Bontrager TRIP 2 Owner's Manual

ENGLISH

Trip™ 2, 2L, 3 and 5W

Owner’s Manual.

Thank you for buying a Bontrager Trip™

computer. We hope this computer gives

you miles (or kilometers) of pleasure.

Your Trip computer may not include all of the features discussed in this manual. This
manual covers Trip 2, 2L, 3 and 5W models.

Please read this manual carefully. If you do not understand the information, or you
have a question that this manual does not cover, consult your Authorized Bontrager
Dealer or visit www.bontrager.com.

WELCOME.

Safety When Riding

When riding your bicycle, do not stare at the computer for a long time (Figure 1).
Failure to pay attention to the road ahead of you, obstacles, and trafc could result
in a loss of control, serious injury, or death. Stay alert!

Make sure wires cannot contact the tire, rim, or spokes. Contact with wires could
damage the computer or cause you to lose control and fall.

Terms Used

Hold

Press a button continuously for about two
seconds.

Push a button once, briey.

Set all values in the memory to 0 (zero) and erase
all settings.

Set Trip values (only) in the memory to 0 (zero).

Press several times to scroll through a list of values
or display elements.

Press

Reset

Trip Restart

Scroll

Figure 1. Do Not Stare at Computer for Long Periods of Time.

Display Elements and Abbreviations

The Trip can be used on two bicycles with different wheel sizes while still
calculating data correctly for each wheel size. You must rst set the wheel sizes
and choose the appropriate bike setting before riding.

Figure 2. Display Elements and Buttons.

Trip Data (can be reset to 0 without
affecting Odometer (ODO) total)

• Trip Distance (TRP)

• Average Speed (AVG) and Maximum Speed (MAX)

• Ride Time (TME)

Abbreviation

AVG

CLK

CUR

MAX

ODO

TME

TRP

CAD

Abbreviations and Screen Terms

Meaning

Average Speed

Clock

Current Speed

Maximum Speed

Odometer

Ride Time

Trip Distance

Cadence

SPEED

∙Current

TIME

∙Clock (CLK)
∙Ride Time (TME)

DISTANCE

∙Trip (TRP)
∙Odometer (ODO)

WHEEL SELECTION

∙Wheel 1 or Wheel 2

PACER

TEMPERATURE

CADENCE (CAD

)

∙Trip 3 ONLY

BACKLIGHT

∙Trip 5W ONLY

SPEED

∙Average (AVG)

∙Maximum (MAX)

To Program Your Trip

This procedure programs your Trip cycle computer for the rst time or after a

Reset. If you would like to program individual features or advanced settings, see

the sections Additional Information & Features and Advanced Settings.

Install the battery (or push the Reset button—see Figure 12 at end of
manual).

The wheel size appears on the display.

To change the wheel size, press

.

To select, press

.

To scroll between units of measurement, Miles per Hour (MPH) or
Kilometers per Hour (KMH), press

.

To select, press

.

To change to ˚F or ˚C, press

.

1.

2.

3.

4. 5. 6.

1. 2. 3.

4.

5.

6.

Easy Setup

After you install the battery, you can program the wheel size and units.

Install the Battery

To prolong the life of the battery, it is not installed at the factory. (See Figures 10
and 11 at the end of the manual for further help installing the battery.)

To select, press .

The Trip returns to CLK.

7.

Scroll to CLK.

Hold

for 2 seconds.

To change to 12hr or 24hr clock, press

.

1.

2.

3.

7. 8.

4. 5. 6.

To select, press .

To change the ashing digit for hours, press

.

To select, press

.

4.

5.

6.

To Set the Clock

7.

(for 2 seconds)

To change the ashing digit for minutes, press .

To select, press

.

The Trip returns to CLK.

7.

8.

7. 8.