Bose CC-4 User Manual
Bose® ControlSpace™ CC-4 Room Controller
Installation Guide
Important Safety Instructions
For the intended audience
This guide has been written for professional installers of sound systems.
1. Read these instructions – for all components before using this product.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in the installer’s guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth – and as directed by Bose.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way such as: liquid has been spilled or objects have fallen into the
apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped. Do not attempt to service this product yourself. Opening or removing covers
may expose you to hazards. Please call Bose to be referred to an authorized service center near
you.
10. See product enclosure for safety-related markings.
11. Only use attachments/accessories specified by the manufacturer.
CAUTION: Check local regulations before installing the Bose
building code may require professional installation by a skilled technician or licensed contractor. Regional electrical codes may require similar qualifications for wiring the system.
Please read this install guide
The Bose ControlSpace CC-4 Room Controller is engineered to provide custom on-site controls for the
ControlSpace ESP-88. Please read this guide to help you install and use the interfaces correctly.
®
ControlSpace™ CC-4 Room Controller. The
©2007 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used
without prior written permission.
2
Provided in carton
Not provided
Cable*
Required for installation
Double-gang
junction box
*Shielded, data-grade cable (22-24 AWG or 0.34-0.25mm2) is recommended.
Limit runs to 500 ft for shielded cable, 100 ft for unshielded.
Note: Use only cables which are acceptable by the local or national code.
3
Loading...