Communications Systems | Sound projector, 10W, uni-directional
LP1-UC10E-1 Sound projector, 10W, unidirectional
www.boschsecurity.com
u Superb speech and music reproduction
u Integrated connection cable
The LP1‑UC10E‑1 is a powerful, 10 W sound projector
intended for high quality speech and music
reproduction in indoor and outdoor applications. The
state‑of‑the‑art design is matched to both modern and
traditional style environments. The sound projector is
suitable for use in voice alarm systems.
Functions
Superb sound quality
The use of a high‑quality driver has resulted in a very
natural sound reproduction with excellent bass
response.
Voice alarm loudspeaker
Voice alarm loudspeakers are specifically designed for
use in buildings where performance of systems for
verbal communication announcements is governed by
regulations. The LP1‑UC10E‑1 is designed for use in
voice alarm systems. The sound projector is pre‑wired
for use with an optional line/loudspeaker supervision
board external mounted. The loudspeaker has built‑in
protection to secure that, in the event of a fire;
damage to the loudspeaker does not result in failure of
the circuit to which it is connected. In this way, system
u Ceiling or wall mounting
u Water and dust protected to IP 65
u EN 54‑24 certified
integrity is maintained; ensuring loudspeakers in other
areas can still be used to inform people of the
situation. The loudspeaker has a ceramic terminal
block, thermal fuse and heat resistant, hightemperature wiring.
The sound projector is made from high-impact selfextinguishing ABS according to class UL 94 V0,
finished in white.
Certifications and approvals
Quality assurance
All Bosch loudspeakers are designed to withstand
operating at their rated power for 100 continuous
hours in accordance with IEC 268‑5 Power Handling
Capacity (PHC) standards. Bosch has also developed
the Simulated Acoustical Feedback Exposure (SAFE)
test to demonstrate that they can withstand two times
their rated power for short durations. This ensures
improved reliability under extreme conditions, leading
to higher customer satisfaction, longer operating life,
and lessons the chance of failure or performance
deterioration.
341
Ø185
Ø144
77
41
Ø185
34
Ø144
303
Ø185
11
14
23
109
120°
27
138
40
6
(13.43)
(7.28)
(5.67)
(1.61)
(3.03)
300
(11.81)
(7.28)
(7.28)
(5.67)
(1.34)
(11.93)
(0.43)
(0.90)
(0.55)
(0.24)
(4.29)
(5.43)
(1.06)
(1.57)
10W
5W
2.5W
0
1.25W
| Sound projector, 10W, uni-directional
2
Safety aspects
In common with all Bosch products, care is taken to
meet high safety standards. All ABS parts are
self‑extinguishing (according to UL 94 V 0). This sound
projector complies with the relevant safety and
installation regulations of EN 60065.
Water and dust protectionaccording to IEC 60529, IP 65
Emergencyaccording to EN 54‑24 / BS 5839‑8 /
EN 60849
RegionCertification
EuropeCE
CEDOP
CEDOC (IP)
CPD
PolandCNBOP
Installation/configuration notes
Mounting
Ease of installation is realized in the way of mounting:
first the mounting plate is fixed to the wall or ceiling,
secondly a safety cord is attached to the mounting
plate, allowing the installer temporarily hang the
loudspeaker during installation. After making the
connections, the sound projector can be fixed to the
mounting plate, by means of a fixing screw nut, and
the horizontal direction can be fixed. A cover plate
covers screws and electrical wiring. The versatile
mounting bracket allows the sound projector to be
horizontal and vertical directed. The vertical direction
can be permanent fixed with a recessed socket head
screw via a small hole located in the rear housing The
cover plate is provided with two cable – or 16 mm
(0.63 inch) conduit entries (covered as standard
supplied) in opposite position, suitable for loopthrough cabling.
Power setting
A ceramic terminal for electrical connection is
provided. The loudspeaker is standard connected to
full power. Half‑power, quarter‑power or eighth‑power
can be selected by connecting the appropriate colorcoded wire to the terminal block.
Dimensions in mm / (in)
Circuit diagram
Frequency response
Polar diagram (measured in pink noise)
| Sound projector, 10W, uni-directional
3
Octave band sensitivity*
Octave SPL
1W/1m
125 Hz84.0--
250 Hz84.3--
500 Hz84.4--
1000 Hz86.0--
2000 Hz89.4--
4000 Hz91.1--
8000 Hz94.3--
A-weighted-88.297.7
Lin-weighted-89.998.8
Octave band opening angles
HorizontalVertical
125 Hz360360
250 Hz360360
500 Hz360360
1000 Hz220220
Total octave
SPL
1W/1m
Total octave
SPL
Pmax/1m
Effective frequency range (-10
dB)
Rated voltage
Rated impedance
Connector3-pole screw terminal
75 Hz to 20 kHz
100 V
10 W1000 Ohm
5 W2000 Ohm
2.5 W4000 Ohm
1.25 W8000 Ohm
* Technical performance data according to IEC
60268‑5
Mechanical
Dimensions (D x L)185 x 300 mm (7.3 x 11.8 in.)
Weight3 kg (6.6 lb)
ColorWhite (RAL 9010)
MaterialABS
Environmental
Operating temperature-25 ºC to +55 ºC
(-13 ºF to +131 ºF)
Storage and transport
temperature
-40 ºC to +70 ºC
(-40 ºF to +158 ºF)
2000 Hz124124
4000 Hz6565
8000 Hz3535
Acoustical performance specified per octave * (all
measurements are done with a pink noise signal; the
values are in dBSPL).
Parts included
QuantityComponent
1LP1-UC10E-1 Sound Projector
Technical specifications
Electrical*
Maximum power15 W
Rated power10 / 5 / 2.5 W
Sound pressure level
at 10 W / 1 W (1kHz, 1 m)
Sound pressure level
at 10 W /1 W (1kHz, 4 m)
Opening angle
at 1 kHz / 4 kHz (-6 dB)
96 dB / 86 dB (SPL)
88 dB / 78 dB (SPL)
220° / 65°
Relative humidity<95%
CE-label
Note:
• The specification data is measured in an anechoic
chamber, free field
• The reference axis is perpendicular to the center
point of the front grille
• The reference plane is perpendicular to the center of
the reference axis
• The horizontal plane is perpendicular to the center of
the reference plane