Bosch DS484Q, DS486Q Specsheet

Intrusion Alarm Systems | DS484Q and DS486Q Quad‑Beam Photoelectric Detectors

DS484Q and DS486Q Quad‑Beam
Photoelectric Detectors

www.boschsecurity.com

u Quad beams

u Easy alignment (sounder, LEDs, and voltage

readings)

The DS484Q and DS486Q Detectors have separate
transmitters and receivers. The transmitter sends an
invisible infrared beam to the receiver. If the beam is
broken, the receiver signals an alarm. Multiple channel
operation provides increased system flexibility.

Functions

Environmental Discrimination Circuitry

Monitors gradual loss of signal due to dust, fog, rain,
snow, and so on. Normally-closed output opens when
signal loss reaches 90%. Can be field configured to
bypass alarm relay when activated.

Test Features

The transmitters have three features for use in
alignment and testing.

• Voltage output (requires a voltmeter)

• Sounder for alignment

• LEDs (alignment)

u Two coverage ranges

u Four mounting options with optional mounting poles

u Environmental discrimination circuit

Multiple Channel Operation

Configure the detectors for up to eight different
channels. This allows multiple units to be used near
one another without the possibility of receiver cross­talk. This is particularly useful when stacking multiple
beam sets.

And-Or Mode Selection

You can configure the detectors to cause an alarm
when all four beams are blocked, or when either the
upper two beams or lower two beams are blocked.
This configuration detects smaller objects and
eliminates the possibility of someone crawling through
the beam.

Certifications and approvals

Region Certification

Europe CE 2004/108/EC EMC Directive;

EN61000-6-3:2007+A1:2011;
EN50130-4:2011

USA UL ANSR: Intrusion Detection Units

(UL639)

2 | DS484Q and DS486Q Quad‑Beam Photoelectric Detectors

Installation/configuration notes

Mounting Considerations

Mount these detectors on solid vibration free surfaces
or poles.

Technical specifications

Photobeam

Selectable Beams: Two groups by four channels

Maximum Outdoor
Coverage
DS484Q:

Maximum Outdoor
Coverage
DS486Q:

Response Time: Selectable response time of 35 ms to 700 ms

Beam Interrupt
Time:

120 m (400 ft)

200 m (660 ft)

Adjustable from 50 ms to 500 ms

Enclosure Design

Material: Polycarbonate

Dimensions: 398 mm x 103 mm x 99 mm

Receiver Weight: 1.2 kg (2.64 lb)

Transmitter
Weight:

(15.67 in. x 4.06 in. x 3.90 in.)

1.2 kg (2.64 lb)

Tamper Output: Normally-closed contacts rated at 0.1 A at

Alarm Output: Form C 0.2 A at 30 VDC, output period: 3 sec

EDC Output: Normally-closed 0.2 A at 30 VDC, output period:

Tamper Output: Normally-closed 0.1 A at 30 VDC, output period:

Environmental
Discrimination
Circuit Output:

30 VDC

3 sec

while cover is removed

Normally-closed contacts rated at 0.2 A at 30
VDC

Ordering information

DS484Q Photoelectric Detector

Provides an outdoor range of 120 m (400 ft), indoor
range 240 m (800 ft).

Order number DS484Q

DS486Q Photoelectric Detector

Provides an outdoor range of 200 m (660 ft), indoor
range 400 m (1320 ft).

Order number DS486Q

Accessories

MP1 Metal Pole, 1 m (3 ft)

Straight metal poles measuring 1 m (3 ft) for pole
mounting photoelectric detectors. Shipped in
packages of two.

Order number MP1

Environmental Considerations

Operating
Temperature:

IP Rating: IP 54 (protection against dust; protection against

-25° C to + 55° C (-13°F to + 130° F)

splashing water)

Mounting Considerations

Location: Surface or pole mount

Pattern
Pointability:

±90° horizontal, ±10° vertical

Power Requirements

Voltage: 10.5 VDC to 28 VDC non-polarized

Receiver Current
Draw:

DS484Q
Transmitter
Current Draw:

DS486Q
Transmitter
Current Draw:

Backup Power
Requirements:

80 mA standby, 50 mA alarm

35 mA

55 mA

4 hours (120 mAh) minimum required for UL
Certificated Installations

MP2 Metal Pole, 1.2 m (4 ft)

Straight metal poles measuring 1.2 m (4 ft) for pole
mounting photoelectric detectors. Shipped in
packages of two.

Order number MP2

MP3 L‑Curved Metal Pole

Curved metal poles for mounting to vertical surfaces
for pole mounting photoelectric detectors. Shipped in
packages of two.

Order number MP3

PC1A Weather Enclosure

Protects detectors when mounted outside. The
enclosure’s dimensions are 39.4 cm x 10.3 cm x 6 cm
(15.5 in. x 4 in. x 2.4 in.). Shipped in packages of two.

Order number PC1A

PC3A Back‑to‑back Box

Allows back-to-back mounting of detectors on a pole.
Shipped individually.

Order number PC3A

PEH‑2 Heater

Reduces the effects of frost, intense fog, cold, and
damp conditions on photoelectric beam detectors.
Shipped in packages of two (one for transmitter and
one for receiver).

Order number PEH2

3 | DS484Q and DS486Q Quad‑Beam Photoelectric Detectors

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2014 | Data subject to change without notice
2641774603 | en, V3, 20. Aug 2014