Bosch AN bullet 4000 IR, VTI-4075-V921, VTI-4075-V911 User Manual
AN bullet 4000 IR
960H Day/Night IR Bullet Camera
Bosch Security Systems User Manual 2012.11
2 en | Table of Contents 960H Day/Night IR Bullet Camera
Table of Contents
1 Cautions
2 Important safety instruction
3 Features
4 Components
5 Camera parts
6 Installation
6.1 Mounting position
6.2 Monitor connection
6.3 Camera adjustment
7 OSD menu structure
8 Specication
8.1 Dimensions
Bosch Security Systems User Manual 2012.11
960H Day/Night IR Bullet Camera Cautions | en 3
1 Cautions
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired operation.
Note!
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.”
WARNING
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
CAUTION!
Any changes or modications in construction of this devies which are
not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
CAUTION!
1. A regulated DC12V 1A power supply is recommended for use with this
camera for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be
out of subject.
2. It is recommended that the camera is used with a monitor that has a
CCTV quality 75 video impedance level. If your monitor is switched to high
impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the
internal components. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light,
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
6. Do not expose the camera to rain or other types of liquid.
7. The apparatus must be connected to a mains socket-outlet with a
protective earthing connection.
Bosch Security Systems User Manual 2012.11
4 en | Cautions 960H Day/Night IR Bullet Camera
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
This product should not be mixed with other commercial wastes
purchased this product, or their local government ofce, for details of
where and how they can take item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK). NO USER. SERVICING
TO QUALIFED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufcient mangnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
CAUTION!
These servicing instructions are for use by qualied service personnel
only. To reduce the risk of electric shock do not perform any servicing
other than that contained in the operating instructions unless you are
qualied to do so.
Use Class 2 Power Supply Only
Bosch Security Systems User Manual 2012.11
960H Day/Night IR Bullet Camera Important safety instructions | en 5
2 Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not t into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Bosch Security Systems User Manual 2012.11
6 en | Features/Component 960H Day/Night IR Bullet Camera
3
Features
The camera has the following features:
•
•
•
•
•
•
•
•
•
•
•
•
Ultra high resolution, 960H (1/3") Sensor.
9-22mm lens with True Day/Night lter for optimum performance in
various lighting conditions.
720 TV Lines Horizontal Sensor Resolution.
Integrated IR LED's for discrete surveillance in dark environments.
Multi language On Screen Display (OSD) with joystick control.
2DNR.
4 Privacy Zones.
Motion Detection.
ATR(Adaptive Tone-curve Reproduction / Digital WDR)
Cable managed bracket for secure and clean installation.
Vandal resistant. (IK08)
Outdoor rated. (IP66)
4 Components
Qty Description
1
VTI-4075-V9x1(C)
camera with integrated
mounting bracket
1
Video Output
Test Cable
3
Screws
(PH/1(SUS) 5x30)
1
Wrench
(M6 hex)
1 Guide Pattern
1
User Manual
(this booklet)
Bosch Security Systems User Manual 2012.11
960H Day/Night IR Bullet Camera Camera parts | en 7
5 Camera parts
1
2
3
4
5
6
7
8
Sunshield Fixing Bolt
Sunshield
Mounting Bracket
Housing Body
Housing Front
Photo cell
Lens
High-Power LED
➊
➍➎➏ ➐➑
➋ ➌
FAR
WIDE
TELE
NEAR
OSD joystick
Service cable connector
Rubber seal
Bosch Security Systems User Manual 2012.11
8 en | Installation 960H Day/Night IR Bullet Camera
6 Installation
6.1 Mounting position
To prevent injury, this apparatus must be securely attached to
the oor/wall in accordance with the installation instructions.
NOTICE!
The image sensors in modern cameras are highly sensitive and require special
care for proper performance and extended lifetime. Follow the guidelines for
optimum results with your camera:
– Do not expose to direct sunlight or bright spotlights in operating and
nonoperating conditions.
– Avoid bright lights in the eld of view of the camera. Bright lights cause
a “smearing” effect, which is visible as white lines above and below the
highlight. Prolonged exposure to bright lights may cause bleaching of the
sensor's color lters. This will be visible as colored spots in the picture
and is irreversible.
WARNING!
The mounting surface, mounting screws/plugs, and junction box must be
stable and capable of supporting a maximum load of 4 kg (8.82 pounds).
Mounting to an improper surface or using improper mounting material can
cause camera malfunction and is a potential safety hazard.
WARNING!
Make sure that appropriate mounting screws and anchors are used for the
surface to which the camera is mounted. The supplied universal mounting
screws can be used with most plastic anchors, please conrm compatibility
before mounting the camera.
CAUTION!
To prevent humidity problems, the camera must be installed in dry conditions,
and the cable leads should be sealed after they are connected.
* 1st Axis
360°
90°
* 2nd Axis
* 3rd Axis
360°
Bosch Security Systems User Manual 2012.11
960H Day/Night IR Bullet Camera Installation | en 9
6 Installation
6.2 Monitor connection
6.3 Camera adjustment
CAUTION!
To prevent humidity problems, the camera must be installed in dry conditions.
The housing front should never be removed in wet or moist conditions. Doing
so could cause condensation on the inside of the camera window.
1.
2.
3.
4.
5.
6.
7.
Remove the housing front.
Connect service monitor. (optional)
Adjust zoom and focus.
Fasten the zoom and focus lever.
Adjust OSD settings. (refer to OSD section)
Disconnect service monitor cable. (optional)
Re-mount housing front. Include warning to (1) check rubber seal is in place. And (2) tighten
housing front rmly to ensure protection against water ingress.
DUAL(DC12V/AC24V)
Regulated Power Supply
DUAL
(DC12V/AC24V)
Terminal block
Terminal block connector
Female
BNC connector
*Sold separately
Video In
TV Monitor
Screw
Terminal
"+","-" Indication
2.6x3.2
(0.1x0.12)
10.16
(0.4)
5.08(0.2)
15.4(0.6)
18.2(0.71)
Camera
mm
(in.)
Ground contact
Signal contact
Housing front fastened enough.
(No gap between housing front and housing body)
Protection against water ingress ensured.
Housing front not fastened enough.
(Gap between housing front and housing body)
Risk of water ingress.
V X
Bosch Security Systems User Manual 2012.11
10 en | OSD menu structure 960H Day/Night IR Bullet Camera
7 OSD menu structure
MAIN MENU 1st Sub 2nd Sub 3rd Sub 4th Sub
LENS
MANUAL
AUTO
TYPE DC
MODE
AUTO, OPEN,
CLOSE
SPEED (000 ~ 255)
RETURN
SHUTTER /
AGC
AUTO
HIGH LUMINANCE
MODE
SHUT, AUTO IRIS
SHUT+AUTO IRIS,
BRIGHTNESS (000 ~ 255)
LOW LUMINANCE
MODE AGC,OFF
BRIGHTNESS
x0.25, x0.50, x0.75,
x1.00
RETURN
MANUAL
MODE SHUT+AGC
SHUTTER
1/50(PAL),1/120(PAL)
1/60(NTSC),1/100(NTSC)
1/250,1/500,1/1000,1/2000
1/4000,1/10000
AGC 6, 12, 18, 24, 30, 36, 42, 44.8
RETURN
* SHUT+IRIS: Both the Shutter and the Mechanical Iris are automatically
adjusted according to brightness.
* Auto Iirs(Default): The Shutter stays at the manually selected value
and only the Mechanical Iris adjusts brightness.
MAIN MENU 1st Sub 2nd Sub 3rd Sub 4th Sub
WHITE BAL
ATW
SPEED (000 ~ 255)
DELAY CNT (000 ~ 255)
ATW FRAME x0.50,x1.00,x1.50,x2.00
ENVIRONMENT INDOOR,OUTDOOR
RETURN
PUSH
USER1
B-GAIN (000 ~ 255)
R-GAIN (000 ~ 255)
RETURN
USER2
B-GAIN (000 ~ 255)
R-GAIN (000 ~ 255)
RETURN
ANTI CR
MANUAL
LEVEL
NTSC:(30 ~ 115)
PAL:(28 ~ 134)
RETURN
PUSH LOCK
BACK LIGHT OFF,BLC,HLC
Loading...