Bosch ISW-D8125CW-V2 Specsheet
Intrusion Alarm Systems | ISW-D8125CW-V2 Inovonics Echostream Interface Module
ISW-D8125CW-V2 Inovonics Echostream
Interface Module
www.boschsecurity.com
u Bosch Security Systems, Inc. control panel
compatibility
The ISW‑D8125CW‑V2 Inovonics EchoStream Interface
Module is an interface module and keypad that
connects Inovonics EchoStream receivers, repeaters,
and wireless transmitters to compatible Bosch
Security Systems, Inc. control panels. Use the
ISW‑D8125CW‑V2 in systems spanning large distances
to avoid inconvenient hard-wire installations. Place
radio frequency (RF) transmitters anywhere within the
maximum range. Move the RF transmitters as needed
without costly re-wiring.
System overview
Bosch Security Systems, Inc. control panels connect to
hard-wired points and to wireless RF points at the
same time. To add RF points, connect a Inovonics
EchoStream EN4200 Serial Receiver to the
ISW‑D8125CW‑V2 Inovonics EchoStream Interface
Module. Connect the ISW‑D8125CW‑V2 to the control
panel's Zonex 1 or Zonex 2 terminals and to
Aux Power.
A compatible control panel supports up to two
ISW‑D8125CW‑V2 wireless interface connections.
Connect the first ISW‑D8125CW-V2 to Zonex 1, and
u Up to two ISW‑D8125CW‑V2 connections for each
control panel; one per Zonex Bus
u User-friendly menus and backlit display
u Liquid crystal display (LCD) shows two lines by
16 characters
u Internal keypad
the second to Zonex 2. Each ISW‑D8125CW‑V2
Inovonics EchoStream Interface Module supports up
to 117 supervised RF points.
Functions
Internal Keypad
Use the keypad to access the programming and
diagnostics functions of the wireless portion of the
system. The distinctive keypad design helps you
distinguish the difference between the
ISW‑D8125CW‑V2 Inovonics EchoStream Interface
Module and a system keypad.
Programming
You can program time intervals for supervising system
and individual transmitters.
Powered by Inovonics
The Inovonics EchoStream platform, powered by
Inovonics wireless mesh network technology, ensures
superior range, reliability, and scalability for
commercial applications. Using a wide range of
transmitters and repeaters, this proven technology
provides flexibility and performance to meet the most
stringent requirements. This exclusive protocol is
available only on Inovonics EchoStream products.
2 | ISW-D8125CW-V2 Inovonics Echostream Interface Module
Installation/configuration notes
Compatibility Information
Control Panels
G Series All versions of the D9412GV3 and D9412GV2,
v6.30 or higher of the D9412G
All versions of the D7412GV3 and D7412GV2;
v6.30 or higher of the D7412G
All versions of the D7212GV3 and D7212GV2;
v6.41 or higher of the D7212G
Receivers
EN4200 Serial Receiver
Repeater
EN5040‑T High‑power Repeater
Transmitters
All Inovonics EchoStream transmitters
Mounting and Wiring
Place the ISW‑D8125CW‑V2 Inovonics EchoStream
Interface Module within 1.5 m (5 ft) of the control
panel and wire using between 1.2 mm (18 AWG) and
0.8 mm (22 AWG) solid wire.
Place the EN4200 Serial Receiver up to 30.5 m (100 ft)
from the ISW‑ D8125CW‑V2 Inovonics EchoStream
Interface Module. For best transmitter reception
results, place the EN4200 Serial Receiver in a central
location among the transmitters. If transmitters are
too far away for the receiver to pick up the
transmission, install a Inovonics EchoStream RF
repeater (EN5040‑T).
Power Requirements
Current Draw: 20 mA typical, 50 mA maximum;
+60 mA for each receiver
Voltage (Operating): 10.2 VDC to 14 VDC supplied by the
control panel auxiliary power or an
external auxiliary power supply.
Ordering information
ISW-D8125CW-V2 Inovonics Echostream Interface Module
Provides LCD and internal keypad that connects
Inovonics EchoStream receivers, repeaters, and
wireless transmitters to compatible Bosch Security
Systems, Inc. control panels
Order number ISW-D8125CW-V2
Parts included
Quant. Component
1 ISW‑D8125CW‑V2
1 Literature – Installation Guide
Technical specifications
Properties
Dimensions: 4.0 in. x 6.5 in. x 1.2 in.
Weight: 0.6 lb
Environmental Considerations
Relative Humidity: Up to 93%, non-condensing
Temperature (Operating): 0°C to +65°C (+32°F to +149°F)
Loading...