Engineered Solutions | Access Professional Edition 3.3
Access Professional Edition 3.3
www.boschsecurity.com
u Software for access control and security
management utilizing the innovative Access Modular
Controller family
u Cardholder administration of up to 10,000 records
in the database
System overview
Access PE provides self contained access control for
small and medium-sized companies. Its installation is
extremely simple and fast. There is no need to install
and administer a database system. The system is easy
to use and enables a person with minimal training to
create badges and administer access rights in a very
short time. Specific event logging and reporting allows
you to trace who was when and where on your
company’s grounds.
You can choose your readers and cards from the same
bundle of devices, which are supported by Bosch’s
medium to large scale BIS/ACE Access Engine
systems, thereby safeguarding your investment for
future extensions. Card personalization is included in
Access PE, providing you with the means to design
your badges, to perform image acquisition with USBcameras and to use most commercially available Card
Printers.
In addition to given standardized door models it is
possible to use extended I/O functionality to exert
influence on diverse conditions while monitoring
inputs or setting outputs.
u Graphical location map with device control via both
maps and device tree
u Alarm management with details via alarm list and
animated GIFs on interactive location maps
u Video verification, video alarm verification, and
video monitoring of live and recorded events
The Access PE offers a map viewer, which provides a
graphical representation of the premises with device
control directly from the map. (e.g., doors opened or
cameras activated) Alarm events are queued in a list
and are easily located with the support of navigation
maps and animated icons.
The Access PE can be extended with two modules. A
Video System on the one side and an Offline Locking
System [selected markets, only] on the other side.
The Offline Locking System (OLS) is integrated into
the Access PE – so a person can use the same card for
both systems.
Through integrated video functionality and using the
wide range of Bosch IP devices an operator for
example can do a video verification by comparing live
streams with the database image of the person
requesting for access.
Access PE runs on a standard PC with a Windows
operating system:
• Windows 2008 Server
• Windows 7
• Windows 10 x64 Pro
This can be a single workstation computer or a clientserver system with a central server and remote
workstations.
| Access Professional Edition 3.3
2
Functions
Pos. Description
1 Server with Access PE Software
2 Workstations
3 Printer
4 AMC2 – access controller
5 Reader
6 Door strikes
Access Control
The Access PE system, along with AMC access
controllers, offers the following features:
• A wide range of pre-defined and self-explaining door
models allow fast and easy hardware configuration
through one-click selection of the door type, such as
standard door, turnstile, elevator, with entrance / exit
reader, and so on.
• Real-time activation of reader and cardholder
configurations in the access controllers.
• Time zone support for AMC - allows installations
across different time zones.
• Time schedules for time-based access permission
defined per weekday including the definition of extra
days, holidays, etc..
• Time schedules for automatic activation/deactivation
of cardholder settings, such as access rules, pin
codes and so on.
• Time schedules for automatic activation/deactivation
of system settings, such as setting door status to
permanent open from 9 a.m. to 5 p.m.
• Online swipe – verification via database image
automatically provided through access request.
• Three PIN code types can be used for persons:
– Verification PIN with alarm code feature
– Identification PIN – substitudes a card
– IDS-PIN to arm special areas
• Choose between the following access modes
– Card only
– PIN only
– PIN or card
• Temporary activation/blocking of cardholders, either
manually or time controlled.
• Definable input fields for cardholder information.
• Anti-Passback
• Card personalization for importing cardholder images
and creating your individual corporate badge designs
printable on standard card printers.
• Up to three cards can be assigned to a person.
• Creation of an acknowledgment of receipt together
with the print of the picture and the badge design.
• Creation of logical areas, which could be single
rooms, groups of rooms, whole floors or parking lots,
where access control points could be assigned to.
• Full archival and restoral of system data.
• Using the Bosch controller family AMC digital and
monitored I/Os for additional control and monitoring
functions or easy intrusion features.
• Supported languages:
– English
– French
– German
– Dutch
– Polish
– Simplified Chinese
– Russian
– Spanish
– Portuguese (Brazil)
• Detailed event log for recording access events.
• Integrated filter- and reporting features.
• Export into standard CSV-format for further
processing.
• Comprehensive online help
Alarm management
The Access PE alarm list shows all incoming alarms to
the operator. Alarms can be accepted by the operator.
In case of an alarm, the location map will be displayed.
The icon of the device that triggered the alarm is
highlighted by animation.