Florida RD 168 US
Nevada RDM 168 US
Alaska RDM 168 US
Operation instructions
15
14
1213
11
1
10
22
3
4
59
2
1
2
6
Thummer™ III Steering Wheel Remote Control (sold separately)
Commande à distance Thummer™ III (optionnelle)
Funcionamiento del control remoto Thummer™ III (opcional)
11
Funcionamento do Controle Remoto Thummer™ III (opcional)
– RDS (FM/AM) EON
– PTY (station search by program type)
– Codem D reception model
– 30 storage areas
– Clock (exact time controlled by RDS
with automatic daylight savings setting)
– Hicut (reduced interference when re-
ception is difficult)
Nevada RDM 168
Nevada RDM 168 with multi-tone orange
display
Same features as Florida RD 168, but in
addition:
– Equalizer for setting of low and middle
frequencies (1 band equalizer, bass
logic)
– Source tone memory (customized tone
setting of each signal source (Radio,
CD, CD changer) is stored automatically for the respective signal source)
– Connection of remote control possible
– Telephone mute (muting during phone
call)
– Disc management system
(Control of a connected CD changer
possible)
– AUX function (connection of an exter-
nal signal source (e.g., a walkman)
possible)
Alaska RDM 168
Alaska RDM 168 with multi-tone yellow and
green display
Same features as Nevada RDM 168, but in
addition:
– Equalizer for setting of low, middle,
and high frequencies (digital parametric equalizer / 2 band)
– Sharx (automatic IF bandwidth switch-
ing to reduce interference from adjacent stations)
– CD naming (possibility of naming the
CDs in the CD changer to be able to
list them on the display)
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
5
Quick reference
“Press” means a momentary press of less
than 1/2 second. All presses requiring more
than 1/2 second are followed by a beep.
(Beep for all button presses available
through Direct software Control Menu.)
1 Power On/Off:
Press the On/Off button in the center
of the level volume control or inserting
a disc into the unit - the face must be
installed and the ignition must be on.
The unit operates at the preset volume
level.
Power on/off when ignition is on:
When unit on, the unit can be turned
off and then on again through the car
ignition.
Last-used source becomes active unless unit is turned on by inserting disc,
in which case CD player becomes active.
Power on when ignition is off:
The unit (with faceplate installed) can
be operated again as follows when the
ignition is off:
The unit is turned on by pressing the
On/Off button in the center of the volume level control.
In order to protect the car battery, the
unit will automatically stop playing after
approximately one hour.
2 Adjusting the volume:
The unit will operate at the preset volume level when it is turned on. The
volume is changed by adjusting the
loudness control.
Turn control to right to increase volume level. Turn control to left to decrease volume level.
Press On/Off button to temporarily reduce volume. “Mute” appears and volume level returns to the mute value set
in the DSC menu.
To clear the mute function, press the
On/Off button again or adjust the level
control.
The mute function for reducing the volume level and the preset volume level
of the unit can be changed according
to the instructions under “Programming
with DSC”.
3 AF
To turn the AF function on/off:
Press the RDS key for approximately
2 seconds. You will hear a beep and
“AF” appears.
With the assistance of RDS the unit
will search for an alternative frequency
that provides better reception for the
station presently being listened to.
The AF function is turned off by pressing the RDS key for approximately
2 seconds.
After the beep the display will no longer display the letters “AF”.
3 RDS
By briefly pressing the RDS key you
can switch from the display of the station frequency to the name of the station (if available).
4 PTY
Program type = program mode
“PTY” turns the station keys to program type keys. Each station key allows you to choose a program type
such as news, sports, rock, pop, education, etc. Once PTY is activated, the
toggle switch << >> is able to call all
program types. To activate press on
the PTY key and “PTY” appears. Press
the PTY key again to disactivate.
6
5 BA
To switch between the storage levels/
frequency band areas FM 1, FM II, TS
(Travelstore) AM, and AM Travelstore.
Additional Travelstore features:
To activate Travelstore press the BA
key until you hear a beep and
“T-STORE” appears.
TS stores the six strongest stations.
6 Station keys 1 - 6
Radio operation
At each storage level (I, II, and “T”) of
the FM area, you can store up to six
stations.
You can also store 6 stations in the
AM area and the AM Store area.
Preset Station Storage
Set the radio to the station to be
stored. Press the station key where the
station should be stored (program will
be muted) and hold down the key until
the program can be heard again and
the beeping stops.
Preset Station Selection
To set the frequency band area and
choose the desired storage level (FM,
AM or FM/AM Travelstore) press one
of the six preset stations. You can listen to the station stored there.
Additional features of the preset
station keys
To store and select the PTY program
type.
After activating PTY (“PTY” appears in
the display), you can store and select
a program type (e.g., rock, pop, classical, news, etc.) on each station key in
FM operation.
CD operation
3/II pause
Press station key number 3 and the
current CD program will be switched
and “pause” appears. Press station
key 3 again to stop pause.
4/RPT repeat
CD titles can be played repeatedly.
You are able:
To repeat the presently playing title
(“REPEAT-T”) or all titles of the CD
you are presently playing (“REPEATD”).
When the RPT function is activated the
display lights up with “RPT”. After
choosing the repeat function and after
each title change, the display will brief-
ly show “REPEAT-T” or “REPEAT-D”.
REPEAT-T on:
• Press “4/RPT”.
REPEAT-D on:
• Depress “4/RPT” and hold.
To turn “RPT” off: Press “4/RPT”.
5/Mix operation
Press station key 5 to turn on the mix
operation for the currently playing CD.
This will cause the titles of this CD to
be played in a random sequence. “MIX
CD” appears and the word “MIX” will
fade in at the bottom of the display.
Pressing station key 5 again to disactivate this function.
5/Mix operation of the CD changer
CD titles can be played in random sequence.
You are able to:
Play all titles of a CD (“MIX-CD”) or all
titles of all inserted CDs (“MIX-ALL”) in
random sequence.
When the MIX function is activated,
“MIX” appears.
After switching to this function and after each title change, the display will
briefly show “MIX-CD” or “MIX-ALL”.
MIX-CD on:
• Press “5/MIX”.
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
7
MIX-ALL on:
• Hold “5/MIX” depressed.
Press “5/MIX” to disactivate MIX.
7 Clock display
Press the DIS key when the unit is
turned on and the current time will be
shown for approximately 8 seconds.
Additional features of the clock display
Press and hold DIS key until it beeps
which will result in a permanent time
display.
When carrying out other functions, the
time display will be masked for approximately 8 seconds.
8 DSC (direct software control)
You can customize certain basic unit
settings with DSC. Additional information can be found in the section “Programming with DSC”.
9 AUD
This key activates the tone setting
menu. You can set different tone settings for each operation mode. The last
setting for each operation mode will be
stored. (This applies only to the Nevada RDM 168 and the Alaska RDM
168.)
Setting treble (high tones) and bass
(low tones):
Press the AUD key once. The display
will show “BASS” and you can change
the setting by pressing the toggle
switch either to the left or right.
You can change the treble setting by
pressing the rocker switches either up
or down while the display shows “TREBLE”.
The display will show the chosen values. The last value will be stored.
Press the AUD key to disactivate.
The AUD setting will end automatically
if there is no change within 8 seconds.
Setting balance (left/right) and fader
(front/back):
Press the AUD key two times.
By operating the rocker switches up or
down you can set the volume ratio between the front and the back speakers.
At the same time the display will indicate “FADER”.
Press the toggle switches to the left
and right to adjust the volume. At the
same time, the display will indicate
“BALANCE”.
The display will show the selected values. The last value will be stored.
Press the AUD key to turn off.
The AUD setting will be end automatically if there is no change within 8 seconds.
9 LD - loudness
To set the low tones appropriate for
the human ear at low volume levels.
Press the AUD key to turn the loudness function on/off and hold the key
down until you hear a beep. In units
with source tone memory, the loudness function can be turned on and off
for each signal source independently.
: Toggle switch
Radio operation
Automatic tuning
/Station search
up
down
Manual tuning
<< >> incrementally up/down
(in FM only when AF turned off)
8
In FM only:
<< >> Scrolling through the station chains
when AF is on (e.g. NDR1,2,3,4,
N-Joy ...) .
CD operation
Select title
up
down
By pressing once, the currently playing
title will start from the beginning.
>> Fast forward, audible
Hold depressed as necessary
<< Fast reverse, audible
Hold depressed as necessary
Additional functions of the toggle
switch:
Possible other settings with
AUD9
DSC Mode8
PTY4
The respective function must be activated.
; SRC
“SRC” (source)
This key allows you to switch between
the operation modes Radio, CD and a
CD changer (if one is connected).
; SC Scan
Radio operation
Press the SC key for approximately
2 seconds.
You will hear a beep and the display
will alternate between “SCAN” and the
abbreviated name of the scanned station. All FM stations that can be received will be briefly scanned.
PTY scan:
The PTY scan can only be started if
PTY is turned on. (The display will
show “PTY”.)
Press the SC key for approximately
2 seconds.
You will hear a beep and the display
will alternate between “PTY SCAN”
and the abbreviated name of the
scanned station.
The stations with the selected program
type will be briefly scanned.
Stop Scan / PTY: Press the SC key.
CD changer
Press the SC key for approximately
2 seconds. You will hear a beep and
the display will show “SCAN”. Each title of each CD will be briefly scanned
sequentially.
Stop CD Scan: Press the SC key.
CD Changer
Press the SC key for approximately
2 seconds. You will hear a beep and
the display will show “SCAN”. Each title of each CD will be briefly scanned
sequentially.
Stop CD Scan: Press the SC key
again.
< Inserting CD
After inserting the CD with the label
facing up, it is automatically transported to the operating position. The unit
automatically switches and plays the
content of the inserted CD.
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
9
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.