Bosch PBP6C5B60M Instruction manual
Ú Installation instructions
Gas hob
01
140998
Ú Installation instructions
Safety precautions .....................................................................4
Before installing .........................................................................4
Preparing the units..................................................................... 4
Installation of appliance ............................................................5
Setting up the appliance ...................................................................5
Removal of hob ..........................................................................6
Set-up, gas and electricity connection..................................... 6
Gas connection ...................................................................................6
Faults in the gas installation/smell of gas .....................................6
Electrical connection ..........................................................................6
Types of connection ..................................................................7
Connection for natural gas (NG) .....................................................7
Liquid gas connection (LPG) ............................................................8
Conversion to a different gas type ...........................................8
Measures to note ................................................................................8
Converting to a different gas type ...................................................8
Parts for the gas conversion.............................................................9
Converting the appliance from natural gas to liquefied gas
(LPG) .....................................................................................................9
Converting the appliance from liquid gas to natural gas............9
Replacing the burner nozzles........................................................ 10
Adjusting or replacing the bypass nozzles................................. 10
Removing the hob plate ................................................................. 11
Replacing the bypass nozzles....................................................... 11
Installing the hob.............................................................................. 12
Leak test and function test......................................................12
Check the gas connection ............................................................. 12
Checking the burner nozzles......................................................... 12
Checking the bypass valves..........................................................12
Correct flame formation........................................................... 12
Burner ................................................................................................12
Technical data – Gas................................................................ 13
3
Safety precautions
Read the appliance instructions before installing and using.
The graphics in these Assembly instructions are given as a
guide only.
The manufacturer is exempt from all liability if this manual's
requirements are not complied with.
All operations relating to installation, regulation and
conversion to other gas types must be carried out by an
authorised installation engineer, respecting all applicable
regulations, standards and the specifications of the local gas
and electricity providers.
You are recommended to contact the Technical Assistance
Service to convert to another gas type.
Before you begin, turn off the appliance's electricity and gas
supply.
This appliance has been designed for home use only, not for
commercial or professional use. This appliance cannot be
installed on yachts or in caravans. The warranty will only be
valid if the appliance is used for the purpose for which it was
designed.
Before installing
This appliance is class 3 type, according to the EN 30-1-1
regulation for gas appliances: built-in appliance.
The units next to the appliance must be made of non-flammable
materials. The laminated covering and glue for adhering it must
be heat resistant.
This appliance cannot be installed above fridges, washing
machines, dishwashers or similar.
After connecting the appliance, check that the local conditions
(type of gas and pressure) are compatible with the appliance
settings. The permissible appliance settings can be found on
the label or rating plate.
These instructions are only valid if the appropriate country
symbol appears on the appliance. If the symbol does not
appear on the appliance, it is necessary to refer to the
technical instructions which will provide the necessary
instructions concerning modification of the appliance to the
conditions of use of the country.
This appliance can only be installed in a well-ventilated place in
accordance with existing regulations and ventilation
specifications. The appliance must not be connected to a
combustion product removal device.
The supply cable must be attached to the unit to prevent it from
touching hot parts of the oven or hob.
Appliances with electrical supply must be earthed.
Do not tamper with the appliance's interior. If necessary, call
our Technical Assistance Service.
If the hob is installed above an oven, it must have forced
ventilation. Check the dimensions of the oven in your
installation instructions.
If an extractor hood is fitted, this must be done according to the
installation instructions and always allowing for a vertical
minimum clearance of 650 mm to the hob.
Preparing the units
Make an appropriate size cut in the work surface.
The appliance must be set up and inserted in accordance with
the specified dimensions. The appliance must not be set up on
any other object.
If the hob is electric or mixed (gas and electricity) and there is
no oven below, place a non-flammable separator (e.g. metal or
plywood) 10 mm from the bottom of the hob. This will prevent
access to the base of the hob.If the hob is gas, it is
recommendable to place the separator at the same distance.
Seal all work surfaces made of wood with special sealer/glue
to protect it against moisture damage.
¸
PLQ
PD[
PLQ
)
&
(
%
$
Distance Designation
A Distance between the appliance and the right
vertical surface
B Distance between the appliance and the left ver-
tical surface
C Distance between the appliance and the rear
vertical surface
Caution!
■ You can install the appliance between two vertical surfaces
that are next to each other, e.g. D and F or E and F.
■ You cannot install the appliance between two vertical
surfaces that are opposite each other, e.g. D and E.
'
4
When you install the built-in cooker, comply with the dimensions
given in the table below.
Note: Use the data in the table below that corresponds to your
appliance.
Installation of appliance
Note: Wear protective gloves to fit the hob.
Remove the pan support, handles, burner cap and burner
heads.
Appliance type Minimum
Products with hob
plate made of
glass
Products with hob
plate made from
steel/enamel
distance A
(mm)
100 60 50
100 80 50
Minimum
distance B
(mm)
Minimum distance C (mm)
Turn the appliance over carefully and place it on a soft cloth.
Make sure that the ignition parts are not damaged.
The adhesive seal provided prevents leaks. Adhere it to the
work surface around the cut-out. It must be adhered around the
edge of the area cut out.
Fitting the appliance onto the kitchen unit:
1. Remove the clips from the accessory bag and screw them
into the position indicated so that they can turn freely.
2. Insert and centre the hob.
Press the sides of the hob until it is supported around its
entire perimeter.
3. Turn the clips and tighten them fully.
The position of the clips depends on how thick the work
surface is.
Do not stick the hob onto the worktop with silicone.
Setting up the appliance
■ The distance between the top edge of the cooker and the
bottom edge of the extractor hood must meet the
requirements of the extractor hood manufacturer.
■ Ensure that the appliance is not moved again after set up.
■ The underside of the appliance heats up during operation.
We therefore recommend that you install a guard plate on the
underside of the appliance.
PD[
PLQ
5
Loading...