Communications Systems | LBB 1992/00 Plena Voice Alarm Router
LBB 1992/00 Plena Voice Alarm Router
Six-zone router with single or dual channel operationSix EMG input contacts
Six business input contacts
Six volume override output contacts
Supervision within the Plena Voice Alarm SystemEN 54 16 and EN 60849 compliant
The Plena Voice Alarm Router is an expansion unit that can add six zones as well as 12 input and eight output contacts to the Voice Alarm System. It can use the built-in amplifier on the LBB 1990/00 Voice Alarm Controller, and provides inputs and outputs for one or two amplifiers in a multi-amplifier one or two-channel system.
It provides dual channel operation for calls and BGM simultaneously to a maximum of six different zones, using two Plena amplifiers. Additionally, single channel operation is possible with only one Plena amplifier.
Multiple routers can also share one amplifier, including the internal amplifier on the controller unit. It is possible to use any number of amplifiers from one up to the number of routers used. The controller supports A/B wiring.
The LBB 1992/00 has a set of relays for zone-switching the power amplifier output(s) to different loudspeaker groups. Each zone can be switched between:
•The call channel (call-station selection, all-call microphone, or emergency activation)
•The BGM channel (front panel selection)
•Off
Volume override relay contacts are provided for each zone separately for overriding local loudspeaker volume controls. This ensures that priority messages go through with a given volume, even though the local volume controls may be set to a low volume level for background music, for example. Both three-wire and four-wire override schemes are supported. A call or a triggered input will activate these contacts for the appropriate zones, together with an additional voltage-free contact (callactive) for control purposes.
An overload protected 24 VDC output provides power for driving external relays, making an external power supply unnecessary. The master output channel, or one of the input channels, can be selected to be monitored with headphone connector and LED meter.
Controls and indicators Front
•Meter (LED's for -20, -6, 0 dB and Power ON)
•Eight system fault LEDs
•12 loudspeaker line fault LEDs
•Six EMG call-zone selection buttons
•12 EMG call-zone status LEDs
•Six BMG zone selector buttons
•Six BMG zone status LEDs
Back
•2 x DIP switch
•Unit ID rotary control
•Mains voltage selector
www.boschsecurity.com
2 | LBB 1992/00 Plena Voice Alarm Router
•Power switch
•Mains socket
Interconnections
Back
•12 loudspeaker outputs
•Two external amp inputs
•Call output
•Six volume override outputs
•12 trigger inputs
•RS-232 connector
•Two system interlinks
•Two external amp outputs (XLR/balanced)
•Power amp fault output
•24 VDC power output
•24 VDC power input
•Two extra trigger outputs
•Earth connection screw
Region |
Certification |
|
Europe |
CE |
TUV certificate IEC60849 |
|
|
Declaration of Conformity |
|
|
|
Poland |
CNBOP |
|
Safety |
|
acc. to EN 60065 |
Immunity |
|
acc. to EN 55103-2 |
Emission |
|
acc. to EN 55103-1 |
Emergency |
|
acc. to EN 54 16 / EN 60849 |
LBB 1992/00 rear view
Quantity Component
1LBB 1992/00 Plena Voice Alarm Router
1Power cord
1Set of 19” mounting brackets
1Plena CD
1Installation and User Instructions
1XLR cable
1Ethernet cable
Electrical
Mains power supply
Voltage |
230/115 VAC, ±10%, 50/60 Hz |
Inrush current |
1.5 A @ 230 VAC / 3 A @ 115 VAC |
Max power consumption |
50 VA |
Idle / max load* current |
0.2 A / 0.3 A |
Battery power supply |
|
Voltage |
24 VDC, +15% / -15% |
Current max |
1.8 A |
Typical / max load* current |
0.51 A / 1.5 A |
Trigger Inputs |
12 x (6 EMG, 6 business) |
Connectors |
MC1,5 / 14-ST-3,5 |
Activation |
Programmable |
Supervision |
On EMG inputs, programmable |
Supervision method |
Series / parallel resistor |
100 V input |
|
Connector |
MSTB 2,5 /16-ST |
Amp 1 |
100 V / 70 V / 0 V |
Amp 2 |
100 V / 0 V |
Power handling capacity |
1000 W |
Loudspeaker outputs |
12 x (2 x 6 zones) |
Connectors |
MSTB 2,5 /16-ST, floating |
100 V output |
700 W rated per zone |
Volume override types |
3-wire, 4-wire (24 V), 4-wire failsafe |
Output Contacts |
|
Connector |
MC 1,5/14-ST-3,5 |
Rating |
250 V, 7A, voltage free |
General purpose relays (2x) |
NO / COM |
* Maximum load means maximum load on 24 VDC, and indicator test.