Bosch FMR-1000-RA Specsheet

Fire Alarm Systems | FMR‑1000‑RA Remote Annunciator

FMR‑1000‑RA Remote Annunciator

www.boschsecurity.com

u LED status indicators

u 80‑character LCD display

u Piezo sounder

The FMR‑1000‑RA Remote Annunciator is a
four‑conductor LCD annunciator without system
control capability. It shows the equivalent LEDs and
LCD display. It includes a piezo sounder, navigation
buttons, and acknowledge key. The navigation
functions and the acknowledge key are accessible
without restriction.
The Remote Annunciator features tabs with different
language versions for LED and key text. The housing
includes a built-in level and allows for surface and
semi‑flush mounting.

Functions

Display

The Remote Annunciator uses an 80‑character (4 lines
X 20 characters) wide viewing-angle LCD display. The
display includes a long‑life LED backlight. The
backlight is controlled by the panel, or locally turned
on upon any key press and turned off after a 30 sec
timeout without key press. Even when AC power is
lost, the LED backlight is still turned on if a user is
operating the keypad.
System Normal: When no alarms or troubles exist in
the system, the Power LED lights steadily, and no
other LEDs are lit. The LCD display shows two banner
lines, the system status line, and the date and time.

u Navigation buttons

u Acknowledge key

System Off‑normal: If any off‑normal condition exists,
the panel displays the number of off‑normal conditions
classified in groups. Groups include fire alarm, gas
alarm, supervisory, and trouble. The panel holds up to
255 events for each group at a time. Any restored
event is deleted from the list.

Piezo Sounder

The Remote Annunciator has a piezo sounder that
provides audible indication of the system status. In
case of multiple activation, the system status with
highest priority is indicated.

Certifications and approvals

Region Certification

USA UL FSYE: Emergency Alarm System Acces-

sories (ANSI/UL 2017), UOXX: Control
Unit Accessories, System (ANSI/UL 864,
9th edition)

CSFM see our website

FDNY-

#6101

CoA

2 | FMR‑1000‑RA Remote Annunciator

Installation/configuration notes

Mounting Considerations

The Remote Annunciator can be surface mounted in
the supplied back box or flush mounted using a 3‑gang
electrical box.

Notice

The annunciator should be mounted no higher
than shoulder height of the shortest person
operating the system.

Wiring Considerations

Use four conductor, 18 AWG (ISO 0.75 mm2) or larger
wire to connect the Remote Annunciator to the Option
Bus of the FACP. The total length of wire connected to
the Option Bus terminals must not exceed 4000 ft
(1219 m), regardless of the wire gauge used. For
detailed wire length calculations, see the FPA‑1000

Installation and Operation Guide.

Parts included

Quant. Component

1 Remote annunciator in back box with cover frame

Tabs with different language versions for LED and key text

1 Hardware pack

1 Literature – Installation and Operation Guide

Technical specifications

Electrical

Voltage (operating): 12 VDC or 24 VDC nominal

Current consumption at 12 VDC

Alarm: 150 mA maximum (with annunciator lit and

piezo sounder on)

Stand-by: 25 mA maximum (only Power LED on)

Mechanical

Operating and Display Elements

LCD: 4‑line x 20‑character display, backlit

LEDs: Six: Fire Alarm (red); Gas Alarm (blue);

Power (green); Supervisory, Silenced,
and Trouble (3 x yellow)

Keys: Acknowledge key, 4 navigation keys

Sounder: Built-in piezo sounder

Housing

Material: ABS-FR

Color: Red

Dimensions (W x H x D)

• Back box: 7.40 in x 4.41 in x 1.89 in. (188 mm x
112 mm x 48 mm)

Cover frame: 7.40 in x 4.41 in x 2.40 in. (188 mm x

112 mm x 61 mm)

Weight: 15.2 oz (430 g)

Wiring

Cable Entries: 3 knockouts for ½ in. diameter conduit

connectors on back, bottom and top side

Connections: 4 terminals

Wre Gauge: 12 AWG to 18 AWG (ISO 0.75 mm2 to

4 mm2)

Wire Type: Non-shielded, four conductor wire

Ordering information

FMR‑1000‑RA Remote Annunciator

LCD annunciator without system control capability for
use with the FPA‑1000 Analog Addressable Fire Panels

Order number FMR-1000-RA

Current consumption at 24 VDC

Alarm: 120 mA maximum (with annunciator lit and

Stand-by: 30 mA maximum (only Power LED on)

piezo sounder on)

Environmental

Environment: Indoor, dry

Environment Friendly: RoHS compliant

Protection Class: IP 30 (per IEC 605029)

Relative Humidity: Up to 95%, non‑condensing

Temperature (operating): +32°F to +120°F (0°C to +49°C)

Temperature (storage): -4°F to +140°F (-20°C to +60°C)