Page 1
Security System User’s Guide
Before using this manual, you should be familiar with the
User’s Cards
located inside the keypad. The User’s Cards
provide instructions for frequently used functions.
This guide contains instructions for system owners to change
other user’s passcodes. It also describes basic features of the
security system.
Maintenance and Service
The keypad requires very little maintenance, however, test the
system weekly to insure early detection of a need for service.
A test schedule and maintenance program can be arranged
with your alarm company. If you notice a change in operation
during normal use or testing, call for service as soon as
possible. Do not attempt to repair the control panel, keypads,
or detectors yourself.
Call ________________________________ Before Testing
The security system is connected to this telephone number:
_______________________________________________________
The security control panel is connected to the phone jack
located:______________________________________________
Power Failure
If your keypad indicates a power failure, and you have power
in the rest of your premises, there may be a problem with the
electrical transformer or circuit breaker supplying power to
your security control panel. First, check to be sure that the
transformer is securely plugged into the electrical outlet. If it
appears to be damaged in any way, do not attempt to repair it.
Call your security company for service.
Transformer location: _____________________________
If the transformer is plugged in, check the circuit breaker
supplying power to the outlet. If the breaker is tripped, check
the appliances on the circuit for signs of electrical problems.
Make sure someone has not intentionally turned the breaker
off. When all is clear, reset the breaker.
Circuit breaker number: ___________________________
71-07117-000-C 1/95