Bosch XL-CART Instructions
XL-Cart
™
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
PINCH POINTS
Keep clear durning operation.
1
3
5
7
6
2
4
A
1
A
2
D1 D2
8
POINTS DE PINCEMENT
Ne pas s’en approcher pendant
le fonctionnement
PUNTOS DE APLASTAMIENTO
Manténgase alejado durante
la utilización.
BM 2610038149 01-15_BM 2610022342 10-12.qxp 1/16/15 1:20 PM Page 1
Read the manual & instructions before
operating this equipment. Failure to follow
all instructions may result in serious personal injury & property
damage.
SAVE ALL WARNINGS AND INSTRUCTIONS
F
OR FUTURE REFERENCE
Keep body parts out off pinch points.
Body parts caught in pinch points while
adjusting handles 1,2 and footplate 6 can lead to personal
injury (see figure A for pinch points).
U
se caution when using XL-Cart™ to
transport load so as to avoid tipping or
loss of balance.
When using the XL-Cart to transport
tools, L-BOXXes, or any other objects, be
aware of your own physical abilities. Do not exceed your
own strength, balance, or range of motion. Start with lower
weights and work up.
• Do not exceed the maximum load capacity of 300 lbs (136
kg) on flat surface and 75 lbs (34kg) on stairs, ramps, or similar surfaces.
• Only load/unload the XL-Cart™ when footplate 6 is resting
on the floor (Figure D1).
• Load must not hinder a secure grip around the handle 1 with
both hands.
• Secure load with strap 4 before use.
• Do not use on unstable or uneven surfaces.
• Use caution when using XL-Cart™ on sloped surfaces,
ramps, or stairs.
• Make sure the load is evenly distributed on the cart.
• Use the L-Boxx fixing rails 7 on the footplate 6 to transport
L-Boxxes. The fixing rails 7 give L-Boxxes stability and help
prevent them from slipping.
• Take caution to avoid bodily strain or any injury when transporting loads.
OPERATING INSTRUCTION
Open and Close XL-Cart
To open XL-Cart: Unlock folding footplate 6 from its secured
position and pivot until footplate 6 is in horizontal position and
wheels 5 are expanded (Figures B1-B3).
To close XL-Cart: Unfold and lift footplate 6 from flat locked
position until it is flush against the XL-Cart™ and the wheels
5 are fully contracted against the back of the XL-Cart™
(Figures E3-E5).
Extend and Retract Handle
To extend handle 1: Push release button 3 and pull handle 1
upward until an audible click is heard, indicating handle 1 is
locked in the extended position (Figures B3-B5).
To retract handle 1: Push release button 3 and push down on
the top of the handle 1 until an audible click is heard, indicating the handle 1 is locked into place (Figures E1-E3).
Keep body parts out off pinch points.
Body parts caught in pinch points while
adjusting handles 1,2 and footplate 6 can lead to personal
injury (see figure A for pinch points).
• For extra maneuvering control, open auxiliary handles 2
(
Figure C).
XL-Cart™ Transport Usage
1. Open XL-Cart.
2. Make sure footplate 6 is resting on flat level surface that is
capable of supporting the weight.
3. Load L-Boxx or load to the footplate 6.
Note: Use the L-Boxx fixing rails 7 on the footplate 6 to
transport L-Boxxes.
The fixing rails 7 give L-Boxxes stability and help prevent
them from slipping.
Make sure the load is evenly distributed on the cart.
Do not exceed the maximum load capacity of 300 lbs (136 kg) on flat surface and
75 lbs (34kg) on stairs, ramps, or similar surfaces.
4. Loop tension strap 4 around L-Boxx or other loads (figure
D2).
Press buckle release lever 8, insert belt through tension
strap buckle and pull belt until tension strap 4 is tight.
Ensure L-BOXXes™ or any other loads are firmly secured
with tension strap 4 before operating the XL-Cart.
5. Extend XL-Cart handle 1.
6. Grip XL-Cart handle 1 with both hands to transport load.
MAINTENANCE
• Regularly check to ensure XL-Cart™ is in proper operating
condition.
• Do not use the XL-Cart™ if damaged.
• Regularly oil the moving metal/aluminum parts.
• Do not store the XL-Cart™ in a damp environment.
• Clean the XL-Cart™ with a damp cloth when needed.
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
BM 2610038149 01-15_BM 2610022342 10-12.qxp 1/16/15 1:20 PM Page 2
Loading...