Milano MP287 648 493 110
Monte Carlo MP287 648 483 110
San Remo MP287 648 491 110
Bedienungs- und Einbauanleitung
Operating and installation instructions
Mode d’emploi et de montage
Istruzioni d’uso e di installazione
Gebruiksaanwijzing en inbouwhandleiding
Bruks- och monteringsanvisning
Milano/Monte Carlo MP28
23
1
16
San Remo MP28
23
1
15
4
4
6
5
14
6
5
13
7
7
8
9
12
8
9
10
10
11
14
15
16
Milano/Monte Carlo/San Remo MP28
17
13
12
18
11
19
2
Controls
1 button
Opens the detachable control panel
(fl ip-release panel).
2 Rocker switch
3 MENU button
Calls up the menu for basic settings.
4SRC button
Source selection between radio, CD
and AUX.
5 Volume control
6 On/Off button
Short press: Switches the device on. In
operation: Mutes the device.
Long press: Switches the device off.
7 Display
?
arrow button
Short press: Radio mode: manual
search in selected frequency band.
CD/MP3/WMA mode: next track.
Long press: Radio mode: automatic
seek tuning in selected frequency
band.
CD/MP3/WMA mode: fast forward.
@
arrow button
Short press: Radio mode: manual
search in selected frequency band.
CD/MP3/WMA mode: previous track.
Long press: Radio mode: automatic
seek tuning in selected frequency
band.
CD/MP3/WMA mode: fast reverse.
A CD tray
ENGLISH
8DIS button
Changes display contents.
9TS button
Starts the Travelstore function.
: AUD button
Sets bass, treble, middle, balance, and
fader.
Switches X-BASS on/off and adjusts it.
Selects an equalizer presetting.
; AUX input
< TA button
Starts the traffi c announcement function. Traffi c announcements have priority over radio or CD mode.
= Numeric keypad
B Reset button
Can be activated only with a pointed
object.
C
button (eject)
Ejects the CD from the device
>BAND
button
Selects the FM memory banks and the
MW and LW wavebands.
29
Contents
About these instructions .................. 32
Symbols used................................32
Use as directed ..............................32
Declaration of conformity ................32
For your safety ................................ 33
If you are installing device yourself .... 33
Observe the following! .................... 33
Cleaning instructions ...................... 33
Disposal of old unit ........................33
Scope of delivery ............................. 34
CD ...............................................53
Preamp Out .................................. 53
AUX input sensitivity ...................... 53
ENGLISH
Installation instructions ................ 156
31
About these instructions
About these instructions
These instructions contain important information to easily and safely install and operate the device.
•
Read these instructions carefully and
completely before using the device.
•
Keep the instructions at a location so
that they are always accessible to all
users.
•
Always pass on the device to third parties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this device.
Symbols used
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN
slot. Observe the performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a specialist.
Declaration of conformity
The Blaupunkt GmbH declares that the device complies with the basic requirements
and the other relevant regulations of the directive 89/336/EWG.
These instructions employ the following
symbols:
CAUTION!
Warns about laser beam
DANGER!
Warns about injuries
CAUTION!
Warns about damaging the CD
drive
The CE mark confi rms the compliance with EU directives.
Identifi es a sequencing step
쏅
Identifi es a listing
•
32
For your safety
For your safety
The device was
the state of the art and established safety
guidelines. Even so, dangers may occur if
you do not observe the safety notes in these
instructions.
If you are installing device
yourself
You may only install the device yourself if
you are experienced in installing car sound
systems and are very familiar with the electrical system of the vehicle. For this purpose, observe the installation instructions
at the end of these instructions.
Observe the following!
manufactured according to
In operation:
•
Operate the device only if traffi c situation permits it! Stop at a suitable location to perform more extensive operations.
•
Remove or attach the control panel only
while the vehicle is standing an.
•
To protect your hearing, always listen
at a moderate volume. During mute
phases (e.g. when changing the audio
source), changing the volume is not audible. Do not increase the volume during this mute phase.
•
Always listen at a moderate volume so
that you can always hear acoustic warning signals (e.g. police).
After operation:
•
The device is worthless to a thief with-
ENGLISH
CAUTION!
The device contains a Class 1 laser
that can cause injuries to your eyes.
Do not open the device and do not perform
any modifi cations.
DANGER!
Increased risk of injury from
connector
In case of an accident, the protruding connector in the front AUX-IN socket may cause
injuries. The use of straight plugs or adapters can lead to an increased risk of injury.
It is, therefore, recommended to use
•
angled jack plugs, e.g. the Blaupunkt
accessories cable (7 607 001 535).
out the control panel. Always remove
the control panel whenever you leave
the vehicle.
•
Transport the control panel so that it is
protected against impacts and the contacts cannot become dirty.
Cleaning instructions
Solvents, cleaning and scouring agents as
well as dashboard spray and plastics care
product may contain ingredients that will
damage the surface of the device.
Use only a dry or slightly moistened cloth
for cleaning the device.
Disposal of old unit
Do not dispose of your old unit in the
household trash!
Use the return and collection systems available to dispose of the old device.
33
Scope of delivery Warranty
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Support frame
2 Disassembly tools
1 Perforated strips
1 Case
1 Operating instructions
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
Remote control
Warranty
We provide a manufacturer's warranty
for products bought within the European
Union. For devices purchased outside the
European Union, the warranty terms issued
by our respective responsible domestic
agency are valid.
The warranty terms can be called up under
www.blaupunkt.com or requested directly
from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim, Germany
Service
The steering wheel and/or handheld remote
control allows you to access the basic functions of your car sound system safely and
conveniently.
You cannot switch the device on/off using
the remote control!
You can fi nd out from your Blaupunkt dealer
or on the Internet at www.blaupunkt.com
which remote controls can be used with
your car sound system.
Amplifi er
You can use all Blaupunkt and Velocity amplifi ers.
In some countries, Blaupunkt offers a repair
and pick-up service.
Information about the availability of this
service in your country can be found at
www.blaupunkt.com.
If you want to take advantage of this service, you may request a pick-up service for
your device via the Internet.
34
Detachable control panel
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (fl ip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hidden place.
Notes:
•
Never drop the control panel.
Notes:
The device switches off as soon as the
•
control panel is removed. The device
remembers the audio source played
last for the next switch-on.
Any CD already inserted in the device
•
remains there.
Attaching the control panel
1.
2.
3.
ENGLISH
•
Do not expose the control panel to direct sunlight or another heat source.
•
Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, clean the contacts with a
lint-free cloth moistened with cleaning alcohol.
Detaching the control panel
press the button 1.
쏅
The control panel opens to the bottom.
1.
2.
Insert the control panel on the right
쏅
side and press it slightly to the right
(see Figure 1.).
Carefully press the control panel into
쏅
the left bracket until it engages (see
Figure 2.).
Fold the control panel up into the slot
쏅
and press it gently into place until it engages (see Figure 3.).
If the device was still switched on when you
detached the control panel, it will automatically switch on with the last setting activated (radio, CD or AUX) when the panel is
replaced.
Grasp the control panel at the left side.
쏅
Push the control panel slightly to the
쏅
right and then pull it straight out of the
bracket.
35
Timeout function Activating/deactivating
Timeout function
The device features a time-out function
(time window).
For example, if you press the MENU but-
ton 3 and select a menu item, the device
switches back after approx. 5 seconds after
the last button activation. The settings performed are saved.
Switching on/off
You can switch on the device with any button.
Switching on/off
To switch on the device,
press any button.
쏅
The device switches on.
쏅
To switch off the device, press and hold
down the On/Off button 6 for longer
than 2 seconds.
The device switches off.
Switching on/off using the
vehicle ignition
The device will switch on/off simultaneously with the ignition if the device is correctly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by pressing the On/Off button 6.
Switching off with detachable
control panel
Detach the control panel.
쏅
The device switches off.
Note:
To protect the vehicle battery, the device will switch off automatically after
one hour if the ignition is off.
36
Volume
Adjusting the volume
You can adjust the volume in increments
from 0 (off) to 100 (maximum).
To increase the volume,
쏅
turn the volume control 5 clockwise.
To decrease the volume,
쏅
turn the volume control 5 counterclockwise.
Power-on volume
When you switch off the device, the volume
selected last is stored.
When you switch on the device, the stored
volume is selected.
Quickly reducing the volume
(MUTE)
You can quickly reduce the volume to a
preset level.
Briefl y press the On/Off button 6.
쏅
The display shows "MUTE".
There are hands-free systems that activate
the mute function of the radio with a LOW
signal (0 V) or HIGH signal (12 V). This information can be found in the operating
instructions of your hands-free system. In
the menu, you can select whether the radio
should mute during an incoming call using a
HIGH or a LOW signal:
쏅
Press the MENU butt
Press the
쏅
edly until "TEL MUTE" appears on the
display.
Press the
쏅
"HIGH/LOW/OFF".
Note:
"HIGH" means that the de
with an incoming HIGH signal.
"LOW" means that the device mutes
with an incoming LOW signal.
"OFF" means that the volume is not
lowered during a call.
or button 2 repeat-
button ? to select among
on 3.
vice mutes
ENGLISH
Cancelling mute
To return to your previously set volume
level,
쏅
briefl y press the On/Off button 6
again.
Muting during telephone mode
If your car sound system is connected to a
cell phone, the car sound system is muted
when you answer a call.
Note:
During a phone call, no traffi c announcements are switched through.
When you have fi nished making your changes,
press the MENU button 3 or wait
쏅
5 seconds.
The settings are saved.
Switching the confi rmation beep
on/off
When you press certain buttons of the device, a confi rmation beep sounds. You can
switch the beep on or off. You can select
four volumes for the beep.
Press the MENU button 3.
쏅
37
Volume Radio mode
Press the
쏅
until "BEEP" appears on the display.
Press the
쏅
adjust the volume of the beep from
1 to 4.
To switch off the beep, press the
쏅
button @ repeatedly until "BEEP
or
OFF" appears on the display.
When you have fi nished making your changes,
press the MENU button 3 or wait
쏅
5 seconds.
The settings are saved.
or button 2 repeatedly
? or button @ to
?
Radio mode
This device is equipped with an RDS radio
receiver. Many of the receivable FM stations
broadcast a signal that not only carries the
programme but also additional information
such as the station name and programme
type (PTY).
The station name appears on the display as
soon as the tuner receives it.
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select between Europe ("EURO"), America
("USA") and Asia ("ASIA"). The tuner is factory-set to the region in which it was sold.
If you experience problems with your radio
reception, please check this setting.
Note:
The radio functions described in these
operating instructions refer to the
tuner setting for Europe (EURO). If
you switch to a different region (ASIA,
USA), the user settings are lost.
쏅
Press the MENU button 3.
쏅
Press the
edly until "AREA EURO", "AREA USA"
or "AREA ASIA" appears on the display.
Select your tuner region with the but-
쏅
ton
? or @.
or button 2 repeat-
38
Press the MENU button 3 or wait
쏅
5 seconds.
The settings are saved.
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.