Blaupunkt SBW500 User manual

5.1 CH SOUNDBAR
SBW500
SBW500
Product description
The p roduct is a 5.1 channel home theater s ystem with high performance / high power / acoustic eld location accuracy. Model Name: Blaupunkt SBW500 (SKU-TV LS 275-5) With PCM decoding and real surround sound eect.
2.4 GHz wireless for rear speakers. Modern design / Easy to install / Remote cont rol operation.
Important Safety Instructions
Important Safety Instructions
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable par ts inside. Refer servicing to qualied personnel only.
Explanation of Graphical Symbols:
The lightning ash within an equilateral triangle is intended to aler t you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sucient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (ser vicing) instructions in the lite rature accompanying the product.
To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free per formance and listening pleasure.
Important Notes
Safety and operating instruction manual should be retained for future reference.
The apparatus should not b e exposed to dripping or splashing or placed in a humid
atmosphere such as a bathroom.
Places exposed to direct sunlight or close to radiators.
On to p of other stereo equipment that radiate too much heat.
Blocking ventilation or in a dusty area.
Areas where there is constant vibration.
Humid or moist place s.
Do not place near candles o r other naked ames.
Operate the product only as instructed in this manual.
Before turning on the power for the rst time, make sure the power adaptor is p roperly
connected.
For safe ty reasons, do not remove a ny covers or attempt to gain access to the inside of the produc t. Refer any servicing to qualied personnel. Do not at tempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualied service personnel.
01
01
SBW500
Safety Instructions
Read Instructions - All the safety and operating instructions must be read before
1.
the produc t is operated.
2.
Retain Instructions - The safety and operating instructions should be kept with the
produc t for future reference.
Heed warnings - All warnings on the product and in the operating instructions
3.
should be adhered to.
4.
Follow instructions - All operating and users’ instructions should be followed. Installation - Install in accordance with the manufacturer's instructions.
5. Power sources - This product should be operated only from the type of power
6.
source indicated by the mar king adjacent to the power cord entry. I f you are not sure of the t ype of power supply to your home, consult your product dealer o power company.
7.
Grounding or polarization - the product is not required to be grounded. Ensure
that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord tted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will t onto the power outlet only one way. This is a safet y feature. If you are unable to insert the plug fully into the outlet, tr y reversing the plug. If the plug should still fail to t, contact your electrician to replace your obsolete outlet. D o not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be tted with the appropriate molded plugs and carry safet y approval appropriate to the country of use.
8.
Power cord protection - Power-supply cords should be routed so that they are not
likely to be walked on, kinked or pinched by items placed on or against them, paying par ticular attention to cords from plugs, receptacles and the point where they exit from the product.
9.
Overloading - Do not overload wall outlets, extension cords, or multiple sockets, as
this can result in a r isk of re or electric shock.
10.
Ventilation - The product must be properly ventilated. Do not place the product on
a bed, sofa, or other similar sur face. Do not cove r the product with an tablecloths, newspapers, etc.
Heat - The product should be situated away from heat sources such as radiators,
11.
heat registers, stoves, o r other products, including ampliers that produce heat. No naked ame sources, such as lighted candles, should be placed on the apparatus.
Water and moisture - To reduce the risk of re or electr ic shock, do not expose the
12.
produc t to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundr y tub, in a wet basement or near a swimming pool (or similar).
y items such a s
r local
02
SBW500
Objec t and Liquid Entry - Never push objects of any kind into this product through
13.
openings, as they may touch dangerous voltage points or short-circuit parts that could result in a re or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
14.
Cleaning - Unplug the product from the wall outlet before cleaning. Dust in the
woofer may be cleaned with a d ry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.
Attachments - Do not use attachments not recommended by the product
15.
manufacturer, as they may cause hazards.
Accessories - Do not place this product on an unstabl
16.
or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the produc t should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.
Moving the product - A product and cart combination should be moved with care.
17.
Quick stops, excessive force and uneven sur faces may cause the product and car t combination to over turn.
Unused periods - The power cord of the appliance should be unplugged from the
18.
outlet during lightning storms or when the apparatus is left unused for a long period of time.
Serv
19.
20.
21.
22.
23.
24.
25.
icing - Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all ser vicing to qualied service personnel. Please remove the power plug for m the main power source or wall power source when not in use. When plugged in to a power source, the system is in standby mode, so the power is not entirely cut o. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in re, electric shock or other hazard s. Mains fuses - For continued protection against re hazar cor rect type and rating. The correct fuse specication for each voltage range is marked on the product. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played. The only means o f completely disconnecting the produc t from the power supply is by removing the power cord f rom the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the produc t is in use. Try to install the product near a wall socket or extension cord and shall be easily accessible.
e cart, stand, tripod, bracket
d, use fuses only of the
03
SBW500
26.
The highest e nvironmental temperature suitable for this product is 35°C.
ESD hints - If the product maybe reset or not reset to operation of control due to
27.
electrostatic discharge, just switch o and reconnec t again, or move the produc t to another location.
28.
Battery
1).
The b atteries must not be exposed to excessive heat such as sunshine, re or the like. The b atteries should be drawn to the environmental aspects of battery
2). disposal.
3).
Batter y usage CAUTION-to p revent batter y leakage which may result in body injuries, p ropert y damage, or damage to the apparatus: Install all batteries correc tly, + and – as marked on the apparatus. Do not mix batteries (old and new or carbon and alkaline, etc.) Remove b
ERP 2- (Energy Related Products Directive) note:
This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regarding to standby and o mode elec tri c power consumption of elec tronic household and oce equipment. After 15 minutes without a ny audio input, the system will automatically switch i nto standby mode. Follow up the instruction manual to resume the operation.
Important note:
This device is equipped with an energy saving mode: if no signal is given during 15 minutes the device will switch automatically into standby mode in order to save energy (ERP 2 standard). Please note that low volume setting in the audio source may be recognized as “no audio signal” : this will aect the capabilit device and can also or iginate an automatic switch into standby mode. I f this happens please reactivate the audio signal transmission or increase the volume setting on the audio source player (DVD player, TV, etc.), in order to resume playback. Please contact the local service center if the problem remains.
atteries when the unit is not used for a long time.
y of signal detection from the
04
SBW500
Warning
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and k nowledge, unless they have been give n supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
1.
To prevent possible hearing damage, do not listen at high volume levels for long time periods respec tively a sudden high volume level.
2.
Never use the device unsupervised! Switch o the device whenever you are not using it, even if this only for a short while. The appliance is not intended to be operated by means of an external timer or
3. separate remote control system. If the supply cord is damaged, it must be replaced by the manufacturer, its service
4. agent or similarly qualied persons in order to avoid a hazard.
5.
Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply. The unit should not b e impeded by covering the ventilation opening with items
6. such a
s newspaper, table-cloths, curtains etc. M ake sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit. The apparatus must not b e exposed to dripping or splashing and that objec ts lled
7. with liquids, such as vases, must not be place d on the apparatus. To prevent re or shock hazard, do not expose this equipment to hot place s, rain,
8. moisture or dust. Do not locate this unit near any water sources e.g. taps, bathtubs, washing
9. machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
10.
Do not place this unit close to a strong magnetic eld. Do not place the unit on a amplier or receiver.
11.
12.
Do not place this unit in a damp area as the moisture will aect the life of electric components.
13.
If the system is broug damp room, moisture may condense on the lens inside the player. If this occurs, the sys tem will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates. Do not attempt to clean the unit with chemical solvents as this might damage the
14. nish. Wipe with a clean, dry or slightly damp cloth. When removing the power plug from the wall outlet, always pull directly on the
15. plug, never pull on the cord. Depending on the electromagnetic waves used by a television broadcast, if a TV is
16. turned on near this unit while it is also on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from
17.
The mains plug i s used as the disconnect device, the disconnec t device must remain readily operable.
ht directly from a cold to a warm location, or is placed in a very
the TV set.
05
Loading...
+ 14 hidden pages