Bosch VBN-5085-C21 Specsheet

960H

Video | DINION AN 5000

DINION AN 5000

www.boschsecurity.com

u Ultra high resolution 960H sensor

u High Dynamic Range to see bright and dark details

simultaneously

The DINION 5000 family combines high resolution with
high dynamic range in a true day/night analog camera.
The high performance 960H 1/3-inch CCD sensor with
a resolution of 720TVL, the high dynamic range engine,
and the advanced image processing technology
combine together to provide a detailed image with
outstanding accuracy in color reproduction even under
harsh lighting conditions. True day/night performance
ensures the highest image quality possible at any time,
day or night. The camera is easy to install and ready to
use, and offers the best solution for demanding scene
conditions.

System overview

The camera is supplied ready to operate – simply
attach the lens, connect video and then power. Six
distinct pre-programmed operational modes are stored
in the camera. Recall the mode that suits your
application for optimized performance. The lens
wizard ensures accurate back-focusing for perfectly
sharp pictures at all times. For especially challenging
situations where fine tuning or special settings are
required, the camera parameters can be individually
set using the control buttons on the side of the
camera and an Onscreen Display (OSD).

u Detail enhancement

u Bilinx communication for remote set-up and control

u Easy to install

Functions

Detail in extreme lighting

In harsh lighting, the difference between the brightest
and the darkest parts of a scene can be extreme. To
produce a clear picture in these conditions, the CCD
sensor in the camera generates two images; one long
exposure to resolve details in the scene’s darkest
areas, and one short exposure to resolve details in the
scene’s brightest areas. The advanced image
processing technology in the camera combines these
dual shutter images, mixing pixels from each exposure
to produce the most detailed image possible. The
superior wide dynamic range for all lighting conditions
reveals details previously unseen.

Day/Night mode

The day/night mode provides enhanced night viewing
by increasing the IR sensitivity. The IR filter can switch
from color to monochrome automatically by either
sensing the illumination level or via the alarm input.
The filter can be switched manually via the alarm
input, through the camera menu or via the Bilinx
coaxial control interface. An internal through-the-lens
IR detector enhances the monochrome mode stability,
as it prevents reverting to the color mode when IR
illumination is dominant. IR contrast is also measured
and used to handle reflected IR light in outdoor
scenes.

2 | DINION AN 5000

Ease of installation

The lens wizard helps focus the lens at the maximum
opening to ensure proper back-focus is maintained
throughout the 24-hour cycle. No special tools or
filters are required.
Six independent, pre-programmed operating modes
support typical applications, but are fully
programmable for individual situations. Switching
between modes is easy via Bilinx or the external alarm
input.
Several other features are available that make
installation easy:

• Power and alarm cable connectors which can be
removed even when the camera is mounted.

• A built-in test pattern generator produces signals to
test and fault-find cables.

• A multi-language On-Screen Display (OSD).

• A high efficiency power supply improves maximum
operating temperature

Cable compensation is used to avoid the need for
amplifiers in long distance coaxial connections up to
1000 m (3000 ft). It can prevent the image quality
degradation caused by signal losses from long cable
lengths.

Bilinx technology

Bilinx is a bidirectional communication capability
embedded in the video signal of this camera. Installers
can check status, change camera settings and even
update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation
time, provides for more accurate set-up and
adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.

Ideal picture performance

There are many settings available to help fine-tune the
picture performance to match your installation
environment. These include:

• Smart BLC – automatically and dynamically
compensates for strong backlight

• Peak White Invert – reduces glare from highlight
areas

• Contrast and sharpness – enhance details in bright or
misty scenes

• SensUp – sensitivity is dramatically enhanced by a
factor of 10

• Default shutter – improves the motion performance in
auto exposure mode

• Dynamic noise reduction – dynamically reduces noise
in the picture

Privacy masking

Fifteen different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.

Video Motion Detection

The built-in video motion detector allows you to select
four programmable areas with sensitivity thresholds.
When motion is detected, alarms can be displayed in
the video signal, the output relay can be closed or an
alarm message can be transmitted via Bilinx.

Typical applications:

• Entrance foyer or lobby with glare

• Outdoor perimeters
– low light
– IR light

• Traffic monitoring
– highway
– traffic intersections
– emergency response coordination

• Tunnels

• Car parks (outdoor)

• Restricted access locations such as:
– prisons
– ports / freight terminals
– military facilities
– border control and homeland

• Casino and gambling centers

Certifications and approvals

Standards FCC Part15 Subpart B, Class B

EN 55022 class B

EN61000-3-2

EN61000-3-3,

EN 50130-4

EN 50121-4

Camera with 500 g (1.1 lbs) lens

VBN-5085-C11/
VBN-5085-C21

VBN-5085-C51 EN60950-1

Product certifications CE, FCC, UL, cUL, C-tick

Region Certification

Europe CE

USA UL

FCC

Canada CSA

according to IEC 60068-2-6

EN60950-1,
UL60950-1 (2ND edition),
CSA C22.2 No. 60950-1-07 (2
edition)

ND