Bosch VEZ-400, AUTODOME 4000 mini Operation Manual
AUTDOME 4000 Mini PTZ
Dome
VEZ-400 Series
en Operations Manual
Table of contents
1
Safety 5
1.1 Safety precautions 5
1.2 Important safety instructions 6
1.3 Important notices 8
1.4 FCC & ICES compliance 12
1.5 Bosch notices 15
2
Description 17
2.1 Features 17
3
Unpacking 19
3.1 Parts List 19
3.2 Additional Tools Required 21
3.3 Accessories 21
4
Installation Overview 24
5
Installing a Surface Mount 25
6
Connection 29
6.1 RS-485 Connections 31
6.2 Video Connection 33
6.3 Alarm Connections 33
6.4 Power Connections 35
6.5 Camera Settings 35
6.5.1 Setting the address (ID) of the camera 37
6.5.2 Setting the protocol of the camera 37
7
On-Screen Display (OSD) Menu 39
7.1 Basic Navigation and Common Actions 39
7.2 Main Menu 42
7.2.1 Editing Titles 43
7.2.2 Clearing Saved Functions 44
7.3 System Setup Menu 45
7.3.1 System Information 45
7.3.2 Reboot 46
7.3.3 Initialize 47
7.3.4 Password 48
7.4 Display Setup 49
AUTDOME 4000 Mini
PTZ Dome
Table of Contents | en 3
Bosch Security Systems, Inc. 2013.4 | |
7.4.1 OSD Setup 49
7.4.2 Privacy Zone 51
7.4.3 Image Setup 52
7.4.4 Motion/Face Detection 53
7.4.5 Language 54
7.5 Camera Setup 55
7.5.1 Focus/Zoom 55
7.5.2 WB Setup 56
7.5.3 AE Setup 58
7.5.4 D/N Setup 59
7.5.5 Advanced 60
7.5.6 WDR/DNR 61
7.6 Dome Motion Setup 63
7.6.1 General Setup 63
7.6.2 Motion Setup 64
7.6.3 Home Action 66
7.6.4 Calibration 67
7.7 Preset Setup 68
7.8 Pattern Setup 70
7.9 Tour Setup 71
7.10 Scan Setup 72
7.11 Alarm Setup 74
8
Troubleshooting 77
9
Technical Specifications 80
10
Dimensions 83
11
Bosch Protocol 84
12
Pelco Protocol 87
4 en | Table of Contents
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Safety
Before installing and operating the camera, please read this
manual carefully.
Safety precautions
Danger!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
!
Warning!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
!
Caution!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
Notice!
This symbol indicates information or a company policy that
relates directly or indirectly to the safety of personnel or
protection of property.
1
1.1
AUTDOME 4000 Mini
PTZ Dome
Safety | en 5
Bosch Security Systems, Inc. 2013.4 | |
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow these instructions.
5. Do not install near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
6. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
7. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
8. Only use attachments/accessories specified by the
manufacturer.
9. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer. When a cart is used, use
caution when moving the cart/apparatus combination to
1.2
6 en | Safety
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when l
unused for long periods of time. This will prevent damage
to the unit from lightning and power line surges.
11. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in a way,
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
AUTDOME 4000 Mini
PTZ Dome
Safety | en 7
Bosch Security Systems, Inc. 2013.4 | |
Important notices
!
Caution!
A regulated 24 VAC, 43W power supply is recommended for use
with this camera for the best picture and the most stable
operation. An unregulated power supply can cause damage to
the camera. When unregulated power supply is applied,
product warranty will be void.
Bosch recommends using the camera with a monitor that has a
CCTV-quality 75 Ohm video impedance level. If your monitor is
switched to high impedance, please adjust accordingly.
Do not attempt to disassemble the camera to gain access to the
internal components. Refer servicing to your dealer or to
qualified service personnel.
Never face the camera towards the sun or any bright or
reflective light. This may cause smear on the picture and
possible damage to the CCD.
Do not remove the serial sticker for the warranty service.
All-pole power switch - Incorporate an all-pole power switch,
with a contact separation of at least 3 mm in each pole, into the
electrical installation of the building. If it is needed to open the
housing for servicing and/or other activities, use this all-pole
switch as the main disconnect device for switching off the
voltage to the unit.
Camera grounding - For mounting the camera in potentially
damp environments, ensure to ground the system using the
ground connection of the power supply connector (see section:
Connecting external power supply).
Camera lens - An assembled camera lens in the outdoor housing
must comply and be tested in accordance with UL/IEC60065.
Any output or signal lines from the camera must be SELV or
1.3
8 en | Safety
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Limited Power Source. For safety reasons, the environmental
specification of the camera lens assembly must be within the
environmental specification of -10 °C (14 °F) to 50 °C (122 °F).
Camera signal - Protect the cable with a primary protector if the
camera signal is beyond 140 feet, in accordance with NEC800
(CEC Section 60).
Coax grounding:
– Ground the cable system if connecting an outside cable
system to the unit.
– Connect outdoor equipment to the unit's inputs only after
this unit has had its grounding plug connected to a
grounded outlet or its ground terminal is properly
connected to a ground source.
– Disconnect the unit's input connectors from outdoor
equipment before disconnecting the grounding plug or
grounding terminal.
– Follow proper safety precautions such as grounding for any
outdoor device connected to this unit.
U.S.A. models only - Section 810 of the National Electrical Code,
ANSI/NFPA No.70 provides information regarding proper
grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors,
location of discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
AUTDOME 4000 Mini
PTZ Dome
Safety | en 9
Bosch Security Systems, Inc. 2013.4 | |
Disposal - Your Bosch product was developed and
manufactured with high-quality material and
components that can be recycled and reused. This
symbol means that electronic and electrical
appliances, which have reached the end of their
working life, must be collected and disposed of
separately from household waste material. Separate
collecting systems are usually in place for disused
electronic and electrical products. Please dispose of
these units at an environmentally compatible
recycling facility, per European Directive 2002/96/EC.
Electronic Surveillance - This device is intended for use in
public areas only. U.S. federal law strictly prohibits surreptitious
recording of oral communications.
Environmental statement - Bosch has a strong commitment
towards the environment. This unit has been designed to
respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET
handling precautions to avoid electrostatic discharge. NOTE:
Wear required grounded wrist straps and observe proper ESD
safety precautions when handling the electrostatic-sensitive
printed circuit boards.
Fuse rating - For protection of the device, the branch circuit
protection must be secured with a maximum fuse rating of 16A.
This must be in accordance with NEC800 (CEC Section 60).
Moving - Disconnect the power before moving the unit. Move
the unit with care. Excessive force or shock may damage the
unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially
regarding clearance from power and lightning conductors and
transient protection, must be in accordance with NEC725 and
NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readilyaccessible disconnect device in the building installation wiring.
10
en | Safety
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Pluggable equipment - Install the socket outlet near the
equipment so that it is easily accessible.
Power resupply - If the unit is forced to power down due to
exceeding the specified operating temperatures, disconnect the
power cord, wait for at least 30 seconds, and then reconnect
the power cord.
Power lines: Do not locate the camera near overhead power
lines, power circuits, or electrical lights, nor where it may
contact such power lines, circuits, or lights.
Rack mount
– Ventilation - Do not place this unit in a built-in installation
or rack without proper ventilation or adhering to the
manufacturer’s instructions. The equipment must not
exceed its maximum operating temperature requirements.
– Mechanical loading - Properly mount the equipment in a
rack to prevent a hazardous condition due to uneven
mechanical loading.
SELV - All the input/output ports are Safety Extra Low Voltage
(SELV) circuits. SELV circuits should only be connected to other
SELV circuits.
Because the ISDN circuits are treated like telephone-network
voltage, avoid connecting the SELV circuit to the Telephone
Network Voltage (TNV) circuits.
The system ground is only used to comply with safety standards
or installation practices in certain countries. Bosch does not
recommend connecting system ground to safety ground unless
it is explicitly required. However, if the system ground and
safety ground are connected and grounding loops are causing
interference in the video signal, use an isolation transformer
(available separately from Bosch).
!
Caution!
Connecting System ground to Safety ground may result in
ground loops that can disrupt the CCTV system.
AUTDOME 4000 Mini
PTZ Dome
Safety | en 11
Bosch Security Systems, Inc. 2013.4 | |
Video loss - Video loss is inherent to digital video recording;
therefore, Bosch Security Systems cannot be held liable for any
damage that results from missing video information. To minimize
the risk of lost digital information, Bosch Security Systems
recommends multiple, redundant recording systems, and a
procedure to back up all analog and digital information.
FCC & ICES compliance
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following conditions:
– this device may not cause harmful interference, and
– this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules and ICES-003 of Industry Canada. These limits are designed
to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and radiates radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. In a
domestic environment, this product may cause radio
interference, in which case the user may be required to take
adequate measures. If this equipment does cause harmful
interference to radio or television reception, which may be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
1.4
12 en | Safety
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the
dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office, Washington,
DC 20402, Stock No. 004-000-00345-4.
Informations FCC et ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Ce produit est conforme aux normes FCC partie 15. la mise en
service est soumises aux deux conditions suivantes :
– cet appareil ne peut pas provoquer d'interférence nuisible
et
– cet appareil doit pouvoir tolérer toutes les interférences
auxquelles il est soumit, y compris les interférences qui
pourraient influer sur son bon fonctionnement.
Suite à différents tests, cet appareil s’est révélé conforme aux
exigences imposées aux appareils numériques de Classe A en
vertu de la section 15 du règlement de la Commission fédérale des
communications des États-Unis (FCC), et en vertu de la norme
ICES-003 d’Industrie Canada. Ces cexigences visent à fournir
une protection raisonnable contre les interférences nuisibles
quand l'appareil est utilisé dans un environment commercial.
Cet appareil génère, utilise et émet de l'energie de fréquence
radio, et peut, en cas d'installation ou d'utilisation non conforme
aux instructions, engendrer des interférences nuisibles aux
radiocommunications. Toutefois, rien ne garantit l'absence
AUTDOME 4000 Mini
PTZ Dome
Safety | en 13
Bosch Security Systems, Inc. 2013.4 | |
d'interférences dans une installation particulière. L’utilisation de
ce produit dans une zone résidentielle peut provoquer des
interférences nuisibles. Le cas échéant, l’utilisateur devra
remédier à ces interférences à ses propres frais. Il est possible
de déterminer la production d'interférences en mettant
l'appareil successivement hors et sous tension, tout en
contrôlant la réception radio ou télévision. L'utilisateur peut
parvenir à éliminer les interférences éventuelles en prenant une
ou plusieurs des mesures suivantes:
– Modifier l'orientation ou l'emplacement de l'antenne
réceptrice;
– Éloigner l'appareil du récepteur;
– Brancher l'appareil sur une prise située sur un circuit
différent de celui du récepteur;
– Consulter le revendeur ou un technicien qualifié en radio/
télévision pour obtenir de l'aide.
Toute modification apportée au produit, non expressément
approuvée par la partie responsable de l'appareil, est
strictement interdite. Une telle modification est susceptible
d'entraîner la révocation du droit d'utilisation de l'appareil.
Au besoin, l’utilisateur consultera son revendeur ou un
technicien qualifié en radio/télévision, qui procédera à une
opération corrective.
La brochure suivante, publiée par la Commission fédérale des
communications (FCC), peut s’avérer utile : How to Identify and
Resolve Radio-TV Interference Problems (Comment identifier et
résoudre les problèmes d’interférences de radio et de
télévision). Cette brochure est disponible auprès du U.S.
Government Printing Office, Washington, DC 20402, États-Unis,
sous la référence n° 004-000-00345-4.
14
en | Safety
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Bosch notices
Danger!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
!
Caution!
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL’s Standard(s) for Safety for Audio,
Video and Similar Electronic Apparatus - Safety Requirements
(UL 60065). UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY- OR
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document
are likely to be registered trademarks and must be treated
accordingly.
1.5
AUTDOME 4000 Mini
PTZ Dome
Safety | en 15
Bosch Security Systems, Inc. 2013.4 | |
Note:
This manual has been compiled with great care and the
information it contains has been verified thoroughly. The text
was complete and correct at the time of printing. The ongoing
development of products means that the content can change
without notice. Bosch Security Systems accepts no liability for
damage resulting directly or indirectly from faults,
incompleteness or discrepancies between this manual and the
product described.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
16 en | Safety
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Description
This manual is a reference for programming and operating
AUTDOME 4000 camera. It contains information about features,
commands, and operation methods.
The AUTDOME 4000 is an autofocus, high-resolution, integrated
day/night camera that is part of a larger building block for any
surveillance/security system. By using multiple keyboard
controllers and multiple dome cameras, no place is too large for
monitoring. Extensible andflexible architecture facilitates
remote control functions for a variety of external switching
devices, such as DVRs.
Features
– 260X Zoom (26X Effective Optical Zoom, 10X Digital)
– Wide Dynamic Range (WDR)
– Day & Night (Auto/BW/Color)
– Pan 360° Endless Rotation
– Tilt 180° Vector scan (90° when 3D Privacy Masking is
enabled)
– 99/210 Preset Positions (except Short-cut command)
– 2/8 Auto scans
– 2/8 Patterns
– 2/8 Tours (consisting of Presets, Patterns, and Scans)
– 4 Alarm inputs, 1 Alarm output (Off/N.C./N.O.)
– Programmable PTZ Speed: Proportional to Zoom ratio,
changeable preset speed
– OSD with multiple display languages
– Privacy mask zones
2
2.1
AUTDOME 4000 Mini
PTZ Dome
Description | en 17
Bosch Security Systems, Inc. 2013.4 | |
Notice!
The AUTDOME 4000 Mini PTZ Dome uses a 30X zoom lens
(fW=3.49 ±0.17mm fT=104.02 ±5.20mm). The polycarbonate
bubble (part of the camera housing) causes image distortion,
reducing the optical zoom performance. The effective optical
zoom ratio is 26X +/- 10%.
18 en | Description
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Unpacking
This equipment should be unpacked and handled with care. If an
item appears to have been damaged in shipment, notify the
shipper immediately.
The original packing carton is the safest container in which to
transport the unit and must be used to return the unit for
service. Save it for possible future use.
Verify that all the parts listed in the Parts List are included. If
any items are missing, notify your Bosch Security Systems Sales
or Customer Service Representative.
Parts List
Qty Description
1 AUTODOME 4000 Mini PTZ Dome
camera
1 Drilling Template
4 6 x 30 mm plastic anchors
4 #8 x 32 screws and attached O-rings
4 M4 x 12 Torx screws and attached O-
rings
3
3.1
AUTDOME 4000 Mini
PTZ Dome
Unpacking | en 19
Bosch Security Systems, Inc. 2013.4 | |
Qty Description
1 T20 Security Torx wrench
1 User Manual (this booklet)
!
Warning!
Make sure that appropriate mounting screws, rubber O-rings,
and anchors are used for the surface to which the camera is
mounted. The supplied plastic anchors and mounting screws
are only suitable for mounting the camera on a concrete ceiling.
20 en | Unpacking
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Additional Tools Required
– No. 2 Phillips screwdriver
– Drill with appropriate bit for pre-drilling anchor holes
– Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
Accessories
The following accessories are available for the camera:
3.2
3.3
AUTDOME 4000 Mini
PTZ Dome
Unpacking | en 21
Bosch Security Systems, Inc. 2013.4 | |
Model
Number
Description Drawing
VEZ-A4-IC AUTDOME 4000 In-
ceiling Mount
(Charcoal color and
white color ceiling
plate included)
VEZ-A4-PC AUTDOME 4000
Pipe mount
(Charcoal color)
VEZ-A4-PW
AUTDOME 4000
Pipe mount
(White color)
22 en | Unpacking
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Model
Number
Description Drawing
VEZ-A4-WC AUTDOME 4000
Wall mount
(Charcoal color)
VEZ-A4-WW
AUTDOME 4000
Wall mount
(White color)
AUTDOME 4000 Mini
PTZ Dome
Unpacking | en 23
Bosch Security Systems, Inc. 2013.4 | |
Installation Overview
The AUTDOME 4000 camera comes with the hardware and
installation instructions necessary to mount the camera to a
concrete ceiling.
This following mounting accessories are available (and are
supplied with separate mounting instructions):
– Wall mount, used in applications where the camera is
mounted to a vertical wall.
– Pipe mount, used in applications where the camera is
mounted to a horizontal (high) ceiling.
– In-ceiling mount, used in applications where the camera is
mounted into a recessed ceiling.
The installation should be made by qualified installation
personnel and conform to the National Electrical Code and
applicable local codes.
4
24 en | Installation Overview
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Installing a Surface Mount
Use the following illustration as a guide for installing the camera
directly onto the ceiling (surface mount):
Figure 5.1: Mounting diagram
Numbe
r
Description
1 Drilling template
2 6 x 30 mm plastic anchor
5
AUTDOME 4000 Mini
PTZ Dome
Installing a Surface Mount | en 25
Bosch Security Systems, Inc. 2013.4 | |
NumberDescription
3 Camera base
4 O-ring
5 #8 x 32 screw
6 Safety strap (will hold item #7 dome cover for
easy installation)
7 Dome cover
8 M4 x 12 Torx screw
!
Caution!
To prevent humidity problems, the camera must be installed in
dry conditions, and the cable leads should be sealed after they
are connected.
1. Determine a secure location that can support the weight of
the dome.
2. Use the template (refer to , page 25, item 1) to mark the
locations of the four screw holes and the cable conduit.
3. Pre-drill the four screw holes wide enough to accept the
plastic anchors.
4. Cut out the entire cable conduit hole.
5. Insert the four plastic anchors (item 2) inside the pre-
drilled holes.
6. Route the cables from the camera through the conduit in
the ceiling.
7. Remove the dome cover (item 6) from the camera base
(item 3).
26 en | Installing a Surface Mount
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Notice!
To prevent scratches on the dome cover, Do Not Remove the
plastic film protecting the dome cover until after hardware
installation is complete.
8. Remove the white foam ring from the camera base, and
remove the white foam sheet from the inside of the dome
cover. (These are for protection during transport.)
9. Align the four screw holes on the camera base (item 3) with
the four plastic anchors.
!
Caution!
When (re)mounting the camera base, make sure that each
mounting screw has a rubber O-ring. This ensures protection
against water ingress.
10. Attach the camera base to the ceiling using the four #8 x 32
screws (with O-rings attached) (item 4). Tighten the screws
enough to ensure that the camera base is secured to the
ceiling.
11. Make the necessary Dip Switch settings (described in
chapter 4.3). Note: This step can also be done later, but
then the dome cover must be re-opened.
!
Caution!
When (re)mounting the dome cover to the camera base, make
sure that each screw has a rubber O-ring, and that the large
rubber O-ring is in place on the camera base. This ensures
protection against water ingress.
12. Align the screw holes on the dome cover (item 6) with the
camera base.
13. Attach the dome cover to the camera base using the four
M4 x 12 Torx screws (with O-rings (item 4) attached) using
the supplied Torx wrench. Make sure that the large rubber
O-ring between the camera base and dome cover is in place
AUTDOME 4000 Mini
PTZ Dome
Installing a Surface Mount | en 27
Bosch Security Systems, Inc. 2013.4 | |
Loading...