Bosch Appliances ISW-EN4216R User Manual

Download

Intrusion Systems | Commercial Wireless ISW‑EN4216R LCD Receiver

Commercial Wireless ISW‑EN4216R LCD Receiver

Monitors up to 16 transmitters or repeaters

▶

Text display (LCD)

▶

Cost-effective solution for small systems

▶

Flexible alarm and fault output

▶

Wireless registration

▶

Compatible with a variety of transmitters and control

▶

panels

Secure wireless implementation

▶

Exclusive wireless protocol ensures maximum

▶

performance and reliability

The ISW‑EN4216R LCD Receiver integrates up to sixteen 900 MHz wireless transmitters into any application. The Commercial Wireless platform uses diversity reception and advanced signal processing to reduce dead spots in transmission areas. The liquid crystal display (LCD) allows the user to view the current status of all transmitters and view the history of events. Each receiver stores up to 50 events. The receiver provides versatile options for adding high performance wireless to an installation.

System Overview

The Commercial Wireless platform, powered by Inovonics wireless mesh network technology, ensures superior range, reliability, and scalability for commercial applications. Using a wide range of transmitters and repeaters, this proven technology provides flexibility and performance to meet the most stringent requirements. This exclusive protocol is available only on Commercial Wireless products.

Wireless 900 MHz Band

The Commercial Wireless platform sends redundant information on several multi-frequency channels within the FCC Part 15 900 MHz band, providing superior range and reliability. In comparison, systems that use a single frequency technology can only send information on one narrow band channel. Any interference within the band can cause missed signals. With wireless registration, it is easy to add this technology to any application.

Functions

Flexible Outputs

Transmitters and repeater faults and alarms map to any of the receiver models.

Wireless Registration

There is no external programmer required. The transmitter is enrolled using a wireless programming routine built into the receiver. Wireless registration reduces installation time.

Secure Wireless Implementation

Jam detection monitors all channels for the presence of interference for more than 20 sec. A reset terminal is inside the receiver, allowing the receiver to accept external reset signals. The receiver includes a case tamper and internal antennas for added security.

www.boschsecurity.com

2 | Commercial Wireless ISW‑EN4216R LCD Receiver

Status Indication

The LCD shows the current condition of each transmitter. The LCD also provides a history of past events including activation, tamper, low battery, and inactivity.

Supervision and Expansion

Transmitter supervisory check-in and a transmitter specific supervisory window, defined in the receiver, support sites with both removable pendants and fixed-position transmitters. The technology also supervises repeaters.

Enroll, supervise, and map up to sixteen wireless transmitters and repeaters using the appropriate outputs. Configure transmitters and repeaters individually to best suit the application.

Certifications and Approvals

Region Certification

USA UL AMCX: Central Station Alarm Units (ANSI/

UL 1610,ANSI/UL 1635), ANET: Holdup Alarm Units (UL 636), APAW: Police Station-connected Alarm Units (ANSI/UL 365, ANSI/UL 464), APOU: Proprietary Alarm Units (ANSI/UL 1076), NBSX: Household Burglar Alarm System Units (ANSI/UL 1023), NBSX7: Household Burglar Alarm System Units Certified for Canada (ULC/ORD-C1023)

Inovonics Wireless Corporation holds the following approvals:

FCC Conforms to FCC Part 15 regulations

ISW‑EN1223S Water-resistant Pendant Transmitter (Single‑but-

ton)

ISW‑EN1223SK Survey Pendant Transmitter

ISW‑EN1233D Necklace Pendant Transmitter (Double‑button)

ISW‑EN1233S Necklace Pendant Transmitter (Single‑button)

ISW‑EN1235D Beltclip Pendant Transmitter (Double‑button)

ISW‑EN1235S Beltclip Pendant Transmitter (Single‑button)

ISW‑EN1235DF Fixed-location Transmitter (Double‑button)

ISW‑EN1235SF Fixed-location Transmitter (Double‑button)

ISW‑EN1242 Smoke Detector-Transmitter

ISW‑EN1247 Glass-break Sensor Transmitter

ISW-EN1249 Billtrap Transmitter

ISW‑EN1260 PIR Motion Sensor‑Transmitter (Commercial and

High‑end Domestic Applications)

ISW‑EN1261HT PIR Motion Sensor‑Transmitter (High‑traffic Areas)

ISW‑EN1262 PIR Motion Sensor‑Transmitter (Residential and

Low‑traffic Commercial Applications)

ISW‑EN1265 PIR Motion Sensor‑Transmitter (Ceiling‑mount Ap-

plications)

Parts Included

Quant. Component

1 ISW‑EN4216R Receiver

1 Hardware pack

1 Literature – Installation and Operation Manual

Technical Specifications

Installation/Configuration Notes

Compatibility Information

The ISW‑EN4216R LCD Receiver is compatible with the following products:

Repeater

ISW‑EN5040‑T High‑power Repeater

Transmitters

ISW‑EN1210 Universal Transmitter (Single‑input)

ISW‑EN1210EOL Universal Transmitter with EOL Resistor

ISW-EN1210SK Survey Transmitter

ISW‑EN1210W Door-Window Transmitter with Reed Switch

ISW‑EN1215EOL Universal Transmitter with Wall Tamper and EOL Re-

sistor

ISW‑EN1215WEOL Door‑Window Transmitter with Wall Tamper, Reed

Switch, and EOL Resistor

ISW‑EN1223D Water-resistant Pendant Transmitter (Double‑but-

ton)

Electrical

Power Requirements: 10 VDC to 14 VDC

Environmental

Relative Humidity: Up to 90%, non‑condensing

Temperature (operating ): 0°C to +60°C (+32°F to +140°F)

Mechanical

Material: ABS

Closure: Latching with optional screws for high secur-

ity installations

Dimensions: 16.5 cm x 8.9 cm x 2.5 cm

(6.5 in. x 3.5 in. x 1 in.)

Weight: 204 g (7.2 oz)

Outputs

Rating: 1 A, 28 VDC, or 0.5 A, 30 VAC (resistive)

Types:

Reception Characteristics

Frequency Compatibility: 902 MHz to 928 MHz

Transmitters: Supports up to 16

Trademarks

Trademark names are used throughout this document. In most cases, these designations are claimed as trademarks or registered trademarks in one or more countries by their respective owners. Rather than placing a trademark symbol in every occurrence of a trademark name, Bosch Security Systems, Inc. uses the names only in an editorial fashion and to the benefit of the trademark owner with no intention of infringing the trademark.

Six on‑board Form C relays for con-

•

necting to any control panel or for stand-alone wireless applications (NO or NC) One NO Receiver case tamper contact

•

closure One NC Receiver jam input indication

•

Commercial Wireless ISW‑EN4216R LCD Receiver | 3

Inovonics is a trademark of Inovonics Wireless Corporation.

Ordering Information

Commercial Wireless ISW‑EN4216R LCD Receiver

Monitors up to sixteen wireless transmitters or repeaters

ISW-EN4216R

www.boschsecurity.com

4 | Commercial Wireless ISW‑EN4216R LCD Receiver

Americas:

Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us

Europe, Middle East, Africa:

Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6258 5511 Fax: +65 6571 2698 apr.securitysystems@bosch.com www.boschsecurity.com

Represented by