Bosch LP1-UC10E User Manual

Page 1
Communication Systems | LP1-UC10E Uni-Directional Sound Projector
LP1-UC10E Uni-Directional Sound Projector
Superb speech and music reproduction
Ease of installation
Modern unobtrusive styling
Integrated connection cable
Suitable for loop-through cabling
Ceiling and/or wall mounting
Tough, impact-resistant enclosure
Water and dust protected to IP 65
BS 5839 part 8 compliant
The LP1-UC10E is a powerful 10 W sound projector intended for high quality speech and music reproduction in indoor and outdoor applications. The state-of-the-art design is matched to both modern and traditional style environments. The sound projector is suitable for use in voice alarm systems.

Functions

advanced filtering, has resulted in a very natural sound reproduction with excellent bass response.
Voice alarm loudspeaker Voice alarm loudspeakers are specifically designed for
use in buildings where performance of systems for verbal communication announcements is governed by regulations. The LP1-UC10E is designed for use in voice alarm systems and is compliant with British Standard BS 5839 part 8. The sound projector is pre-wired for use with an optional line/loudspeaker supervision board external mounted. The loudspeaker has built-in protection to secure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected. In this way, system integrity is maintained, ensuring loudspeakers in other areas can
still be used to inform people of the situation. The loudspeaker has a ceramic terminal block, thermal fuse and heat resistant, high-temperature wiring. The sound projector is made from high-impact self­extinguishing ABS acc. to class UL 94 V 0, finished in off­white.

Certifications and Approvals

Quality assurance All Bosch loudspeakers are designed to withstand
operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test to demonstrate that they can withstand two times their rated power for short durations. This ensures extra reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and much less chance of failure or performance deterioration.
Safety aspects In common with all Bosch products, care is taken to
meet high safety standards. All ABS parts are self­extinguishing (according to UL 94 V 0) This sound projector complies with the relevant safety and installation regulations of EN 60065 and BS 5839 part 8.
www.boschsecurity.com
Page 2
2 | LP1-UC10E Uni-Directional Sound Projector
Water-and Dust Protected acc. to IEC 60529 IP 65

Installation/Configuration Notes

Mounting Ease of installation is realized in the way of mounting:
first the mounting plate is fixed to the wall or ceiling, secondly a safety cord is attached to the mounting plate, allowing the installer temporarily hang the loudspeaker during installation. After making the connections, the sound projector can be fixed to the mounting plate and the horizontal direction can be fixed. A cover plate covers screws and electrical wiring. The versatile mounting bracket allows the sound projector to be horizontal and vertical directed. The cover plate is provided with 2 cable – or 16 mm conduit entries (covered as standard supplied) in opposite position, suitable for loop- through cabling.
Power setting A ceramic terminal for electrical connection is provided.
The loudspeaker is standard connected to full power. Half-power or quarter power can be selected by connecting the appropriate color coded wire to the terminal block.
Circuit diagram
Frequency response
Dimensions in mm
Polar diagram (measured in pink noise)

Parts Included

Quantity Component 1 LP1-UC10E Uni-Directional Sound Projector
Page 3

Technical Specifications

Electrical*
Maximum Power 15 W Rated Power 10 W (10-5-2.5 W) Sound Pressure Level at
96 dB / 86 dB (SPL)
10 W / 1 W (at 1 kHz, 1m) Effective Frequency Range
75 Hz to 20 kHz
(-10 dB) Opening Angle
220° / 65°
(at 1 kHz / 4 kHz, -6 dB) Rated Input Voltage 100 V Rated Impedance 1000 ohm
Mechanical
Connection 3 way screw terminal block Material ABS Dimensions
(dia. x L)
185 x 300 mm
(7.3 x 11.8 inch) Color White (RAL 9010) Weight 3 kg (6.6 lb)
Environmental
LP1-UC10E Uni-Directional Sound Projector | 3
Ambient Temperature -25°C to +55°C
*) Technical performance data acc. to IEC 60268-5

Ordering Information

Model | Description LP1-UC10E Uni-Directional Sound Projector
10 W, white ABS
Americas: Bosch Security Systems 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 585 223 4060 Fax: +1 800 289 0096 security.sales@us.bosch.com www.boschsecurity.us
© Bosch Security Systems, 2005 | Data subject to change without notice | 12. Dec. 2005
Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: +31 (0) 40 27 83955 Fax: +31 (0) 40 27 86668 emea.securitysystems@bosch.com www.boschsecurity.com
Asia-Pacific: Bosch Security Systems Pte Ltd 38C Jalan Pemimpin Singapore 577180 Phone: +65 6319 3450 Fax: +65 6319 3499 apr.securitysystems@bosch.com www.boschsecurity.com
Represented by
Loading...