remote control.

During phone talking using the mobile phone, if you want to change the phone
audio to the the car A/V system again, use or button.(only for some mobile
phone)

6)

During phone + and - icon or

; use icon or MUTE button to mute sound

* * / # icons and buttons

they perform as * / # buttons on mobile phone.

3 BLUETOOTH MUSIC

1 Touching BT MUSIC on source menu or pressing SOURCE button can pop up BT
MUSIC interface as follows:

talking using the

Adjusting the volume during a call

talking, use VOL knob or VOL+ and VOL-

buttons to adjust volume level .

.

)

USER SW FUSER SW F

BT
MUSIC

BT
MUSIC

-17-

and icons = VOL- and VOL+ buttons = VOL knob

MUTE icon = MUTE button

EQ icon = short pressing EQ/LOUD button

icon : Popping up BLUETOOTH PHONE interface(after pairing and connecting
a mobile phone with bluetooth function).

icon = button

icon = button

and icons = and button

icon: To enter source me nu.

LOUD icon : Same as the LOUD but ton on the remote con trol.

SWF icon : Same as the SW button on the remote contro l.

) using your mobile phone with bluetooth function to audio/video
if it the audio of the mobile phone will change
into .

The Boss Audio(BV10.1B) supports A2DP, which enables the user to stream audio

from their device

) T the car A/V system so these icons on
the BT Music interface except BT Music and their buttons on control
panel or on remote control are available for audio/video playback of your mobile
phone during playback. But n for / icon
and / buttons, and the function of resume playback after pausing or stopping
is available only for some mobile phone

to display BT, to

BLUETOOTH

2 When the play ,

is paired and connected to the unit,

the car A/V system

3 he bluetooth device of supports AVRCP,

corresponding

o fast forward/backward functions

.

* If you don’t want to use the bluetooth function of the car A/V system , long press
SEL button then use VOL knob or VOL+ and VOL- buttons switch
off .

Disc/USB/Card Operation

1. Loading or unloading a disc, USB or card

1.1 Loading a disc, USB or card

To play files in a disc, insert a disc with label surface up into disc slot. it will
automatically play.

* Caution of Disc Handeling

1) Handle a disc by its edge, do not touch the surface of play side.

2) Before inserting a disc, wipe the disc outwards from the disc

center with a clean, soft, dry, lint-free cloth. Do not use solvents
/thinner such as petrol/benzine, cleaner.

3) After ejecting a disc, place the disc inside of a disc case.

USB: To use a USB function, open the port cover, insert the USB flash drive
and the unit will begin to play the files automatically.

SD: To use a SD function, remove the control panel, insert the SD card. Re­ attach the control panel and the unit will begin to play the files automatically.

Label
surface up

-18-

Label side
facing upward

Press in till heard a “CLICK”

MIC

1.2 Unloading a disc, USB or card

To unload the disc in disc slot, use STOP button to stop playback and then press
button on control panel or touch icon on source menu to eject disc, then

remove it.

To remove the USB flash drive or SD card, press STOP and you may now remove
the respective media.

* During MP3/WMA playback, the information of file, folder, title, artist and album
will be scrolling on LCD display. As long as the current playing MP3/WMA music
contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items
underlined above will be scrolling on LCD display; otherwise, they will not.

* There is ESP function for all formats of discs.

2. Function Icons

2.1 Function Icons-board of Digital Video/CD(Video)/MPEG4/Image/MP3/WMA

During Digital Video/CD(Video)/MPEG4/Image playback, tapping any place on
touch screen can pop up Function Icons-board 1 as next page, then tap icon
to pop up Function Icons-board 2 as next page.

During MP3/WMA playback, tapping any place except folder area, track area and
MP3/WMA&Image&MPEG4 icons can pop up Function Icons-board 1 same as one
of Digital Video/CD(Video)/MPEG4/Image, then tap icon to pop up Function
Icons-board 2 same as one of Digital Video/CD(Video)/MPEG4/Image.

WM AWM A

Mp 3Mp3

[M P 3 ][M P 3 ]

IT LE / S ON G: T RAC K 03 / IT LE / S ON G: T RAC K 03 /

00 100 1

00 200 2

00 300 3

00 400 4

00 500 5

00 600 6

00 700 7

00 800 8

00 700 7

00 100 1

00 200 2

00 300 3

Folder area Track ar ea

MP3/WMA icon Image i con MPE G4 ic on

-19-

Remove the memory card Pres s th e SD card unt il y ou hear a "cl ic k”

Function Icons-boa rd 1 Function Icons-boa rd 2

The Function Icons-boards display as follows:

* Some icons on the Function Icons-boards descript as follows:

: Same as MUTE button.

: Same as VOL- button or rotating
VOL knob with anti-clock wise.

: Same as VOL+ button or rotating
VOL knob with clock wise.

: Poping up source Menu.

: Poping up Function Icons-board 2.

2.2 CD interface

During CD playback, the CD interface displays as follows:

* Some icons on the CD interface descript as follows:

: Same as EQ button.

CLK : Same as CLK button.

LOUD: Same as long pressing EQ button.

SWF : Same as SW button.

: Poping up Function Icons-board 1.

: Poping up BLUETOOTH PHONE in­ terface(after pairing and connecting a
mobile phone with bluetooth function).

: Redialing the last phone number.

-20-

SWF icon = SW button(long pressing)

LOUD icon = EQ button(remote control)(long pressing)
MUTE icon = MUTE button

and icons = VOL- and VOL+ buttons= VOL knob
EQ icon = EQ button
icon : press it to pop up BLUETOOTH PHONE interface(after pairing and
connecting a mobile phone with bluetooth function)
icon: To enter source menu.

-21-

3. Function of controls on the touch screen/main unit/remote control

1. icon or button
During playback, use it to pause playback; in pause mode, use it to resume play­ back.
In CD mode, this function icon is .

2. icon or button
During Digital Video/CD(Video)/CD/MP3/WMA playback, tapping or pressing it

pre-stop or pause playback; in pre-stop or pause mode, use icon or button
to resume playback.
During playback, tapping or pressing it twice to fully stop playback; in fully stop
mode, use icon or button to start playback from the beginning of the media.

During MPEG4/image playback, use icon or button to display root menu as
follows:

During MP3/WMA playback, the root menu above displays all the time.

/chapter

* Tapping folder icon, track icon or kind icon can execute the operation above.

3. / icons or buttons
During playback, continuously tapping or icon or continuously pressing
or button on remote control or continuously and long pressing or button

When displaying root menu, use < or > button to highlight the current chapter/

track, the current folder or the kind icons.

* If there are no track for a kind icon, you can’t highlight the kind icon.

When highlighting a kind icon, press ENTER button to enter it.

When highlighting the current folder, use v or ^ button to highlight other folders
and then press ENTER button to enter it.

When highlighting the current track, use v or ^button to highlight other tracks and
then press ENTER button to play it.

* For image, after highlighting a track, press ENTER button to display only the high­ lighted track; press >|| button to display all tracks step by step from the highlighted
track.

WM AWM A

Mp 3Mp 3

[M P 3 ][ M P3 ]

IT LE / S ON G: T RAC K 03 / IT LE / S ON G: T RAC K 03 /

00 100 1

00 200 2

00 300 3

00 400 4

00 500 5

00 600 6

00 700 7

00 800 8

00 700 7

00 100 1

00 200 2

00 300 3

Folder ar ea Track ar ea

MP3/WMA ic on Image icon MPEG4 ic on

MEN UMEN U

PBCPBC

MEN UMEN U

PBCPBC

MEN UMEN U

PBCPBC

MEN UMEN U

PBCPBC

MEN UMEN U

PBCPBC

MEN UMEN U

PBCPBC

MEN UMEN U

PBCPBC

on control panel can fast backwards or forwards at the following multiple of normal

speed: x2, x4, x8, x20, x1.
During fast playback, use icon or button to resume normal playback.
For image files, no this function.

4. / icons or / buttons
During playback, use one of them to play previous or next chapter/track.
During playback, long pressing or button on control panel can fast
backward or forward at the following multiple of normal speed: x2, x4, x8, x20, x1.

5. Number buttons
During Digital Video/CD(Video)(PBC OFF)/MPEG4/Image/CD/MP3/WMA playback,
use number buttons to input chapter/track SN. , then it will play or display it.

digit in s place digit

in

(

6. icon and MENU button
During Digital Video playback, use MENU icon or button to display the current
chapter list, then use direction buttons to select your desired chapter and then

press ENTER button to play it.

For CD (Video), the MENU function is disabled, track list is displayed on the
monitor screen by pressing TITLE/PBC button or tapping icon.

t

7. icon and TITLE/PBC button

During Digital Video playback, use TITLE/PBC button to display title list; then use
direction buttons to select your desired title and then press ENTER button to open

the chapter list of the title; then use direction buttons to select your desired chapter
and then press ENTER button to play.

* You can also tap a desired title and then chapter to play.

During CD(Video) playback, use icon or TITLE/PBC button to switch PBC
mode on or off. When PBC mode is switched on, it will play from the beginning of

media till it displays a track list. When a track list is displayed, use the number
buttons to select your desired track to play.

For CD, the TITLE/PBC button is disabled.

To input a chapter/track with an SN that is equal to or bigger than 10, use the +10

button to input the ten and then use 0-9 button to input the

units order.

I.e. +10 ~ 1 = 11 (number 11 chapter/track will be displayed/played.)

During CD video) playback, when it is in PBC ON mode, the number buttons are

disabled.

For MPEG4/image, MENU button and icon are disabled, root menu is displayed
on the monitor screen by pressing button or tapping icon.

For MP3/WMA, MENU button and icon are disabled, root menu displays on
the monitor screen all the time. Root menu of MP3/WMA is same as the one of
MPEG4/image.

For CD, he MENU function is disabled.

For MP3/WMA/MPEG4/image, icon and TITLE/PBC button are disabled.

-22-

8. icon and GOTO button
For Digital Video/MPEG4/CD(Video)/image/MP3/WMA, you can use , , ,

number and icons or GOTO, <, >, number and ENTER buttons to select a
chapter/track or from a playback time point to play.

During playback, tap icon or press GOTO button to display changeable
playback information bar as follows:

Digital Video:

MPEG4:

CD(video):

Image:

MP3/WMA:

* During playback, tapping icon can also display the Goto Function icons-board
as follows:

When displaying the changeable playback information bar, use / icon or
< or > button to highlight title SN.(only for Digital Video) , chapter/track SN. or
elapsed time of current chapter/track(disabled for image).

When highlighting title SN. or chapter/track SN. , use number icons or buttons to
input desired SN. of title or chapter/track, then use icon or ENTER button to
play the selected chapter/track.

When highlighting elapsed time of current chapter/track(disabled for image), use
number icons or buttons to input desired playback time point for the playback time
of the whole media for Digital Video/CD(Video) and of the current chapter/track for
MPEG4/MP3/WMA, then use icon or ENTER button to play from the play-

back time point.

9. icon or ZOOM button
During Digital Video/CD(Video)/MPEG4/image playback, use icon or ZOOM
button to switch zoom mode between ZOOM 2, ZOOM 3, ZOOM 4, ZOOM ½,

ZOOM 1/3, ZOOM 1/4 and ZOOM OFF.

When zooming in video/image, use direction buttons to move video/image
upwards, downwards, rightwards or leftwards.

For CD, GOTO button is disabled.

When not zooming in image, direction buttons can switch on 4 fixed rotated

angles between >=90 deg cw, <=90 deg ccw, ^=UP-DOWN and v=LEFT-RIGHT.

-23-

icon and are

For CD, the ZOOM button is disabled.

10. OSD icon or button

During Digital Video /MPEG4/Image/MP3/WMA playback, use OSD
icon or button to display playback information bar as bellows:

Digital Video:

MPEG4:

CD(Video):

Image:

MP3/WMA:

11. icon or REPEAT button
During Digital Video playback, touch icon or long press RPT button to switch
repeat mode between REP CHAPTER, REP TITLE, REP ALL and REP OFF.

touch icon or long press

to E 1

For MP3/WMA, ZOOM button disabled.

/CD(Video)

For CD , OSD button is disabled.

During CD(Video)(PBC OFF)/CD playback, RPT

button switch repeat mode between R P , REP ALL or REP OFF.

-24-

During MP3/WMA/MPEG4/image playback, touch icon or long press RPT button

to switch repeat mode between REP1,REP FOLDER(or DIR),REP ALL or REP OFF.

During CD(Video)(PBC ON) playback, icon and RPT button are disabled.

2

For MPEG4/image/CD(Video)(PBC ON) playback, RDM button

disabled.

14

During CD(Video) playback, use button to switch audio channels
between MONO L, MONO R, MIX MONO and STEREO.

For MPEG4/MP3/WMA image, button disabled.

For CD(video), button disabled.

1 . icon or RDM button

During Digital Video/CD(Video)(PBC OFF)/CD/MP3/WMA playback, tapping

icon or long pressing RDM button switches random mode on or off.

icon and are

13. icon or INT button

During CD(Video)/CD playback, tapping icon or long pressing INT button
switches intro mode on or off.

For Digital Video/MP3/WMA/MPEG4/image, icon and INT button are disabled.

. icon or button

During Digital Video playback, use icon or button to switch between audio tracks
(depending on the current playing media).

/CD icon or

/ icon and are

15. icon or button

During Digital Video playback, use icon or button to switch subtitle languages
on or off(depending on the current playing media).

icon and are

For CD, the button is disabled.

16. ANGLE icon or button
During Digital Video playback, use ANGLE icon or long press ANGLE button to
play in different angles (depending on the current playing media).

For CD(video), the ANGLE icon and button are disabled.

For CD, the ANGLE button is disabled.

-25-

17. icon or SETUP button
Use icon or SETUP button to enter Media Setup Menu for setting up all media
parameter values.

Use icon or SETUP button to display Media Setup Menu(the default page is
SYSTEM SETUP);

Media Setup Menu has 4 pages in all. When highlighting a page, tap the aim page
icon or press > or < button to highlight another page;

After selecting a page, tapping the aim item icon or press ^ or v button to highlight
a setup item in the selected page;

After selecting a setup item, tapping the aim value; or press > button to enter the
setup item, then press v or ^ button to select a desired value, finally press ENTER
button to confirm it.

After finishing setting, tapping EXIT icon or press SETUP button to exit Media
Setup Menu to resume normal playback.

1) SYSTEM SETUP

TV SYSTEM
This setup item is for setting up video system in NTSC, PAL or AUTO .

If you set a non-matched video system for playing a video, the playing video will
display white-black or flash.

SCREEN SAVER
This setup item is for switching screen saver on or off.

TV TYPE
This setup item is for setting up video display size.

Description of the 4 pages:

TV S YS T E M
SC R E EN SAV E R
TV T Y P E
PAS S WO R D
RAT I N G
DE FAU LT

SYST EM SE TUP

E X I T

-26-

(1) 4:3 PS: Choose this item when connecting a monitor with 4:3 screen. When
playing video with 16:9 size, the left and right part of video will be cut out, and
video will display in full screen.

(2) 4:3 LB: Choose this item when connecting a monitor with 4:3 screen. When
playing video with 16:9 size, the top and bottom part of the monitor screen will
be turned into a black square .

(3) 16:9: Choose this item when connecting a monitor with 16:9 wide screen.

PASSWORD
This setup item is for locking or unlocking parental control. The default mode
is locked. The default unlocking password is 0000.

To lock or unlock parental control:
(1) Highlight PASSWORD item and then press > or ENTER button to enter it;
(2) Input password 0000;
(3) Press ENTER button to confirm, then it will unlock or lock parental control.

* e of the PASSWORD

RATING
This setup item is for setting a new rating level of parental control.
(1) First highlight PASSWORD item to see whether parental control is locked or not.
If it is in locked mode, unlock parental control referring to PASSWORD above.
(2) Highlight RATING item and press > or ENTER button to enter it, then use ^ or v
button to select your desired rating level, and then press ENTER button to
confirm.
(3) Highlight PASSWORD item again and then press > or ENTER button to enter it,
then input password 0000, and press ENTER button to lock parental control
again.

DEFAULT
This setup item is to change all parameter back to the default factory values.

2) LANGUAGE SETUP

Remove th section of the User Manual to keep this sensitive

information confidential.

OS D L A NGUAG E
AU DIO L A NG
SU B T ITL E L ANG
ME N U L ANG

LA N GU AG E SE T UP

E X I T

-27-

OSD LANGUAGE
This item is for selecting the type of language displayed on the screen except for

subtitle language and menu language(depending on current playing media).

AUDIO LANG
This item is for selecting the type of audio language(depending on current playing
media).

SUBTITLE LANG
This item is for selecting the type of subtitle language(depending on current
playing media).

MENU LANG
This item is for selecting the type of menu language(depending on current playing
media).

3) VIDEO SETUP

BRIGHTNESS

For adjusting brightness of video output.

CONTRAST
For adjusting contrast of video output.

HUE
For adjusting hue of video output.

SATURATION
For adjusting saturation of video output.

SHARPNESS
For adjusting sharpness of video output.

BR I G HTN E SS
CO N T RAS T
HU E
SAT U R ATI O N
SH A R PNE S S

VI D EO S E TU P

E X I T

-28-

4) DIGITAL SETUP

DYNAMIC RANGE
This item is for adjusting linear compression ratio. If you set it to FULL,
Peak-to-Peak value of audio signal is minimum; if you set it to OFF, Peak-to

-Peak value is maximum.

DY NA M I C RAN G E

DI G ITA L S ET U P

E X I T

-29-

AUX IN operation

An external AV system can use the car AV system as monitor and amplifier.

1. Use an AV cable to make the car AV system and the external AV system connected
through the AUX IN jack on control panel of the car AV system and the AV Out jacks

of the external AV system.

2. Play the external AV system, then use SOURCE button or the Source Menu to enter
AUX IN mode for the car AV system. By now, the program played by the external
AV system can be output through the monitor of the car AV system and the
speakers connected to the car AV system.

* The icons on the AUX interface descript as follows:

and icons = VOL- and VOL+ buttons = VOL knob
MUTE icon = MUTE button
EQ icon = short pressing EQ/LOUD button
LOUD icon = long pressing EQ/LOUD button
SWF icon = long pressing SW button
icon : press it to pop up BLUETOOTH PHONE interface(after pairing and
connecting a mobile phone with bluetooth function)
icon: To enter source menu.

3. In AUX IN mode, you can use SEL, +, -, VOL, MUTE, EQ , SW and LOUD buttons
or icons to adjust audio and video.

-30-

3.5 mm Audio Cable

MIC

External iPod operation

An external iPod can use the car AV system as a monitor and amplifier.

1. Use the iPod cable to make the car AV system and the external iPod connected
through the AUX IN jack on control panel of the car AV system and the headphone

port of the external iPod.

2. Play the external iPod, then use SOURCE button to enter AUX IN mode for the car
AV system. By now, the program played by the external iPod can be output through
the monitor of the car AV system and the speakers connected to the car AV system.

* The icons on the AUX interface descript as follows:

: Popping up Source Menu.

: Same as VOL+ button or rotating
VOL knob with clock wise.

: Same as VOL- button or rotating
VOL knob with anti-clock wise.

Icon : press it to pop up BLUETOOTH PHONE interface(after pairing and

connecting a mobile phone with bluetooth function)

3. In AUX IN mode, you can use SEL, +, -, VOL, MUTE, EQ , SW and LOUD buttons
or icons to adjust audio and video.

H ph ne p ortead o

EQ : Same as EQ button.

MUTE : Same as MUTE button.

SWF : Same as long pressing SW button.

LOUD: Same as long pressing EQ button.

-31-

MIC

REAR VIEW CAMERA

The car AV system can make you look at the actual status behind your car when
you change the gear level to the back position.

1. Use an video cable to make the car AV system and the rear view camera con­ nected through the REAR CAMERA INPUT jack in the rear cabinet of the car AV
system and the VIDEO OUTPUT jack of the rear view camera.

Make the REAR CAMERA SWITCH line in the rear cabinet of the car AV system
connected to (B+)12V power supply.

2. When you change the gear level to the back position, the screen of the car AV
system will display the actual status behind your car.

* Note : the external monitor can not display the actual status behind your car.

-32-

Troubleshooting

Please read the user manual car efully before using the BV10.1B car A/V sy stem. If you
have any difficulty using th e BV10.1B car A/V system, .
If you still after u sing all the suggestions, please
contact

NO PICTURE, SOUND
* Ensure that the power switch is o n.
* Ensure that the power cord is not d amaged or the fuse is not blown.

No sound
* Ensure that the player’s audio output speaker ’s audio
input.
* Check whether the audio connector is damaged.
* Check whether you have turned d own the volume.
* Ensure that the audio is not in MUT E mode.

BLACK AND WHITE PICTURE OR SCREEN ROLLING
* Ensure that you have set right mo de of video system (e.g. PAL, NTSC).

Distorted Picture/Sound
* Check whether disc is scratch ed or stained.
* Check whether AV connector and output terminal is stained.
* Check whether there is conden sation inside the lens. If so, power on the playe r and do
not work for an hour or so, the n try again.

No Disc/Bad Disc Displayed
* Ensure that you have inserted a d isc into the disc slot.
* Check whether disc is inserted with label side upwards.
* Check whether disc is bent.
* Check whether disc is stained o r scratched badly.
* Ensure that disc format is compatible to the player.
* Ensure that temperature ins ide the car is not too high. If so, cool off until the ambient
temperature returns to norm al.
* Insert another disc into the disc slot.

Remote Control functi ons intermittently
* Check whether the lithium cel l of the remote control is powerful and working properly.
* Direct the IR emitting window o f the remote control to the IR sensor of main u nit.
* Check whether there are some obstacles between remote control and main unit.

SOME FUNCTION BUTTONS DO NOT WORK
* Turn off ACC power, then turn on again .
* Reset the unit, then turn on agai n.
* Remove control panel from cha ssis, reattach it onto the chassis and th en turn it on again.

Intermittent radio re ception
* Check whether antenna cable is connected firmly.
* Manually tune for a stati on.

refer to the troubleshootin g guide

are unable to resolve the problem

your dealer or an authorised service centre .

is properly connected to the

-33-

Specification

General

Power Supply......................................................................DC 12V

Current consumption........................................................10A MAX.

Audio

Preamp.............................................Front, Rear, & Subwoofer Output

Frequency Response...................................................20 Hz - 20 KHz

S/N Ratio................................................................................... 90 dB

Wow and Flutter............................................Below measurable limits

TFT Monitor

Monitor Screen Size.............................................................10.1 Inch

Color System.....................................................................NTSC/PAL

Disc/USB/Card

Compatible Format.......DVD-R/RW, CD-R/R W (Audio & Video), MP3, WMA, Mp4

Radio

FM

Frequency range.....................................87.5 MHz - 107.9 MHz(US)

87.5MHz - 108.0MHz(EU)

Usable sensitivity.................................................................15dBu

I.F Frequency..................................................................10.7 MHz

MW

Frequency.................................................5 30 KHz - 1710 KHz(US)

522 KHz - 1620 KHz(EU)

Usable sensitivity.................................................................40dBu

I.F Frequency....................................................................450 KHz

Bluetooth:

Bluetooth specification..........................................Version: 1.2, Class 2

Bluetooth profile support...............................A2DP,AVRCP, HSP, HFP

Range...............................................................................33 ft (10 m)

NOTE:

Specifications are subject to change without notice.

-34-

Made in china