Bosch AVSM-R, AVSM-W Specsheet
Fire Alarm Systems | AVS Series Synchronization Control Modules
AVS Series Synchronization Control
Modules
Synchronize horn and strobe with only two wires
▶
Option to silence horns while strobes continue to flash
▶
Operates in one Class A circuit or in two Class B
▶
circuits
Circuits rated for 3 A of continuous current; 5 A surge
▶
or inrush current
Green LED indicates signal operation
▶
Easy to install
▶
The Gentex AVSM (12 V or 24 V) and AVS44 (24 V) control
modules provide an easy way to synchronize multiple horns
and strobe light flashes using only two wires. With the
module in temporal (Code 3) mode, it synchronizes multiple
horn signals and allows the horns to be silenced while the
strobes continue to flash.
Certifications and Approvals
Note Gentex Corporation holds the Listings and
Approvals.
Region Certification
USA UL UUKC: Signaling Appliances and
Equipment for the Hearing Impaired
(UL1971), UVAV: Visual Signal Appliances
for Fire Protective Signaling Systems
(UL1638)
CSFM AVS44 modules only: 7300-0569: 121,
7300-1615: 202
AVSM modules only: 7125-0569: 123,
7125-0569: 129
NYC/MEA AVS44 models: (285‑91‑E, Vol. 12)
AVSM models: (285‑91‑E, Vol. 18)
CBFP City of Chicago Bureau of Fire Protection
ADA Complies with Americans with Disabilities
Act (ADA 4.28.3)
Installation/Configuration Notes
Compatibility Information
These modules are compatible with Gentex Notification
Appliances as indicated:
NAC Series AVS44 Series AVSM Series
GC Series
GE3‑12 Series
GE3-24 Series
GEC Series
GES Series
GEH12 Series
GEH24 Series
GX91 Series
GX93 Series
HS24 Series •
SSPK Series
2
1
1
1
1
1
1
1
1
1
•
•
•
•
•
•
•
•
•
www.boschsecurity.com
2 | AVS Series Synchronization Control Modules
NAC Series AVS44 Series AVSM Series
ST24 Series •
WGE Series
1
Although the AVS44 modules can be used with these
1
•
devices, the AVSM modules are recommended in loops
where no HS24 or ST24 devices are used.
2
The GX91 Series Mini-horns can only be synchronized
through the control panel. They cannot be used in any loop
using an AVS Synchronization Control Module.
Wiring Considerations
Connect AVS modules before all other signaling devices on
the loop which are intended to be synchronized.
Note Do not use these modules in coded or pulsed
signaling circuits.
The input terminals accept wires with diameters between
18 AWG (1.2 mm) and 12 AWG (2.3 mm). Do not loop the
wire under the terminals. Break the wire run to provide
supervision of the connection.
Parts Included
Quant. Component
1 Synchronization control module in back box
1 Cover plate
1 Hardware pack
1 Literature pack
Technical Specifications
Power Requirements
Regulated Voltage (operating):
either: 24 VDC or FWR
AVSM only: 12 VDC or FWR
Current (operating) for AVS44 or AVSM at 24 V
VDC: 45 mA maximum
FWR: 47 mA maximum
Current (operating) for AVSM at 12 V
VDC: 31 mA maximum
FWR: 34 mA maximum
Ordering Information
AVS‑44 Synchronization Control Module
(red)
Synchronization Control Module primarily for
use with the Gentex HS24 Series and ST24
Series notification appliances.
AVS44‑W Synchronization Control Module
(white)
Synchronization Control Module primarily for
use with the Gentex HS24 Series and ST24
Series notification appliances.
AVSM‑R Synchronization Control Module
(red)
Synchronization module for use with all Gentex
synchronizable notification appliances except
the HS24 Series and the ST24 Series.
AVSM‑W Synchronization Control Module
(white)
Synchronization module for use with all Gentex
synchronizable notification appliances except
the HS24 Series and the ST24 Series.
AVS-44
AVS44-W
AVSM-R
AVSM-W
Environmental Considerations
Relative Humidity: Up to 93%, non‑condensing
Temperature (operating): +32°F to +120°F (0°C to +49°C)
Mechanical Properties
Dimensions (H x W x D)
Back Box: 5.6 in. X 4.6 in. X 2.4 in. (14.2 cm x 11.7 cm x 6.1 cm)
Module: 3.9 in. X 3.8 in. x 1.3 in. (9.9 cm x 9.7 cm x 3.3 cm)
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T2995920395 | Cur: en-US, V4, 4 Jul 2010
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
apr.securitysystems@bosch.com
www.boschsecurity.com
Represented by
Loading...