Blaupunkt Verona-RCR-127 Owners Manual

Radio / Cassette
Augsburg RCR 87 Essen RCR 127 Verona RCR 127
Operating instructions
1
2
3
4
5 6
2
Verona
Augsburg Essen
RCR 127
RCR 87 RCR 127
12 9
11
78
Contents
Quick reference ............................ 21
Important notes ............................ 24
Precautions........................................... 24
Traffic safety ......................................... 24
Installation............................................. 24
Accessories .......................................... 24
Second KeyCard................................... 24
KeyCard theft protection system 25
Putting the unit into operation .............. 25
Removing the KeyCard ........................ 25
“Training” a second KeyCard/
Replacing a KeyCard............................ 25
Displaying the radio pass data ............. 25
Short Additional Memory (S.A.M.)........ 26
Turn On Message (T.O.M.) .................. 26
Optical indication of anti-theft
protection .............................................. 26
Care of your KeyCard........................... 26
Selecting the audio source ......... 26
Radio operation with RDS ........... 27
AF - Alternative frequency.................... 27
REG - regional programme .................. 27
Selecting a waveband
(only Verona RCR 127) ........................
Station tuning........................................ 28
Automatic tuning
Manual tuning with << >>.................. 28
/ ....................... 28
27
Scrolling through the broadcasting
networks................................................ 28
Changing the memory bank ................. 28
Storing stations..................................... 28
Automatically storing the strongest
stations with Travelstore....................... 29
Recalling stored stations ...................... 29
Scanning stored stations with
Preset Scan .......................................... 29
Selecting the seek tuning sensitivity .... 29
Switching from stereo to mono............. 29
Loudness .............................................. 30
Receiving traffic programme
stations with RDS-EON................ 30
Traffic announcement priority on/off .... 3 0
Beep tone ............................................. 30
Switching off the beep tone............... 31
Automatic seek tuning start
(tape operation) .................................... 31
Adjusting the volume for traffic
announcements and the beep tone...... 31
Cassette operation....................... 32
Inserting a tape..................................... 32
Ejecting a tape...................................... 32
Fast winding.......................................... 32
Reversing the tape ............................... 32
Listening to the radio during fast tape
winding with RM (Radio Monitor) ......... 32
Care notes ............................................ 33
DSC programming ....................... 33
Overview of DSC factory settings ........ 35
Appendix....................................... 35
Specifications........................................ 35
Blaupunkt telephone hotline ................. 36
20
Quick reference
1 On Off
Volume
When switching the set on with the knob, the KeyCard has to be inserted. The unit will play with the pre­adjusted volume.
Switching on/off with the KeyCard:
The set has to be turned on with the knob.
Notice: Read the information in chapter “Key­Card theft protection system”.
Switching on/off via the ignition:
When connected correspondingly, the set can also be turned on and off with the vehicle ignition. After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.
Switching on with the ignition being switched off:
To keep on operating the set when the ignition is switched off (KeyCard is in­serted), proceed as follows: Turn the knob to switch the unit off, wait for about 2 seconds and turn it on again. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.
2 SCA / SRC
SCA – Preset Scan
Press SCA for about 1 second ­The stations stored on the preset but­tons will be scanned. The indicators for the waveband, mem­ory bank and preset button will flash in the display.
To stop Preset Scan: Press SCA again for about 1 second.
SRC (Source) Press SRC briefly – You can switch between radio and cassette mode, if a cassette is insert­ed.
3 TS / FM
(Augsburg RCR 87, Essen
RCR 127)
Selector key to access the memory banks I, II and T.
TS / BND
Selector switch to access the FM memory banks I, II and T. The wavebands MW and LW can also be selected, if “AM ON” is activated in the DSC menu.
Toggling the memory banks:
Press button. The selected memory bank/waveband will appear in the display.
Travelstore
To store and recall the five most pow­erful stations with Travelstore. To store: Press button for approxi­mately 1 sec. until you hear a beep and “T-STORE” appears in the display. To recall: Select the memory bank “T” and press the corresponding preset button (1-5) briefly.
4 Cassette ejection
Press
(Verona RCR 127)
.
ENGLISH
21
5 Cassette loading slot
Insert the tape with side A or 1 facing up, the open side showing to the right.
6 Reversing the tape /
Fast winding
Reversing the tape/fast winding
Press both buttons at a time. TR1 or TR2 will be displayed.
Fast winding
FR : fast rewind, press FF to stop FF : fast forward, press FR to stop
7 AF / TA
AF – Alternative frequency in RDS
mode: When “AF” is displayed, the radio’s RDS module is searching for a fre­quency offering the same programme in a better quality. AF on/off: press button for about 1 second.
TA (Traffic Announcement = priority for traffic stations) If “TA” is displayed, the radio will play traffic stations only. Priority on/off: press button briefly.
8 1, 2, 3, 4, 5 - preset buttons
You can store five stations for each of the memory banks I, II and T. To store a station: Press a preset button during radio operation and hold down until the set resumes play (beep). To recall a station: Select the desired memory bank and press the relevant preset button briefly.
Verona RCR 127:
You can also store 5 stations for the AM and LW waveband.
9 KeyCard theft protection system
To operate the set it is necessary that the KeyCard is inserted.
KeyCard
Inserting the KeyCard
With the KeyCard tongue sticking out of the unit, introduce the KeyCard into the slot with the contact area show- ing up. To remove the card, press first to un­lock.
Read also the information in chapter “KeyCard theft protection system”.
Flashing KeyCard tongue
When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection. For more information see chapter “DSC programming”. This flashlight can be switched off by pushing in the tongue and lock. “WRONG KC” will briefly appear on the display and the set will switch off automatically.
22
: Display
a
c
e
d
b
a) NDR1 NDS - Station name b) TR 1 - Track (side) 1 of the cas-
c) FM - Waveband d) I, II, T - Memory bank I, II or
e) 5 - Preset button (1-5) f) AF - Alternative frequency for
g) TP - A traffic station is being
h) TA - Priority for traffic stations i) LD - Loudness on
i h
g
f
sette
Travelstore
RDS operation
received
; Rocker switch
Radio operation
/ Station search
Up Down
<</>> Up/Down in short intervals
(on FM only if AF is off)
On FM only: <</>> To scroll through the station net-
works when AF is on, e.g.NDR 1, 2,
3, 4, N-JOY, FFN, ANTENNE ... .
Extra rocker switch functions:
Further setting functions with
AUD < DSC Mode <
Condition: The corresponding function is activated.
< AUD
To adjust the treble, bass, balance and fader. If the display shows “TRE” or “BAS”, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If “BAL” or “FAD” is dis­played, you can set the balance (left/ right) and fader (front/rear). Briefly press AUD as many times as required and make the setting using the rocker switch.
Treble + / Fader front Treble – / Fader rear
Bass – / Balance left Bass + / Balance right
The last setting will be stored automat­ically. To switch off AUD: Press button briefly again. If the setting remains unchanged with­in 8 seconds, the display will switch back to the previous condition.
ENGLISH
23
Loading...
+ 14 hidden pages